trip hazard deitsch

What is a Trip Hazard and 7 Steps to Avoid One

Worker safety is paramount in today’s ultra-competitive and fast-moving working environment. However, job sites expose team members to several risks, few more prevalent than a trip hazard.

Slips, trips, and falls are often common occurrences on the worksite and a cause of injury. Employers must recognize, assess, and remove trip hazards from the workplace to lower the risk of workplace injuries and provide an environment that encourages productive work.

This article defines a trip hazard and discusses seven strategies to identify, assess, and remove one.

What is a Trip Hazard?

A trip hazard occurs when a worker’s foot strikes or lands on something dangerous. These hazards include a sunken or elevated walkway, a sudden rise, a slippery surface, and other conditions.

7 Ways to Prevent a Trip Hazard

1. remove obstacles in walkways.

Injuries often occur when workers trip over objects – such as waste, building materials, and equipment – left in designated walkways on the worksite.

The best way to prevent this risk is to support proper cleanliness in busy work and traffic areas, which might include the following steps:

• Conduct periodic slip and trip hazard
• Avoid stringing cords, cables, or air hoses across walkways.
• Keep all work areas clean and orderly.

2. Maintain Floor Safety

Fall protection involves more than just cleaning up spills from the floor. It also entails paying attention to the surfaces’ standards for walking and working.

Changing the floor area can help ensure safety from trips, slips, and falls. The following suggested practices can help businesses improve the quality of their floors:

• Invest in non-slippery, durable flooring.
• Set up mats, pressure-sensitive abrasive strips, paint-on coatings with abrasives, and synthetic decking. They offer sufficient friction and lessen foot stress.
• Regularly check floors for dangers that could cause trips and falls, such as cracks, holes, missing blocks, and uneven surfaces.

3. Wear Proper Shoes

Footwear can have a significant impact on preventing falls, and safety teams should consider the following to avoid trip hazards:

• The type of heels worn
• How smooth the bottoms are
• How the shoelaces are tied

Additionally, when management reviews a fall-related injury, they must assess footwear worn at the time, decide if it played a role in the incidence, and require that workers switch to shoes that are right for the responsibilities of their job.

4. Use Signage

Signage is a valuable warning system for many worksite risks, especially trip hazards. There are two sign types safety teams can use to prevent falls:

• Temporary signage. Safety teams should establish temporary warning signs while addressing a new trip hazard, such as removing walkway debris, cleaning up a spill, or repairing damaged floors. However, while these short-term signs help prevent injuries, management must address the hazard immediately.
• Permanent signage: A permanent sign can help warn workers to watch out for unavoidable hazards, such as uneven ground. However, safety teams should use these only when necessary because workers might ignore a cluster of signs or ones they see daily.

5. Ensure Proper Lighting

Workers need to be able to see their surroundings to avoid slips, trips, and falls, and poor lighting on job sites makes that problematic. Safety teams can help make work sites more visible through the following strategies:

• Repair switches and cords immediately after they stop working.
• Use sufficient lighting in walkways, hallways, and on staircases and ramps.
• Clear the area around light switches and ensure they are easily accessible.
• Instruct workers to turn on the light before entering a dark room.

6. Provide Trip Hazard Training

Educating workers on finding and preventing a trip hazard will help keep them safe, and safety teams should provide them with detailed instructions on the conditions they’ll work in and the dangers they’ll encounter.

Furthermore, management should conduct regular safety meetings or presentations, which are a terrific way to update the team on newly implemented safety measures or to remind them about seasonal concerns.

7. Develop safety plans

All efforts to promote fall prevention, especially in high-risk workplaces, are solidified by a well-thought-out safety strategy, which might include the following steps:

• Developing safety practices and standards
• Conducting trip hazard assessments
• Performing periodic maintenance inspections
• Studying specifications for safety equipment

Along with these recommendations, safety officers, onsite workers, and authorized staff can hold frequent toolbox discussions about trip hazards. These safety lectures can increase team members’ awareness and highlight the risks involved with their jobs, giving them better protection against accidents caused by slips, trips, and falls.

Preventing Trip Hazards Requires the Best Safety Solutions

In the workplace, trip hazards are relatively common and, unfortunately, can cause severe injuries. Management must do its best to identify and eliminate potential risks to ensure workers perform their duties safely by considering the abovementioned strategies.

The best employees want to work on the job sites of companies that put safety first, and those employers who take these proactive steps to remove hazards demonstrate their concern for workers, contribute to developing a culture of safety that helps everyone involved, and attract better talent.

Consider partnering with us to tailor a solution that helps you create a safer workplace for your workers, customers, and visitors.

Contact us today to learn more.

Total supply chain risk management starts here

Talk to Sales

See related resources

Top Five Innovations in Oil and Gas Drilling

Periodic Inspections in Lockout/Tagout

Advanced Process Control: Optimizing Downstream Operations

Get useful resources. no fluff..

We’ll send you practical and insightful supply chain risk management info that can benefit your business. Plus, important company updates that keep you in the loop.

Understanding OSHA Regulations for Trip and Fall Hazards in the Workplace

Workplace safety isn’t just a good idea-it’s the law. In industries where the risk of trip and fall hazards is substantial, strict regulations exist to safeguard employees.

The fines for non-compliance can be hefty, but more importantly, adherence to these rules saves lives and prevents injuries. Below are the key OSHA-mandated practices your organization needs to have in place to prevent falls and protect your team.

Table of Contents

Uneven Surfaces

Spills and clutter, poor lighting, improper footwear, fines and penalties, worker’s compensation, productivity loss, routine hazard assessments, barrier installation, safety training, maintenance protocols, immediate response, medical referral, incident investigation, understanding your rights, filing a claim, maximum settlements, reputation and experience, local expertise, client testimonials, proactive prevention, follow this guide to adhere to osha regulations for trip and fall hazards in your workplace, identifying common hazards.

The first step to a safer workplace is to carefully find potential hazards. Below are some of the most frequently encountered dangers:

Hazards, like cracked sidewalks, uneven floors, and loose tiles, can easily cause trips. They can trip even the most cautious employees. Proactively identifying and promptly repairing these surfaces is crucial for preventing accidents.

Spills in the break room and unattended boxes in hallways are commonplace. But, they pose significant trip hazards.

These are among the most preventable risks that, surprisingly, occur frequently. Implementing strict cleanliness and storage policies can help mitigate these dangers.

Areas with inadequate lighting can hide hazards that are noticeable in well-lit conditions. Ensuring regular maintenance and conducting thorough lighting audits can help mitigate these risks.

Employees need the right footwear for their jobs. These might be non-slip shoes for wet areas or steel-toed boots for construction sites. Good footwear reduces falls.

The Cost of Negligence

Knowing the cost of workplace accidents can motivate people to follow safety rules and OSHA guidelines. Here are key considerations:

Violations of OSHA standards , especially those related to fall hazards, can lead to hefty fines and penalties. Adherence to these regulations is not only a matter of legal compliance but also a financial imperative to avoid such costs.

Injuries resulting from falls can lead to significant worker’s compensation claims. This creates financial strain on the company’s resources and negatively affecting the bottom line.

The direct costs of accidents are often accompanied by indirect costs such as:

• downtime for investigations
• recovery periods for injured employees
• decline in team morale

All these can adversely affect overall productivity.

Fall Safety Protocols

Following OSHA’s fall safety rules through practical steps can greatly improve workplace safety. Here are some strategies:

Regular walk-throughs and safety inspections are good proactive approaches. They help find and fix hazards before they cause accidents.

Installing safety measures can prevent falls and save lives. They include:

• safety nets
• skylight screens

These measures are installed proactively in areas identified as high-risk.

Offer comprehensive education to employees about the risks associated with their specific roles. They must understand the importance of adhering to safety protocols. This can dramatically reduce the likelihood of accidents.

Develop and maintain a consistent schedule for the repair and upkeep of workplace infrastructure. This is vital in ensuring a safe and hazard-free working environment.

What to Do After an Accident

Preventing falls is crucial, but it’s only one aspect of a comprehensive safety strategy. Equally important are the procedures followed after a fall. These are critical to ensuring employee well-being and meeting legal requirements.

It’s vital that all staff are well-versed in the immediate actions to take following a fall. These steps include:

• securing the area to prevent incidents
• providing first aid if qualified
• reporting the incident to the appropriate personnel

After an accident, providing clear and accessible processes to receive medical help is essential. This not only aids in their recovery but also supports any potential workers’ compensation claims .

Conducting a thorough investigation into the cause of a fall is crucial. It’s not just about fulfilling a legal requirement. It’s an opportunity to uncover and address underlying issues, preventing future incidents.

The Role of Legal Representation

The complexities of navigating the aftermath of a slip-and-fall incident can be overwhelming. This makes legal representation a valuable resource. Here’s why:

A qualified legal team can provide invaluable guidance on your rights after a slip and fall injury. Their expertise ensures that you’re aware of your entitlements and the obligations of your employer.

The process of filing a claim can be daunting, with many legal intricacies. Legal experts can simplify the process, allowing you to focus on your recovery while they handle the legalities.

If a settlement succeeds, legal help is crucial to ensure you get the full slip and fall settlement amounts you’re due. This includes medical expenses and lost wages.

Find a Personal Injury Attorney

Finding the right legal support after an injury is paramount. Here’s how to find a reputable attorney:

Seek out attorneys with a proven track record in personal injury law, especially those with experience in slip and fall cases. Their past successes can give you confidence in their ability to handle your case.

Choosing local attorneys can have significant advantages. They bring a deep understanding of state regulations and local legal nuances, which can be beneficial in navigating your case. For instance, if you work in Virginia, or specifically in Virginia Beach, then you should work with personal injury attorneys near Virginia Beach .

An attorney’s reputation can offer valuable insights into their dedication and effectiveness. Good reviews and referrals show their commitment. They aim for the best outcomes for their clients.

Viewing OSHA regulations as the minimum standard, not the goal, is key to creating a safer workplace. Proactive measures include regular safety meetings to discuss new measures and best practices.

Cultivating a safety-first culture transforms the workplace, with everyone committed to security. Encourage employees to voice concerns for a collaborative safety approach, making it a collective responsibility.

Following OSHA’s trip and fall rules avoids penalties. It also creates a secure, productive work environment for your team.

By understanding these rules and tailoring them to your organization’s needs, you show a commitment to safety. This commitment resonates with your team and stakeholders. Remember, a fall shouldn’t be the first sign you need to reinforce your safety measures-it should be the last.

For more insights and guidance on a range of other topics, we invite you to browse our blog.

Lost Your Password?

Reset Password

• Toolbox Talks

What is a Trip Hazard and how do you prevent them?

• by Afnan Tajuddin
• Trip Hazard & prevention

Table of Contents

Trip hazards

Trips occur when your foot strikes or collides with something, causing you to lose your balance. In most situations, individuals trip over obstacles that aren’t visible, such as uneven flooring edges, messy equipment, tools, or cables.

Accidents from trips are among the most common causes of accidents at work! Trip hazards result in thousands of injuries every year. The most common ones are musculoskeletal, cuts, and bruises but more serious conditions can also occur such as fractures or dislocations 

You can’t have a safe and healthy work environment if people aren’t able to move around it freely.

Every day, you are tasked with performing tasks that require the use of your legs. Below I’ve listed common trip hazards and how to assess them so they don’t cause injury or accident.

Common trip hazards

• Cluttered environment and poor housekeeping
• Scattered tools, material, electrical cables & hose in workplace
• Lack of illumination
• Floor surfaces that are uneven or damaged or floor coverings that are unsuitable
• Obstructed view
• Failure to use handrails when climbing on the stairs

Safety Controls for trip hazards:

The incidence of trips in the workplace can be dramatically reduced by implementing policies to regulate behavior. Time pressures on employees who are completing tasks might cause them to rush through work or not pay attention which could lead them into dangerous situations if they do not know what precautions need to be taken when it comes down to hazards like poor housekeeping for example.

The most common type of walking hazard is the slip or trip. This can be prevented by making sure that employees have been trained on how to avoid these dangers. With the proper education, you can avoid trip hazards and reduce your risk of injury or accident. When workers are given training on trip hazards it can help them be more aware of the risks involved, as well as prevent injuries.

Housekeeping:

Housekeeping is the first step towards preventing trip hazards. Maintaining good house- Keeping includes material & waste management to keep your workplace safe for everyone

• Housekeeping and maintenance should be handled by dedicated workers, if necessary.
• At the workplace, sufficient trash containers in various locations must be provided with a distinct color code system for all trash containers.
• All workplaces must maintain the greatest possible degree of cleanliness in order to ensure a safe working environment and prevent incidents. In addition, Good housekeeping contribute to safe working conditions, while poor housekeeping is one of the most common causes of accidents.
• Before beginning a task, before ending shifts, and after finishing a job, the workplace should be clean. This must be noted and clearly defined on the Work Permit..
• Housekeeping should be given adequate time to ensure that the premises are well maintained.

Material & cable Management:

• Materials must be stacked or kept in a secure way that prevents sliding, falling, or collapse.
• Provide separate storage areas apart from working places
• Hoses, ropes, and electric cables should be arranged & should never be allowed to remain on walkways.
• Providing electrical outlets at worksite will help avoid risk of tripping over wires.
• Place equipment closet and electrical outlets where possible
• Avoid the use of extension cables if possible. Instead, use retractable reel that can be wrapped up when not in use and takes up less space.
• When trailing cables is used temporarily, it is important that they be properly secured. hang power cords over work areas rather than on floor, Use cable ties or hangers.

Illumination:

Poor illumination in the workplace is associated with an increase in accidents. Use proper lighting for walkways, stairs, and ramps to reduce accidents at workplaces where there’s no light source available such as basements or work in the nighttime; keep your space well lit by turns on before entering any dimly-lit rooms so you can see what surrounds you easily without bumping into anything while walking around aimlessly!

Walking Surfaces:

Floor surfaces that are uneven or damaged can present a trip hazard. Floors must be kept clean at all times. Stairways, gangways, passageways, and doorways should all be free of obstructions. Floor coverings with an improper safety measurement could also be dangerous, Damaged surfaces/floors are reported for rectification. Safety precautions should also be taken when covering them. A trip can happen at any time so take extra care!

Stairs / Ladder:

Handrails are important when climbing or descending stairs. Make sure that the Ladder you are using often has been inspected! Damaged rungs also lead directly towards trips. stairs should be kept clean and tidy.

Trip Hazard Sign:

Trip Hazard Sign is a cautionary signal to protect from potential trip hazards. It does not substitute for maintaining personal safety, but instead helps communicate that there are things close by which can cause injury or accident if you weren’t careful enough with what you’re doing!

Responsibilities:

Employer responsibilities:.

Employers have a responsibility to control & manage trip hazards. This includes:

• Visiting workplaces and conducting workplace-specific risk assessments .
• To ensure that obligations are fulfilled, it is important to carry out periodic audits as needed.
• Ensure that employees are adequately trained and instructed.
• That suitable arrangements, are in place to maintain site tidiness to a high standard.
• To monitor daily site conditions and ensure that any remedial actions are implemented through his organization.

Employees responsibilities:

Employees also have responsibilities in relation to controlling the risk from trip hazards including: 

• Report anything dangerous, e.g. damaged flooring.
• Keep care of the working environment in which they are working;
• Remove all unnecessary tools and equipment from the work site and return them to the stores.

Regulation about trip hazards:

Workplace health, safety and welfare. Workplace (Health, Safety and Welfare) Regulations 1992

OSHA – Walking-Working Surfaces – 1910.22

Share this:

2 thoughts on “what is a trip hazard and how do you prevent them”.

very nice and helpful

Leave a Reply Cancel reply

19th July, 2023

The Simple Guide To Slip And Trip Hazards At Work

In this simple guide to slip and trip hazards at work, we will look at some examples of slip and trip hazards, and the best ways to prevent those hazards from creating slips and trips in your workplace.

Slip and trip hazards probably won't be top of your health and safety concerns at work. But managing slip and trip hazards is a quick, easy (and often cheap) way to improve health and safety in your workplace.

30% of workplace injuries in the UK were caused by slips, trips and falls on the same level in 21/22, according to HSE statistics . That's over 150,000 reported accidents!

And that's just the reported injuries, where people were seriously injured. Most slips and trips probably don't get reported.

In this simple guide to slip and trip hazards at work, you can find some common examples of slip and trip hazards, and how to control them so you and your team don't become one of the 400+ people injured at work each day in the UK.

We'll start with trip hazards.

What is a trip hazard?

A trip hazard is something that could trip you up. The curled-up edge of a mat on your floor is a trip hazard. The cable running across your office is a trip hazard. The sticky-out corner of your desk could be a trip hazard. Anything left on the floor, that shouldn't be there, is probably a trip hazard.

And your trip hazards can trip people up, literally.

The more trip hazards you have, the more likely someone will trip up at some point. Any trip hazard could be an accident waiting to happen .

Examples of trip hazards

We've already discussed some trip hazards above. Before you keep reading, take a quick look around you. Can you see any trip hazards?

How many could you see? I bet you spotted a few. Trip hazards can be found in most places, here are some common examples of trip hazards at work:

• Uneven floors
• Trailing cables
• Obstructions
• Loose flooring
• Loose footwear
• Poor housekeeping
• Poor lighting
• Changes in floor level
• Untied shoelaces
• The straps of a bag

How to control trip hazards

The examples above might seem common, and some even unavoidable, but they shouldn't be ignored. Even small trips can cause serious injuries .

Not every trip hazard will create a huge risk, but by controlling the hazard, you can reduce the risk .

You can control trip hazards by:

• Removing them
• Moving them
• Fixing them
• Highlighting them

Remove trip hazards

If trip hazards can be removed, they should be. Very often, trips are caused by something being left on the floor that shouldn't be there.

And because it's not usually there, no one expects it, and so they trip over it!

For example, discarded packaging from your work might be creating a trip hazard for other people walking through your work area. By keeping your work area tidy and disposing of waste immediately, you help create a safer environment for yourself and others.

Removing a hazard is the best way to eliminate the risk. You can't trip over something that's not there.

Move trip hazards

You might not be able to remove a trip hazard, as it might be something that's needed.

For example, you can't dispose of a trailing cable if you need to be able to plug in the equipment you are using. But you can re-route the cable so that it doesn't cross a walkway.

Fix trip hazards

Some trip hazards don't need to be removed, but they can be fixed. For example, a pothole in a walkway can be fixed by resurfacing or filling the hole. Or a frayed carpet edge can be replaced.

Sometimes, a temporary fix might be all that's necessary. For example, putting a cover or ramp over a trailing cable or an uneven surface.

Highlight trip hazards

If something can't be removed, you could highlight it instead. Trips usually happen when the hazard is not expected.

If you can warn people of the hazard, e.g. making a stair tread a contrasting colour or making sure that lighting is good in walkways, it helps people to see the hazard before it trips them up.

What is a slip hazard?

A slip hazard is any hazard that creates a risk of slipping. The rainwater coming in on people's shoes is a slip hazard. The floor wet from being mopped is a slip hazard.

And it's not just water and liquids that are slip hazards. The smooth soles of your shoes could be a slip hazard. A dusty floor can be a slip hazard.

Slip hazards, as the name suggests, can make people slip.

Skip hazards are usually created by something temporary, like rain, ice, dust, cleaning, or leaks.

Examples of slip hazards

We've mentioned a few slip hazards above. Before you keep reading, can you think of any more?

Think about your workplace and different weather events or the different activities that happen. Do any slip hazards get created?

How many could you think of? Here are some common examples of slip hazards at work:

• Slippery floors
• Dusty floors
• Loose floor coverings
• Slippery soles
• Icy conditions

How to control slip hazards

Like trip hazards, slip hazards being present are a sign that people could get hurt. Broken legs, backs, arms and even head injuries can happen as a result of slip hazards being uncontrolled.

If you control the hazard, you can reduce the risk, and prevent slips in your workplace.

You can control slip hazards by:

• Preventing them

Prevent slip hazards

Slip hazards can occur due to new situations, rather than being permanent.

For example, a floor might not usually be slippy, but during wet weather, people's shoes bring rainwater in creating a slippery surface. Or during winter puddles may freeze.

While these slip hazards are not permanent, they can be predictable. If you have a tiled floor or smooth floor near an entrance, it's likely to get wet and slippery when people enter with wet shoes.

Using control measures like entrance mats to dry shoes, clearing ice from walkways, and having suitable a footwear policy can ensure that slip hazards are less likely to be created.

Remove slip hazards

Some slip hazards can't easily be predicted, like a burst pipe or a spilt drink or a leaky container. But they should be removed (and the source of the leak or spill fixed) as quickly as possible.

If you have a storage area, or an activity, that contains liquids, providing spill kits and training for what to do if a spill occurs can help make sure that any spill hazards get removed before they slip you up.

Highlight slip hazards

Not every slip hazard can be prevented or removed. For example, when you are mopping a floor, it's probably going to be slippery during the activity.

And if you are doing an activity that creates dust or loose fragments, the floor might be slippery until you are done and can clean it up.

In addition to making sure those doing the activity are wearing suitable footwear, you should also highlight the risk to other people so they don't accidentally step onto a slippery surface.

You could use a simple warning sign, or temporary barriers, depending on the risk level.

Download the free slips and trips toolbox talk template as a short refresher on slips and trips for you and your team.

This article was written by Emma at HASpod . Emma has over 10 years experience in health and safety and BSc (Hons) Construction Management. She is NEBOSH qualified and Tech IOSH.

Better health and safety...

We are here to help you and your business put safety in everything .

Recent posts like this...

Your Near Miss Reporting Procedure Needs These 6 Simple Rules

If you are thinking about starting a near-miss reporting system, you need more than a form. A successful near-miss reporting system starts with good design and ends with results. Here are six simple rules that will help you get the most out of your near-miss reporting procedure.

HSE Improvement Notices Vs Prohibition Notices

If the HSE visit your premises or site and find something wrong, they will expect you to put it right. You may get an enforcement notice, an improvement notice or a prohibition notice. But what are the differences between an improvement notice and a prohibition notice?

What The Law Says About Hot Water At Work

No hot water at work? Hand washing is important for cleanliness, at work and home. As an employee, you have legal rights to certain welfare facilities at work. As an employer, if you don't provide it, you could find yourself in a different kind of hot water with the HSE or local authorities.

Spend less time on paperwork. Start with the free plan today.

• Automation & Control Gear
• Cables & Wires
• Enclosures & Server Racks
• Fuses & Circuit Breakers
• HVAC, Fans & Thermal Management
• Relays & Signal Conditioning
• Batteries & Chargers
• Displays & Optoelectronics
• ESD Control, Cleanroom & PCB Prototyping
• Passive Components
• Power Supplies & Transformers
• Raspberry Pi, Arduino, ROCK, STEM Education & Development Tools
• Semiconductors
• Access, Storage & Material Handling
• Adhesives, Sealants & Tapes
• Bearings & Seals
• Engineering Materials & Industrial Hardware
• Fasteners & Fixings
• Mechanical Power Transmission
• Plumbing & Pipeline
• Pneumatics & Hydraulics
• Power Tools, Soldering & Welding
• Computing & Peripherals
• Facilities Cleaning & Maintenance
• Office Supplies
• Personal Protective Equipment & Workwear
• Security & Ironmongery
• Site Safety
• Test & Measurement
• Published 28 May 2024
• Last Modified 28 May 2024

Workplace Trip Hazards and Their Prevention

Trip hazards are a serious workplace safety issue, with too many counted in the UK every year. Learn about different trip hazards and how to avoid them here.

Reviewed by David Carmichael, Solution Engineer (May 2024)

Trip hazards in the workplace are an ongoing serious issue facing businesses and workers. These hazards take many forms and can be difficult to spot and manage. With the right practices and controls in place, though, you can ensure that workers and visitors can move freely and safely around your workplace.

Trip Hazard Examples

So just what is a trip hazard? It is any change in height in someone’s path that could cause them to lose their balance. This can take the form of obstructions or changes in floor elevation. There is not actually a minimum specified HSE trip hazard height, though obstructions taller than 1 inch (25.4 mm) are generally considered trip hazards.

Trip hazard examples in the workplace include:

• Boxes or objects left carelessly in walkways
• Cables or hoses suspended above ground level
• Damaged stairway steps, or ones with inconsistent or insufficient heights
• Open drawers or cabinets
• Uneven ground
• Single steps
• Poor lighting or obstructed sightlines

Some of these may seem benign, and while they can be easily marked or removed, failure to do so leaves the risk of a fall injury and all the associated costs and reputational harm to your business.

Workplace Trip Injuries in the UK

Workplace trip injuries statistics.

The Health and Safety Executive’s 2022/23 statistics illustrate the prevalence of trip hazards in the workplace. Slips, trips, and falls on the same level (that is, not falling from an elevated height) were the most common cause of employee-reported non-fatal workplace injuries, accounting for 179,520 out of the 561,000 total (32%).

Employees in various industries reported high levels of injuries (from all causes, not just trips) in this period. Agriculture, forestry, and fishing came in the highest, followed closely by construction, accommodation/food services, wholesale/retail trade, transportation/storage, and others. This affirms that protection from dangers like trip hazards is vitally important for all workers, regardless of their industry.

Safety Standards for Trip Hazards

Managing trip hazards in the workplace falls within the following safety standards in the UK.

Section 12 of the Workplace (Health, Safety and Welfare) Regulations of 1992 governs employer responsibilities concerning trip hazards. It mandates that workplace flooring and traffic routes be:

• Built appropriately for their purpose
• Free of obstructions, substances, slopes, and holes that could cause slips, trips, or falls
• Not uneven or slippery in a way that could cause slips, trips, or falls
• Built with effective drainage, where necessary

More broadly, the Management of Health and Safety at Work Regulations of 1999 set out employer obligations for assessing the health and safety risks, such as trip hazards, that their operations expose workers and other individuals to.

Finally, slip-resistant footwear used as PPE against trip hazards must meet EN ISO 20345 slip resistance standards.

Costs of Trip Injuries

When a fall injury happens in the workplace due to a trip hazard, there can be staggering costs (as with all workplace injuries). These include both financial costs and human costs.

Financial costs are monetary losses the victim, the business, and even society suffer:

• Lost income
• Stopped or reduced production
• Training replacement workers
• Investigation and litigation

Human costs are more difficult to quantify but can be even more significant, ranging from injury to a business' reputational damage.

HSE statistics indicate that from 2019/20 to 2022/23 , 606,000 workers were injured yearly on average. For the 2021/22 period, injuries cost individuals, businesses, and the government £7.7 billion, with individuals seeing the majority of that. These numbers alone are reason enough to adopt strong practices for preventing trip accidents.

Trip Hazard Prevention

As with all safety hazards, addressing trip hazards in the workplace involves a range of measures: hazard elimination, risk reduction, and training. A detailed risk assessment can help you identify the nature and severity of your trip hazards and the best measures for addressing them.

Eliminating Hazards

Removing hazards completely is always the best approach since it eliminates the possibility of workplace injury due to tripping.

• Lighting : Set up additional or stronger lights if the current ones are noticeably insufficient for spotting objects
• Sightlines : If your equipment’s arrangement on the shop floor makes it difficult to see hazards when rounding corners, then rearrange it into a more comfortable, free-flowing layout
• Stairs : If steps are damaged or have uneven heights, see to their repair or complete replacement

These measures require substantial investment, but they go a long way towards fall prevention by cutting out trip hazards.

Engineering Controls

Engineering controls are methods that prevent workers from contacting hazards, though the hazards do remain. When it comes to trip hazards, engineering controls include:

• Stairways designed with consistent, adequate step heights
• Strict quality standards for floor surfaces and ground grading
• Complete guardrails installed next to knee-high equipment
• Drawers and cabinets that gradually self-close
• Treadplate guards installed over hoses and wires when routing them across walkways is unavoidable. These guards must have slopes and high visibility to prevent them from becoming trip hazards themselves

Administrative Controls

Administrative controls are practices that prevent safety incidents from occurring. These controls include training, written procedures, and signage. Administrative control examples for trip hazards in the workplace include:

• Placing trip hazard signs to warn workers of these dangers
• Installing high-visibility tape on single steps
• Training employees to avoid and even prevent trip hazards, such as by not creating cable trip hazards due to careless routing
• Assessing fall injury incidents to learn how to prevent them in the future
• Designing daily operational practices around avoiding hazards

All these practices will help with preventing trip accidents and improve site safety in general.

Shop for Warning Signs

Personal protective equipment (PPE) is the last line of defence against workplace injury. For fall prevention, slip-resistant footwear is the main PPE control. It helps more so with slip hazards, but in any contact with a trip hazard, maintaining your stance with slip-resistant footwear will always help you avoid a fall injury. As with all PPE, this footwear can only be effective if it is worn properly, matched to the task and environment, and kept free of damage.

The UK safety standard for slip-resistant footwear is EN ISO 20345. It used to have SRA, SRB, and SRC subcategories based on the flooring rated, but the standard’s 2022 update eliminated those. All new safety footwear with the EN ISO 20345 label effectively meets the old SRA rating.

Our range of safety footwear includes anti-slip safety boots that meet EN ISO 20345 while also being rugged and comfortable.

Shop for Safety Boots

Making a Safer Workplace Culture

The best way to avoid workplace injury is to maintain a thoroughly safe environment. This begins with demonstrating that the company leadership values safety, and continues through ongoing employee training, prominent signage explaining hazard severity, and encouraging teams to look out for each other. Workers in a safe workplace culture will diligently prevent trip hazards by instinctively knowing not to place obstacles in walkways, attempt to walk over pallets, or carelessly route hoses and wires.

We can help equip you with the footwear , safety signs , and flooring you need to allow safe movement around your facility.

Related Articles

What constitutes a trip hazard?

Any vertical change of over 1/4 inch or more at any joint or crack is defined as a ‘trip hazard’ by The Americans with Disabilities Act (ADA) of 1990. Trip hazards are a legal liability because the ADA demands strict compliance.

4970 SW 72nd Ave Suite 109, Miami, FL 33155

305.821.4581

305.821.3738

Copyright © Mertz Law Group All Rights Reserved.

Senior Care Avon

Tripping and falling at home can cause severe injuries for seniors, and falling at home is the most common cause of injuries in seniors. Every year more than three million seniors fall and are injured. Even a fall that doesn’t seem serious can cause injuries that will put your senior parent in rehab or impact their mobility. Minimizing the risks of falling in seniors’ homes is crucial.

Senior care is an excellent resource for keeping seniors safe at home. Senior care seniors are less likely to fall at home because they will have help getting home. And a care provider can ensure that there are no hazards or things that could cause seniors to trip and fall. If your senior parent is aging in place, you and they should watch out for these trip hazards:

Sometimes it’s easy to forget that cords can be a considerable tripping hazard for seniors. Seniors may not be able to lift their feet over a cord. They also may not see the cord on the floor. Or, if they are using a cane or walker, the tip of the cane or the wheels of the walker could get caught in the cord and cause them to fall. To get rid of this tripping hazard, choose electronics with long cords and run the cords up the wall or across the wall securely instead of having them lying on the floor.

Pets And Pet Items

Pets are great for seniors, but they can be unpredictable. In their excitement, pets can dart in front of a senior and cause them to trip or fall. They can also leave toys and other items in front of your senior parent’s feet, causing them to trip and fall. Professional dog training can help dogs stay out of your parent’s way as they walk. At the same time, a senior care provider can ensure that toys and other items are safely stowed away and not in your senior loved one’s path.

Area Rugs And Runners

Similarly, area rugs and runner rugs cause thousands of falls among seniors every year. The edges ride up or get caught on a shoe, or the rug slips, and your senior loved one falls. Use heavy-duty carpet tape if you can’t remove all areas and runner rugs from home. In particular, tape all the edges of the rug. So put some tape in the center so the rug will stay put no matter what.

Shoes And Clutter

Shoes and other clutter regularly cause seniors to trip. Make sure that there are shoe racks by the door. But also put small ones near the couches and chairs. Also, by the bed. If your senior loved one wants to take their shoes off, they can. So, they put their shoes securely in a rack where they won’t be in the way.

If you or an aging loved one are considering Senior Care in Avon , IN, please call the caring staff at Home Services Unlimi ed. Serving Greater Indianapolis A ea. all for Immediate Info & Assistance: (317) 471-0760.

https://www.cdc.gov/injury/features/older-adult-falls/index.html

• Recent Posts

• Home Care Differences Between Grooming and Hygiene - April 24, 2023
• 4 Senior Home Care Tips to Get Out of a Food Rut - April 13, 2023
• Elder Care Tips For Managing Senior Stress - March 21, 2023

Get Free Advice

Please Select.. Accident at Work Car Accident Claims Medical Negligence Claims Slip Trip Claims Whiplash Claims Criminal Injury Sexual Abuse Flight Compensation Stress or Bullying Other

Time to call :

Please Select.. Today: 9.am-10am Today: 10.am-11am Today: 11.am-12.pm Today: 12.pm-1.pm Today: 1.pm-2.pm Today: 2.pm-3.pm Today: 3.pm-4.pm Today: 4.pm-5.pm Today: 5.pm-6.pm Today: 6.pm-7.pm Today: 7.pm-8.pm Tomorrow: 8.am-9am Tomorrow: 9.am-10am Tomorrow: 10.am-11am Tomorrow: 11.am-12.pm Tomorrow: 12.pm-1.pm Tomorrow: 1.pm-2.pm Tomorrow: 2.pm-3.pm Tomorrow: 3.pm-4.pm Tomorrow: 4.pm-5.pm Tomorrow: 5.pm-6.pm Tomorrow: 6.pm-7.pm Tomorrow: 7.pm-8.pm

Learn What Is The Legal Height Of A Trip Hazard In The UK

If you have been injured by a trip hazard, you may be able to claim compensation if it happened because another party breached the duty of care which they owed you. In this guide, we discuss this and related questions, such as “What is the legal height of a trip hazard in the UK?”

What Is The Legal Height Of A Trip Hazard UK And When Could I Claim For A Tripping Accident?

By Stephen Kane. Last Updated 19th March 2024. If you have been injured by a tripping hazard because another party breached their duty of care, then you may be eligible to claim compensation. You may be asking “ What is the legal height of a trip hazard in the UK ?” or if such a thing can even be applied to injury claims.

In this guide, we will discuss the eligibility requirements for claiming for injuries caused by a tripping hazard. This includes tripping accidents either at a workplace or in a public space. We’ll also discuss how a tripping hazard may be defined by local authorities that manage a public area, and the duty of care owed to you in certain situations.

Potential compensation payouts and the benefits of claiming with a No Win No Fee solicitor are also covered in our guide. There are many benefits to working with a solicitor on your claim, such as assistance with gathering evidence to strengthen your case. 

If you would like to learn more, read on, or contact our team of expert advisors today by:

• Calling 0161 696 9685
• Using our online contact form .
• Or by using our 24/7 live chat service.

Select A Section

What is the legal height of a trip hazard in the uk.

• Who Could Make A Claim For Injuries Caused By A Tripping Hazard?

What Is The Legal Height Of A Trip Hazard UK? – Council Responsibility For Pavements

How long do you have to claim against a council for a tripping accident, compensation payouts for injuries caused by a trip hazard, what evidence could help me receive slip, trip or fall compensation, make a no win no fee claim for injuries caused by a trip hazard in the uk.

• More Information On The Pavement Trip Hazard Height

In law, there is no legal height defined for a pavement trip hazard. The criteria for a pavement defect that is actionable will vary between local authorities. However, many local authorities won’t consider a pavement defect actionable unless it is at least 1-inch (25mm, 2.5cm) high or deep. We’ll explain how to demonstrate the height of a trip hazard later on.

You can’t claim just because you tripped over the hazard. You must be able to demonstrate that it caused you to be injured. For this reason, you should attend A&E or book an appointment with your GP as soon as possible after the accident occurred. Not only will this provide a basis for your claim, but it will also ensure that you get the medical attention needed for your injuries. 

While the hazard height is a crucial aspect, you would also need to demonstrate that the hazard was created by third-party negligence. This could involve, for instance, evidence showing that the local council did not monitor the public park correctly.

For free claims advice on how to proceed with your pavement trip claim , please get in touch with our specialists today .

Who Could Make A Claim For Injuries Caused By A Tripping Hazard? 

It’s important to note that you cannot claim for just identifying a tripping hazard, and not all accidents caused by a trip hazard will result in a successful compensation claim. This is because your case must meet certain criteria in order to be valid, meaning you must be able to prove that:

• You were owed a duty of care
• This duty was breached
• You were injured as a result of this breach 

This also determines who you make your claim against. For example, for tripping hazards in the workplace, such as trailing wires and cluttered walkways, you would claim against your employer. This is because they owe you a duty of care and must take all reasonably practicable steps to keep you safe in the workplace, according to the Health and Safety at Work etc. Act 1974 (HASAWA).

However, if you are in a public space and trip over a pavement or dislodged paving stone, then your claim may be made against the local council. This is because they are the controller of that space, and as such, owe you a duty of care under the Occupiers’ Liability Act 1957 (OLA).

If another party breaches their duty of care towards you, and you are injured as a result, then you may be able to claim personal injury compensation. Contact our team for more information.

If a pavement is in a public area which the local council is responsible for, then that council is responsible for the maintenance of the pavement.

Section 41 of the Highways Act 1980 (HiA 1980) provides that the highway authority is under a duty to maintain the highway. It is the duty of the highway authority to maintain the road in such a state of repair as to be passable in safety at all seasons of the year.

Under their duty of care, councils should maintain pavements they’re responsible for by carrying out work such as replacing broken or missing slabs and removing weeds when required. Also, to help fulfil this duty, councils will usually carry out regular inspections every year of roads and pavements to identify which ones need the most maintenance. Just how frequent these pavement inspections are can vary from council to council.

That said, you may be wondering, ‘What is the legal height of a trip hazard in the UK when inspecting pavements?’. As mentioned before, there is no specific legal height that defines a pavement trip hazard.

Councils may also respond to public reports about issues with local pavements. An online Government page allows residents in England and Wales to report problems with a pavement directly to their council.

For more advice on whether you may have grounds to claim against a council for breaching their responsibilities following a pavement trip accident, contact our advisors for free today.

In accordance with the Limitation Act 1980 , there is a three-year time limit for starting a personal injury claim against a council. This usually starts from the date your injury occurred. However, the time limit can work differently under certain circumstances.

If the injured party lacks the mental capacity to start their own claim, then the time limit will be frozen indefinitely. While the time limit is frozen, a litigation friend could start a claim against the council on behalf of the person who has been harmed. If, however, the party later regains this mental capacity and a claim has not been made, then they will have three years to start a claim from the day of recovery.

If a child has been injured, then the time limit for starting a claim against the council will be put on hold until their 18th birthday. A litigation friend could start a claim on the child’s behalf before they reach this age. Otherwise, the child will have three years to start their own claim from the date of their 18th birthday.

For more advice on the requirements for claiming for a trip hazard, the meaning of the term or other related matters, get in touch with our advisors for free today.

If your employer were to breach their duty of care you could be injured due to a trip hazard, meaning you could be owed compensation.

Following a successful personal injury claim , your compensation settlement could consist of general and special damages. General damages compensate you for the pain and suffering you have endured due to being injured by a workplace trip hazard. To help give you a clearer idea of how much you could receive in general damages for your injury, we have provided the following table. The amounts listed have been taken from the 16 th edition of the Judicial College Guidelines (JCG). The JCG is a document used by various legal professionals to help them value claims, as it lists compensation brackets for different injuries.

Compensation is awarded on a case-by-case basis, so please only use this table as a guide. Also note that the first entry in this table is an estimated figure that is not based on the JCG.

Special damages compensate you for the financial losses you have suffered due to your injury. Some of the financial closes you could claim under special damages include:

• Medical costs.
• Travel expenses.
• Loss of earnings .
• Care costs.

You will need to provide evidence of these losses in order to receive compensation for them. Payslips, bank statements, and invoices could all be used as evidence in your claim.

Contact our advisors today to discuss your particular claim. Our advisors could also help answer questions such as, ‘what is a tripping hazard, and how could my employer be liable if I am injured because of one?’

Slip, trip and fall claims revolve around proving that your injury was the result of third-party negligence. To do this, you will need sufficient evidence. You need to be able to create a causal link between the council’s negligence, for instance, and your injury. Evidence that you could use includes:

• Photographs of your injury and the pavement defect. Photographs of the scene are particularly important as your potential claim revolves around showing that the pavement defect goes above the legal height for a trip hazard.
• Contact details of any witnesses. As part of the claims process, your solicitor can contact them to take statements.
• CCTV footage of the incident. This can give a clearer idea of how the accident occurred.
• A log of the accident report if you have reported the incident. This can help confirm the time, location and date that it took place.
• Doctor’s notes. A medical professional will assess your injury as part of receiving medical treatment. Their notes can be used to show the extent of the injury. Other medical evidence you could use includes copies of any medical scans.

If you have other queries about trip and fall claims, please contact our team of advisors for a free consultation using the details above.

If you’ve been injured by tripping on a hazard that should not have been there or should have been signposted, you may be eligible to claim compensation. A lawyer from our panel could assist you in making a personal injury claim on a No Win No Fee basis under a Conditional Fee Agreement (CFA). Under this arrangement, you would not have to pay them any fees for their work upfront or during the course of your claim.

Furthermore, if your claim does not end in compensation, you would not have to pay them for their work.

If your claim is successful, your lawyer will deduct a small percentage from your compensation. This is known as a success fee, and the percentage one can be is legally capped.

To see if you could be eligible to work with a lawyer from our panel, you can contact our advisors. They can also help answer any questions you may have about personal injury claims being made due to trip hazards.

You can reach an advisor today by:

• Using our live chat.
• Filling out our contact us page.

More Information On The Legal Height Of a Trip Hazard

This is the final section of our guide, so we have added some links to resources that may come in handy. If you would like any more information about claiming, please contact our team on the number above.

• Broken Bones – An NHS article that gives advice to help you work out if you have broken a bone.
• The Royal Society For The Prevention Of Accidents – ROSPA are a UK charity that is working towards a world free of accidents.
• Local Authority Complaints – Information from the Local Government and Social Care ombudsman on how to raise formal complaints.
• To show what other types of accidents we can help with, please take a look at some of the guides below.
• Local Authority Claims  – For more information about making a claim against a local authority or council, please read our guide. 
• Slip, Trip or Fall Claims  – If you’d like more general advice around slip, trip and fall claims, then this guide may be helpful to you.
• Doormat Slip, Trip and Fall Claims  – It’s not just pavement defects that can cause injuries through slips and trips. Read our guide for information on claiming for an accident caused by a doormat .
• Most Common Public Place Accidents – In this guide you can find out about the different types of public place accidents if you find that this page doesn’t match what happened to you.

Thank you for reading our guide on the legal height of a trip hazard. If you would like to learn more about the trip hazard height or have further questions, please contact us for free legal advice using the details above.

Example sentences trip hazard

Definition of 'hazard' hazard.

Definition of 'trip' trip

COBUILD Collocations trip hazard

Browse alphabetically trip hazard

• trip a switch
• trip computer
• trip hazard
• trip planner
• All ENGLISH words that begin with 'T'

Quick word challenge

Quiz Review

Score: 0 / 5

Wordle Helper

Scrabble Tools

Dzerzhinsky in Moscow Oblast Destination Guide Russia

• You are here:

Dzerzhinsky in Moscow Oblast, Russia

Safety Score: 4,4 of 5.0 based on data from 9 authorites. Meaning please reconsider your need to travel to Russia.

Travel warnings are updated daily. Source: Travel Warning Russia . Last Update: 2024-06-03 08:00:28

Explore Dzerzhinsky

Dzerzhinsky in Moscow Oblast is located in Russia about 13 mi (or 21 km) south-east of Moscow, the country's capital.

Local time in Dzerzhinsky is now 02:29 AM (Tuesday). The local timezone is named Europe / Moscow with an UTC offset of 3 hours. We know of 7 airports in the wider vicinity of Dzerzhinsky, of which two are larger airports. The closest airport in Russia is Bykovo Airport in a distance of 8 mi (or 13 km), East. Besides the airports, there are other travel options available (check left side).

There are several Unesco world heritage sites nearby. The closest heritage site in Russia is Church of the Ascension, Kolomenskoye in a distance of 7 mi (or 12 km), West. If you need a place to sleep, we compiled a list of available hotels close to the map centre further down the page.

Depending on your travel schedule, you might want to pay a visit to some of the following locations: Orekhovo-Borisovo Yuzhnoye, Moscow, Cheremushki, Ramenskoye and Vostochnoe Degunino. To further explore this place, just scroll down and browse the available info.

Local weather forecast

Todays local weather conditions & forecast: 25°c / 77 °f.

Tuesday, 4th of June 2024

22°C (72 °F) 17°C (63 °F) Light rain, moderate breeze, broken clouds.

Wednesday, 5th of June 2024

25°C (77 °F) 19°C (66 °F) Scattered clouds, gentle breeze.

Thursday, 6th of June 2024

26°C (80 °F) 21°C (69 °F) Light rain, gentle breeze, scattered clouds.

Hotels and Places to Stay

Master Hotel Kotelniky

Address 2,8 mi Novoryazanskoe sh 5a 140053 Kotelniki Russia

Mini-Hotel Komfort

Address 2,4 mi 2-y Pokrovskiy proezd 12 140055 Kotel'niki Russia

Checkout: 12:00 - Checkin: 12:00 Reception Weekday: 0:00 - 24:00 Weekend: 0:00 - 24:00

Videos from this area

These are videos related to the place based on their proximity to this place.

Attractions and noteworthy things

Distances are based on the centre of the city/town and sightseeing location. This list contains brief abstracts about monuments, holiday activities, national parcs, museums, organisations and more from the area as well as interesting facts about the region itself. Where available, you'll find the corresponding homepage. Otherwise the related wikipedia article.

Ugresha Monastery

Nikolo-Ugreshsky Monastery is a walled stauropegic Russian Orthodox monastery of St. Nicholas the Miracle-Worker located in a suburb of Moscow formerly known as Ugreshi and now called Dzerzhinsky. It is the town's main landmark and is featured on the . The monastery is known to have existed as early as 1521, when the Tatar horde of Mehmed I Giray reduced Ugreshi to ashes. The old katholikon of St. Nicholas (later destroyed by the Soviets) was built in the 16th century.

Located at 55.6217, 37.84 (Lat. / Lng.), about 1 miles away. Wikipedia Article Russian Orthodox monasteries, Buildings and structures in Moscow Oblast, Christian monasteries established in the 14th century, Museums in Moscow Oblast, Religious museums in Russia, Biographical museums in Russia, Decorative arts museums in Russia

These are some bigger and more relevant cities in the wider vivinity of Dzerzhinsky.

Nationwide popular locations

These are the most popular locations in Russia on Tripmondo.

Smaller cities in the vicinity

These are smaller but yet relevant locations related to this place.

View prices for your travel dates

• Excellent 18
• Very Good 9
• All languages ( 43 )
• Russian ( 37 )
• English ( 4 )
• German ( 1 )
• Italian ( 1 )

" DIR: West; bigger nice evening sun but louder due to main street DIR:East; Quiter, very bright in the morning if sun rises "

Own or manage this property? Claim your listing for free to respond to reviews, update your profile and much more.

APELSIN HOTEL

ELECTROSTAL HISTORY AND ART MUSEUM: All You Need to Know BEFORE You Go (with Photos)