how to jumpstart 2009 dodge journey

How to Jump Start a Dodge Journey: A Complete Guide to Reviving Your Car

There may come a time when your Dodge Journey experiences a dead battery and you need to jump start it. Knowing how to jump start your vehicle can save you time and money, and get you back on the road quickly. In this guide, we’ll walk you through the step-by-step process of jump-starting a Dodge Journey.

What You’ll Need:

• A set of jumper cables
• Another vehicle with a functioning battery
• Safety gloves and goggles (optional but recommended)

Step 1: Find a Good Samaritan

If your Dodge Journey’s battery has died, you’ll need another vehicle with a functioning battery to jump-start it. Ask a friend, family member, or a kind stranger nearby who is willing to help you out.

Step 2: Position the Vehicles

Park the vehicle with the functioning battery close to your Dodge Journey, allowing enough space between the hood of both vehicles to easily access the batteries. Both vehicles should be turned off, with their parking brakes engaged.

Step 3: Identify the Battery Terminals

Open the hood of both vehicles and locate the battery terminals. They should be labeled as positive (+) and negative (-). The positive terminal is usually red, while the negative terminal is often black.

Step 4: Connect the Jumper Cables

Now it’s time to connect the jumper cables:

Step 5: Start the Vehicles

Once the jumper cables are securely connected, start the vehicle with the functioning battery and let it run for a few minutes. This will allow the dead battery to gain some charge.

Step 6: Start the Dead Vehicle

Now, try starting your Dodge Journey. If the battery was the underlying issue, it should start up. If it doesn’t, double-check the connections and let the vehicles sit for a few more minutes before attempting again.

Step 7: Disconnect the Jumper Cables

Once your Dodge Journey is running, carefully disconnect the jumper cables in the reverse order of how they were connected:

• Disconnect the negative (-) cable from the engine block of your Dodge Journey.
• Disconnect the negative (-) cable from the good battery.
• Disconnect the positive (+) cable from the good battery.
• Disconnect the positive (+) cable from the dead battery (Dodge Journey).

Final Thoughts

Jump-starting a Dodge Journey is a simple process as long as you follow the proper steps and take necessary precautions. Remember to always wear safety gloves and goggles when working with batteries. If your Dodge Journey continues to experience battery issues, it’s recommended to have the battery and charging system checked by a qualified mechanic.

Hopefully, this guide has helped you become more confident in jump-starting your Dodge Journey in case of a dead battery. Stay safe on the road!

Frequently Asked Questions On How To Jump Start A Dodge Journey: A Complete Guide To Reviving Your Car

How do you jump start a dodge journey.

To jump start a Dodge Journey, you’ll need a set of jumper cables and another vehicle with a fully charged battery. Connect the positive terminals, negative terminals, then start the Dodge Journey’s engine.

Can I Use A Portable Jump Starter To Jump Start My Dodge Journey?

Yes, a portable jump starter is a great alternative to using another vehicle. Connect the jump starter to the Dodge Journey’s battery, then start the engine.

What Should I Do If My Dodge Journey Doesn’t Start After A Jump?

If your Dodge Journey doesn’t start after a jump, double-check the connections, let the battery charge for a few minutes, and try again. If it still doesn’t start, you may need to replace the battery.

How Often Should I Jump Start My Dodge Journey?

Ideally, you should only jump start your Dodge Journey when the battery is dead. However, if you frequently jump start it, it may be time to have the battery and electrical system checked by a professional.

Related posts:

• How to Reset Nissan Rogue Radio: Easy Guide for Reviving Your Sound System
• Can a Subaru Jump Start Another Car: The Complete Guide
• How to Easily Reset Dodge Journey Oil Change Light: Complete Guide
• How to Easily Program Key Fob for Push Start Dodge Journey: Step-by-Step Guide

Leave a Comment Cancel reply

Save my name, email, and website in this browser for the next time I comment.

How to Jump a Dodge Journey

If your Dodge Journey’s battery is out of juice, a jump start may be the only way to get it up and running. However, if you’ve got no experience of jump-starting a car battery, you may not know how to start. This process isn’t too tricky, but needs to be carried out with care and precision to avoid any mistakes or risks. This guide will cover exactly how to jump a Dodge Journey, step by step. We’ll also cover what to do when your Journey is up and running again.

How to Jump Start a Journey: Step 1 – Preparation

First, before popping the hood or hooking up the cables, there are a few preparatory steps to follow. Prep really matters when it comes to jump-starting a Dodge Journey (or any other car) as it reduces the risk of any accidents or unwanted side effects from the process.

First, you’ll need to make sure you’ve got a good quality set of jumper cables to use. You’ll also need a secondary vehicle (a “donor” vehicle) with a fully-functional battery. Alternatively, you can use a portable battery booster to jump your Journey if another vehicle isn’t available. Safety gloves and glasses are also recommended.

Make sure the parking brake is engaged and shift your car into “Park,” with the ignition on “Lock.” Additionally, switch off all electrical systems, like the heater, the radio, and any in-car entertainment screens or GPS devices.

You’ll also want to make sure that, if you’re using a secondary vehicle to jump your Journey, it’s parked close by. Ideally, the two vehicles should be parked facing one another, so you can easily pop the hoods on both and connect the cables without running out of room.

Step 2. Pop the Hood

Find the hood release lever, which is typically below and to the left of the steering wheel, and pull it. Then step out of the vehicle, release the safety catch, and lift the hood. Use the hood prop to hold the hood in place while you work. Do the same for the secondary vehicle.

Step 3. Locate the Terminals

Next, you’ll want to locate the car battery and the positive (+) and negative (-) terminals, where you’ll be connecting the jumper cables. Make sure to put on your safety glasses and gloves before this stage, if you have them.

The positive terminal is red and marked by a + sign. Find it and remove its cover. If you have any trouble with this, look for the little locking tab. Push on that, then pull the cover upward, and it should come away freely.

You’ll also need a negative ground. For this, you can use any unpainted metal surface around the engine. Find a spot that is easy to access and keep it in mind when attaching the negative cables in the next step.

This is also a good time to inspect the batteries in both vehicles. Look for any signs of damage, such as cracks, acid leaks, corrosion, or even swelling of the battery itself. If the battery looks damaged or is leaking, it’s best to avoid attempting a jump start and call a mechanic instead.

Step 4. Connect the Cables

This is the most important step, and arguably the trickiest, too. You’ll need to hook up the jumper cables to the two car batteries, and there’s a very precise order to follow. If you do anything out of order or connect to the wrong locations, you could endanger yourself or damage the vehicles.

To begin, take the red (positive) jumper cable and connect one of the clamps to the positive terminal on the Dodge Journey. After that, connect the other end to the positive terminal on your secondary vehicle.

Take the black (negative) cable and connect one clamp to the negative terminal on the secondary vehicle, or your portable booster. Continue by attaching the other end to your negative ground (an unpainted metal section) on the Journey.

Step 5. Turn On the Secondary Vehicle

Turn on the engine of the secondary vehicle. Let it run for a few minutes to transfer energy from the donor battery to the dead Dodge Journey battery. You can also rev the engine in the secondary vehicle to help speed up the process.

After a few minutes, try starting the Dodge Journey. If it starts, disconnect the cables in the following order:

• The negative ground from the Dodge Journey.
• The negative cable from the donor vehicle.
• The positive clamp on the donor vehicle.
• The positive clamp from the Dodge Journey.

If the Dodge Journey still won’t turn over, leave it for another few minutes and try again. It may just need some more time. If it still won’t start, even after several attempts, there may be an underlying issue with either the battery or the alternator, and you might have to call a mechanic to fix it.

Step 6. Drive the Dodge Journey

Once your Dodge Journey fires up, it’s important to drive it around for a little while. This helps to recharge the battery. Aim to drive for at least 10 minutes, if not longer. The longer you can keep your car running, the more the battery will charge. Also, try to avoid using any electrical systems during this time, like the radio, as this will put extra stress on the battery and use power unnecessarily.

You may now want to visit a dealership or local garage to get your Dodge Journey looked at. Expert technicians can diagnose unexplained battery issues. However, you might already be able to figure out what went wrong on your own. For example, if you left the headlights on for a while, that’s most likely why the battery drained and needed to be jumped.

Why do you need a jump-start?

There are multiple potential reasons why a car might need a jump-start, including a dying battery, issues with the charging system, or a faulty alternator. In many cases, it’s because the car hasn’t been driven in a long time, causing the battery to gradually lose charge.

Jump Your Journey in a Few Easy Steps

As you can see, jumping a Dodge Journey is pretty similar to jumping any other car. It’s a relatively simple process, once you know how, but it still requires caution. Make sure to wear the proper safety equipment, take your time, and follow the correct clamping order to avoid any problems along the way.

Related posts:

No related posts.

Leave a Comment Cancel reply

Dodge Journey (2009) manual

manual Dodge Journey (2009)

$ISZTMFS--$ 

.

User manual

Use and Care Manual

Safety instructions

View the manual for the Dodge Journey (2009) here, for free. This manual comes under the category cars and has been rated by 47 people with an average of a 9. This manual is available in the following languages: English. Do you have a question about the Dodge Journey (2009) or do you need help?  Ask your question here

• INTRODUCTION
• HOW TO USE THIS MANUAL
• WARNINGS AND CAUTIONS
• VEHICLE IDENTIFICATION NUMBER
• VEHICLE MODIFICATIONS/ALTERATIONS
• Wireless Ignition Node (WIN)
• Fob With Integrated Key
• Tip Start Feature
• Ignition Key Removal
• Key-In-Ignition Reminder
• Replacement Keys
• Customer Key Programming
• General Information
• Rearming of the System
• To Arm the System
• To Disarm the System
• ILLUMINATED ENTRY SYSTEM
• To Unlock the Doors and Liftgate
• To Lock the Doors and Liftgate
• Using the Panic Alarm
• Express Down Window Feature
• Programming Additional Transmitters
• Transmitter Battery Service
• How To Use Remote Start
• Manual Door Locks
• Power Door Locks
• Child Protection Door Lock System (Rear Doors)
• Power windows
• Wind Buffeting
• Lap/Shoulder Belts
• Lap/Shoulder Belt Untwisting Procedure
• Seat Belt Pretensioners
• Enhanced Seat Belt Reminder System (BeltAlert)
• Automatic Locking Mode
• Seat Belts and Pregnant Women
• Seat Belt Extender
• Driver and Front Passenger Supplemental Restraint System (SRS) - Airbag
• Event Data Recorder (EDR)
• Child Restraint
• ENGINE BREAK-IN RECOMMENDATIONS
• Transporting Passengers
• Lock Your Vehicle
• Exhaust Gas
• Safety Checks You Should Make Inside The Vehicle
• Periodic Safety Checks You Should Make Outside The Vehicle
• Inside Day/Night Mirror
• Automatic Dimming Inside Mirror - If Equipped
• Outside Mirrors
• Outside Mirrors Folding Feature - If Equipped
• Power Remote Control Mirrors
• Heated Remote Control Mirrors - If Equipped
• Illuminated Vanity Mirrors - If Equipped
• PARKVIEW REAR BACKUP CAMERA - IF EQUIPPED
• Phone Call Features
• UConnect System Features
• Advanced Phone Connectivity
• Things You Should Know About Your UConnect System
• Voice Recognition System (VR) Operation
• Voice Training
• Manual Front Seat Adjustments
• Power Seat - If Equipped
• Head Restraints
• Heated Seats - If Equipped
• 60/40 Split Second-Row Passenger Seats
• 50/50 Split Third-Row Passenger Seats with Fold-Flat Feature - Seven Passenger Models
• TO OPEN AND CLOSE THE HOOD
• Exterior and Interior Lighting Control
• Headlights and Parking Lights
• Automatic Headlights - If Equipped
• Headlights with Wipers (Available with Auto Headlights Only)
• Headlight Time Delay - If Equipped
• Daytime Running Lights (DRL) - If Equipped
• Lights-On Reminder
• Fog Lights - If Equipped
• Turn Signals
• Highbeam/Lowbeam Select Switch
• Flash to Pass
• Interior Lights
• Intermittent Wiper System
• Mist Feature
• Windshield Washers
• Adding Washer Fluid
• TILT/TELESCOPING STEERING COLUMN - IF EQUIPPED
• Electronic Speed Control Operation
• To Activate
• To Set At A Desired Speed
• To Deactivate
• To Resume Speed
• To Vary the Speed Setting
• To Accelerate For Passing
• Courtesy/Reading Lights
• Sunglasses Storage
• Interior Observation Mirror
• Power Sunroof Switch - If Equipped
• Programming HomeLink
• Gate Operator/Canadian Programming
• Using HomeLink
• Reprogramming A Single HomeLink Button
• Troubleshooting Tips
• Opening Sunroof - Manually
• Opening Sunroof - Express
• Closing Sunroof - Manually
• Closing Sunroof - Express
• Pinch Protect Feature
• Pinch Protect Override
• Venting Sunroof - Express
• Sunshade Operation
• Sunroof Maintenance
• Ignition Off Operation
• Sunroof Fully Closed
• Electrical Outlet Use With Engine Off
• POWER INVERTER - If EQUIPPED
• BOTTLE HOLDERS
• Beverage Cooler/Storage Compartment - If Equipped
• Instrument Panel Storage Compartment - If Equipped
• Center Console Storage
• Flip n Stow Front Passenger Seat Storage - If Equipped
• Second-Row Passenger Seat Temporary Storage Bin
• Second-Row Map Pocket and Grocery Retainers - If Equipped
• In-Floor Storage Bin with Removable Liner
• Rechargeable Flashlight - If Equipped
• Cargo Management System
• Rear Window Wiper/Washer - If Equipped
• Rear Window Defroster - If Equipped
• ROOF LUGGAGE RACK - IF EQUIPPED
• INSTRUMENT PANEL FEATURES
• INSTRUMENT CLUSTER
• INSTRUMENT CLUSTER DESCRIPTIONS
• Electronic Vehicle Information Center (EVIC) Displays
• Oil Change Required
• Trip Functions
• Compass Display
• Personal Settings (Customer Programmable Features)
• Radio Broadcast Signals
• Two Types of Signals
• Electrical Disturbance
• AM Reception
• FM Reception
• Operating Instructions - Satellite Radio (If Equipped)
• Operating Instructions - Voice Recognition System (VR) (If Equipped)
• Operating Instructions - Hands-Free Communication (UConnect) (If Equipped)
• Clock Setting Procedure
• Operating Instructions - Radio Mode
• Operation Instructions - (DISC MODE for CD and MP3/WMA Audio Play, DVD-VIDEO)
• Notes On Playing MP3/WMA Files
• LIST Button (DISC Mode for MP3/WMA Play)
• INFO Button (DISC Mode for MP3/WMA Play)
• Operation Instructions - CD MODE for CD and MP3 Audio Play
• Notes On Playing MP3 Files
• LIST Button (CD Mode for MP3 Play)
• INFO Button (CD Mode for MP3 Play)
• Operating Instructions - Satellite Radio
• System Activation
• Electronic Serial Number/Sirius Identification Number (ESN/SID)
• Selecting Satellite Mode
• Satellite Antenna
• Reception Quality
• Operating Instructions - Satellite Mode
• Operating Instructions - Hands-Free Phone (If Equipped)
• Operating Instructions - Video Entertainment System (VES) (If Equipped)
• SIRIUS BACKSEAT TV - IF EQUIPPED
• VIDEO ENTERTAINMENT SYSTEM (VES) - IF EQUIPPED
• Connecting The iPod Device
• Controlling The iPod Using Radio Buttons
• List or Browse Mode
• Right-Hand Switch Functions
• Left-Hand Switch Functions for Radio Operation
• Left-Hand Switch Functions for Media (i.e., CD) Operation
• CD/DVD MAINTENANCE
• RADIO OPERATION AND CELLULAR PHONES
• General Climate Control Functions - All Systems
• Single-Zone Manual Air Conditioning and Heating System
• Two- and Three-Zone Manual Air Conditioning and Heating Systems - If Equipped
• Two- and Three-Zone Automatic Temperature Control (ATC) Systems - If Equipped
• Operating Tips
• Automatic Transaxle
• Normal Starting (Tip Start)
• Extremely Cold Weather (Below -20 degrees F or -29 degrees C)
• If Engine Fails To Start
• After Starting
• ENGINE BLOCK HEATER - IF EQUIPPED
• Brake/Transaxle Interlock System
• Automatic Transaxle Ignition Interlock System
• 4-Speed or 6-Speed (AutoStick) Automatic Transaxle
• AutoStick Operation
• AutoStick General Information
• ALL WHEEL DRIVE (AWD) - IF EQUIPPED
• ACCELERATION
• Flowing/Rising Water
• PARKING BRAKE
• Anti-Lock Brake System (ABS)
• Brake Assist System (BAS)
• Traction Control System (TCS)
• Electronic Roll Mitigation (ERM)
• Electronic Stability Program (ESP)
• ESP/BAS Warning Light and ESP/TCS Indicator Light
• Trailer Sway Control (TSC)
• POWER STEERING
• TIRE MARKINGS
• TIRE LOADING AND TIRE PRESSURE
• Tire Pressure
• TIRE CHAINS
• Base System - If Equipped
• Premium System - If Equipped
• E-85 GENERAL INFORMATION
• ETHANOL FUEL (E-85)
• FUEL REQUIREMENTS
• SELECTION OF ENGINE OIL FOR FLEXIBLE FUEL VEHICLES (E-85) AND GASOLINE VEHICLES
• CRUISING RANGE
• REPLACEMENT PARTS
• MAINTENANCE
• 2.4L and 2.7L Engines
• 3.5L Engine
• Reformulated Gasoline
• Gasoline/Oxygenate Blends
• MMT In Gasoline
• Materials Added to Fuel
• Fuel System Cautions
• Carbon Monoxide Warnings
• Fuel Filler Cap (Gas Cap)
• Loose Fuel Filler Cap Message
• Vehicle Certification Label
• Gross Vehicle Weight Rating (GVWR)
• Gross Axle Weight Rating (GAWR)
• Overloading
• Common Towing Definitions
• Trailer Hitch Classification
• Trailer Towing Weights (Maximum Trailer Weight Ratings)
• Trailer and Tongue Weight
• Towing Requirements
• Towing Tips
• TOWING THIS VEHICLE BEHIND ANOTHER VEHICLE (Flat Towing With All Four Wheels On The Ground)
• HAZARD WARNING FLASHER
• Engine Oil Overheating - 2.4L Gas and 2.0L Diesel Engines Only (If Equipped)
• Jack Location
• Spare Tire Location
• Preparations For Jacking
• Spare Tire Removal
• Spare Tire Stowage
• Jacking Instructions
• JUMP-STARTING PROCEDURES
• FREEING A STUCK VEHICLE
• Without The Ignition Key
• Towing This Vehicle Behind Another Vehicle (Flat Towing With The Key In The Ignition And All Four Wheels On The Ground)
• Towing This Vehicle Behind Another Vehicle With A Tow Dolly
• 2.4L ENGINE COMPARTMENT
• 2.7L ENGINE COMPARTMENT
• 3.5L ENGINE COMPARTMENT
• EMISSIONS INSPECTION AND MAINTENANCE PROGRAMS
• AUTHORIZED DEALER SERVICE
• Engine Oil Filter
• Drive Belts - Check Condition and Tension
• Spark Plugs
• Engine Air Cleaner Filter
• Catalytic Converter
• Maintenance-Free Battery
• Air Conditioner Maintenance
• A/C Air Filter - If Equipped
• Power Steering - Fluid Check
• Front Suspension Ball Joints
• Steering Linkage
• Body Lubrication
• Wiper Blades
• Windshield Washers/Rear Window Washer
• Exhaust System
• Cooling System
• Hoses and Vacuum/Vapor Harnesses
• Fuel System
• Brake System
• Front and Rear Wheel Bearings
• Appearance Care and Protection from Corrosion
• Cleaning The Cupholders
• FUSES (TOTALLY INTEGRATED POWER MODULE)
• VEHICLE STORAGE
• REPLACEMENT BULBS
• Low Beam Headlight, High Beam Headlight, Front Turn Signal/Park Light, Side Marker Light
• Front Fog Light
• Tail/Stop Light, Rear Turn Signal Light, Tail Light, Backup Light
• License Plate Light
• FLUIDS AND CAPACITIES
• EMISSIONS CONTROL SYSTEM MAINTENANCE
• Required Maintenance Intervals
• Prepare For The Appointment
• Prepare A List
• Be Reasonable With Requests
• Chrysler LLC Customer Center
• Chrysler Canada Inc. Customer Center
• In Mexico contact
• Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY)
• Service Contract
• WARRANTY INFORMATION (U.S. Vehicles Only)
• MOPAR PARTS
• In The 50 United States And Washington, D.C
• PUBLICATION ORDER FORMS
• Traction Grades
• Temperature Grades

Do you have a question about the Dodge and is the answer not in the manual?

• Receive updates on solutions
• Get answers to your question

Question and answer

Where is the map censor on a 2009 jurny

Handbrake warning light

The Dodge Journey is a midsize crossover SUV that was first introduced in 2009. It is equipped with a 2.4L four-cylinder engine, producing a decent amount of power and fuel efficiency. The 2009 Dodge Journey comes with front-wheel drive, although all-wheel drive is available as an option. The interior of the Dodge Journey provides ample seating space, comfortably accommodating up to seven passengers. It features a fold-flat second- and third-row seat design, allowing for versatile cargo space. The Journey offers a range of standard safety features, including antilock brakes, stability control, and numerous airbags. In terms of technology and convenience, the 2009 Dodge Journey offers options such as a rear-seat DVD entertainment system, satellite radio, and a touchscreen navigation system. It also includes storage bins located in the floor, perfect for keeping your belongings hidden and secure. Although the 2009 Dodge Journey may not have the most luxurious interior or the highest performance capabilities in its class, it offers a reliable and comfortable driving experience. With its spacious interior, range of available features, and competitive fuel efficiency, the Dodge Journey is a practical choice for families or individuals needing a versatile crossover SUV.

Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Dodge Journey (2009) below.

How do I convert miles into kilometres?

1 mile equals 1.609344 kilometers and 1 kilometer equals 0.62137119 miles.

Where can I find the VIN number of my Dodge?

The location of the VIN number of the car differs per brand and type of car. The code may be stamped on the frame of the car or mounted on a plate. It is best to consult the manual of the Dodge Journey (2009)for the exact location of the VIN number.

What is a VIN number?

The VIN number of a car is an identification number unique to each car. The abbreviation VIN therefore stands for Vehicle Identification Number.

When does my Dodge need maintenance?

Regular maintenance is necessary for every car. How often the car needs maintenance and what exactly needs to be done can be found in the maintenance instructions. For major periodic service, this should generally be done every 2 years or after 30,000 kilometres.

When should I change the brake fluid of my Dodge?

It is recommended to change the brake fluid every two years.

What is the difference between E10 and E5 petrol?

E10 petrol consists of up to ten per cent ethanol while E5 petrol will contain less than five per cent ethanol. As a result, the percentage of E10 petrol is lower than that of E5 petrol, making it less bad for the environment.

One or more doors won't open from the inside. Now what?

The lock is most likely set to the child safety lock so it cannot be opened from the inside. How to unset the child safety lock differs per brand and type.

My car radio does not turn on, now what?

If your car radio does not turn on, it will not receive any power. Check that the red wire is connected to the contact power supply and the yellow wire to the constant power supply.

How do I check the tire pressure in my Dodge Journey (2009)?

To check the tire pressure, locate the tire pressure monitoring system button on your dashboard. Press it to display the individual tire pressures on your instrument cluster screen.

How do I change a flat tire on my Dodge Journey (2009)?

Start by locating the spare tire, jack, and lug wrench in the trunk. Position the jack underneath the designated lift points, then raise the vehicle until the flat tire is off the ground. Use the lug wrench to loosen and remove the lug nuts, then replace the flat tire with the spare tire and tighten the lug nuts.

What is the recommended oil type for my Dodge Journey (2009)?

The recommended oil type for your Dodge Journey (2009) is 5W-20. It is important to use an oil that meets the specifications outlined in the owner's manual to ensure optimal performance and engine longevity.

How do I pair my phone with the Bluetooth system in my Dodge Journey (2009)?

To pair your phone with the Bluetooth system, ensure that Bluetooth is enabled on your phone. On the infotainment screen, navigate to the Bluetooth settings menu. Select "Pair Device" or a similar option, then follow the on-screen instructions to complete the pairing process.

How do I replace a burnt-out headlight on my Dodge Journey (2009)?

Open the hood and locate the headlight assembly on the front of the vehicle. Remove the retaining clips or screws securing the assembly, then carefully disconnect the wiring harness from the back of the headlight bulb. Replace the burnt-out bulb with a new one of the same type, reconnect the wiring harness, and secure the headlight assembly back in place.

Is the manual of the Dodge Journey (2009) available in English?

Yes, the manual of the Dodge Journey (2009) is available in English .

Is your question not listed? Ask your question here

Dodge Journey (2010)

Dodge Journey (2012)

Dodge Journey (2014)

Dodge Journey (2013)

Dodge Journey (2015)

Dodge Journey (2016)

Dodge Journey (2017)

Dodge Journey (2011)

Dodge Nitro (2007)

Dodge Avenger (2008)

• ASK A QUESTION
• REPAIR GUIDES
• BECOME A MEMBER
• LOG IN Login with Facebook OR Remember me NOT A MEMBER? FORGOT PASSWORD?
• PRIVACY POLICY
• TERMS AND CONDITIONS

How to jumpstart?

• 2009 DODGE JOURNEY
• 80,000 MILES

• 6,110 POSTS

Please login or register to post a reply.

Related battery jump content, 2009 dodge journey jump start, sponsored links.

• Contact •
• Help •
• About •
• Privacy Policy •
• Terms & Conditions

Ran When Parked - Car, Vehicle & Truck Guides and Repair Journals.

How to Boost a Dodge Journey: Enhancing Power and Performance

Experiencing a dead battery in your Dodge Journey can be a stressful situation, especially if you’re far from a mechanic or roadside assistance. Yet, with a bit of knowledge and the right tools, a properly executed jump-start is a straightforward solution.

In vehicles like the Dodge Journey, the process is slightly unique compared to other cars due to the placement of the battery and the use of remote terminals for safer and easier access during a boost.

To initiate the jump-starting process, it’s important to first locate these remote terminals. Typically, the battery in a Dodge Journey is tucked away under the vehicle’s chassis or behind the front bumper, necessitating the use of these remote points.

Our guidance through the process ensures efficiency and, most importantly, safety. The method involves connecting jumper cables to the positive terminal and to a ground, careful not to let the leads touch and cause a short circuit.

Preparing and positioning another functioning vehicle to assist with the jump-start is an essential step. We ensure that the assisting car’s battery has ample voltage and is compatible with your Dodge Journey.

Once connections are made and verified, the dead battery can draw power from the assisting vehicle to turn the engine over. The step-by-step instructions provided later make the procedure clear, detailing how to safely establish the connection, start the Dodge Journey, and remove the cables afterward to avoid any electrical mishaps.

JUMP TO TOPIC

• 1.1 Engine Enhancements for Better Horsepower and Torque
• 1.2 Improving Fuel Economy Through Engine Tuning
• 1.3 Exhaust and Induction Systems
• 2.1 Troubleshooting a Dead Battery
• 2.2 Installing a New Car Battery Safely
• 3.1 Interior Design and Amenities
• 4.1 Driving With Confidence: Safety Protocols
• 4.2 Vehicle Stability and Control Systems

Optimizing Performance with Upgrades

To elevate your Dodge Journey’s performance, we can focus on a range of modifications that boost horsepower and torque, refine fuel economy, and enhance the exhaust and induction systems. Insightful upgrades can lead us to a more responsive and engaging drive.

Engine Enhancements for Better Horsepower and Torque

The 3.6L Pentastar V6 engine that powers the Dodge Journey GT offers a solid foundation for performance mods. To increase acceleration, we can add a turbocharger or supercharger for forced induction, dramatically improving power output.

Upgrading the spark plugs and installing a high-performance chip can also yield noticeable gains in horsepower and torque. Mindful selection of these components ensures we get the most out of our V6 engine without the need for a more powerful V8.

Improving Fuel Economy Through Engine Tuning

Enhancing fuel economy while bolstering performance can be challenging but not impossible. One strategy involves fine-tuning the fuel system using a performance chip that adjusts the air to fuel ratios.

Moreover, installing a cold air intake helps the engine breathe better and operate more efficiently, which can modestly improve the vehicle’s fuel economy.

Exhaust and Induction Systems

Lastly, revamping the Journey’s exhaust system plays a crucial role in engine performance. A high-flow exhaust system can reduce back pressure and allow the engine to push out exhaust gases more freely, thereby increasing efficiency and power.

On the intake side, a cold air intake system complements this by allowing cooler, denser air into the engine, aiding in combustion.

Maintaining Your Car’s Electrical Health

Maintaining the electrical health of your car ensures that your vehicle starts reliably and your electrical components function as intended. It’s vital to address issues such as a dead battery swiftly to prevent being stranded with an unresponsive car.

Troubleshooting a Dead Battery

If your Dodge Journey won’t start and you hear a clicking sound , the issue often lies with the dead battery . Before attempting a jump start, check the battery terminals for corrosion and ensure they’re tight and clean.

If the terminals are in good condition, use a multimeter to test the power supply . A reading below 12.4 volts typically indicates that the battery is low on charge and may require a jump start or replacement.

Installing a New Car Battery Safely

Upon confirming that a battery replacement is necessary, first ensure your vehicle is turned off and in a stable position. Begin by…

• Removing the cables—start with the negative terminal to reduce the risk of sparks.
• Ensure the new car battery is the correct type and size for your Dodge Journey.
• Clean the cable connectors and the battery tray with a wire brush, removing all debris and corrosion.
• Install the new battery, securing it in place and connecting the positive terminal first, followed by the negative.

Keep the area well-ventilated and refrain from smoking or using open flames, as car batteries can emit flammable gases when charging or discharging. After installation, check the charging system regularly to ensure the new battery maintains an optimal charge level.

Design and Comfort Features

The Dodge Journey is engineered with a priority on interior comfort, making it a strong competitor in the crossover SUV category. From its spacious interior design to the advanced infotainment system, the Journey offers a range of amenities that cater to both driver and passenger needs.

Interior Design and Amenities

The interior of the Dodge Journey is crafted with a focus on both functionality and aesthetic appeal. The SXT trim level, which is one of the more popular configurations, provides a generous amount of cargo space to accommodate the requirements of most families and travelers.

• Flexible seating arrangements
• Ample cargo space for storage
• Soft-touch materials for added comfort

The Journey’s infotainment system stands out with its user-friendly interface which includes Bluetooth connectivity, allowing for hands-free calling and wireless audio streaming. This system is not only easy to navigate but also contributes to a safer driving experience by minimizing distractions.

In terms of interior lighting, the Dodge Journey offers an ambient atmosphere that makes for a more comfortable driving experience during night time journeys. This subtle lighting enhances the vehicle’s interior aesthetics while also providing practical illumination.

To further boost its comfort proposition, the Journey’s interior can be equipped with optional features such as heated seats and a heated steering wheel, enhancing the overall driving experience, especially in colder climates. The thoughtful design extends to small details, including multiple storage compartments and cup holders, ensuring that every feature adds to the crossover’s practicality and comfort.

Ensuring Safety and Stability

When boosting a Dodge Journey, considering safety measures and stability systems is paramount. We focus on integrating safety protocols and leveraging the vehicle’s stability control to drive with assurance.

Driving With Confidence: Safety Protocols

We understand that ground clearance and headlights are crucial for safety. Ground clearance ensures the vehicle can handle uneven terrain without damaging the undercarriage. To maintain this, we check that modifications do not significantly alter the factory-set ground clearance.

The right headlights, on the other hand, not only provide visibility during night drives but also signal our presence on the road, allowing for a safer driving experience.

Vehicle Stability and Control Systems

Stability control is a friend that works in the background but takes the forefront during critical moments.

The Electronic Stability Control (ESP) activates when it detects a discrepancy between the driver’s intended path and the vehicle’s actual path. It adjusts throttle response and can apply braking to specific wheels to help maintain directional control.

By maintaining these systems, we ensure that modifications not only improve performance but also keep safety at the core of our enhancements.

• Recent Posts

• Can a Car Run on Ethanol: Exploring Alternative Fuels in Modern Vehicles - May 27, 2024
• Car Brands with the Most Problems: Reliability Rankings Revealed - May 27, 2024
• Where to Buy Mazda Parts: Your Ultimate Guide for Quality Components - May 27, 2024

Related posts:

• Car Smells Like Gas When I Start It – Causes and Fixes
• Signs of Transmission Slipping – Causes and Solutions
• Clogged Exhaust Symptoms – Causes and How To Fix It
• What Causes a Push Rod to Bend? Grasp the Auto Secrets!
• TPMS Light Kia Sorento – How to Reset It Using 8 Easy Steps
• Hole in Exhaust of a Car: All Causes and Repairing Solutions
• What Tire Pressure Is Too Low: Recognizing Unsafe PSI Levels
• How Do You Know When You Need an Oil Change: Identifying the Signs

Home » Troubleshooting » Dodge Journey won’t start – causes and how to fix it

Dodge Journey won’t start – causes and how to fix it

Dodge Journey is a reliable road companion, but its a machine with hundreds of interconnected parts, and like any other machine it sometimes fail to deliver normal operation. In this article we go through most common causes of Journey breakdown and how you can fix the problem.

The most common causes that hinders normal starting operation of your Journey are dead 12v battery, corrosion on battery terminals, and dead key fob battery. However, bad alternator, clogged fuel filter, broken starter, blown fuse, empty gas tank, immobilizer error, or any fault in the electrical system can also cause your vehicle not to start.

1. Weak Battery

If your Journey’s engine won’t crank or cranks very slowly, then the most likely culprit is weak or dead 12v battery. Investigating more closely and doing a battery voltage test will clarify whether the starting problem is due to the battery. A test can be done to measure the voltage between the battery poles, check the acid level and assess the condition of the starter battery.

If a new car battery has been installed, the battery may not have yet reached its full capacity. There is nothing to worry about. A new battery only develops its full capacity over time.

Test 12v battery

The voltage of the battery on your Dodge Journey can be measured precisely with a multimeter. Before the test, the multimeter is set to the voltage range of the battery and connected to its plus and minus poles. Successful testing of the car battery, i.e. checking the voltage, usually results in values ​​of approx. 12 to 13 volts. Values ​​above 14 or below 11.5 volts require an expert assessment of the condition of the car battery. Because the battery may have a defect with these measured values ​​and must be replaced.

Jump start Dodge Journey

If dead battery is the reason for the breakdown of your Journey, you can easily jump start it using jumper cables and a healthy battery from another vehicle, or using a battery booster if available.

First connect red cable to the positive terminal of your Journey’s dead battery, then to the positive terminal of donor battery. Next connect black cable to the negative terminal of donor battery, then to the bare metal in the engine bay of your Journey. Start the donor vehicle and then your Journey. Remove the cables in reverse order.

2. Corrosion on battery

Corrosion on the contacts of your car battery leads to loss of contact and reduced current flow, which means that your engine can no longer start properly.

To know if your Journey’s starting problems are from dirty battery contacts, you need to investigate them. If you lift the rubber covers over the two battery terminals, you can check the terminals for corrosion. If you discover white deposits or silvery-green deposits, but no further cracks or damage, you do not have to replace the battery, just clean it.

Clean battery corrosion

To clean the battery on your Dodge Journey, you have to remove the pole cables first, which requires no special knowledge, just a little concentration, as the order is very important. First remove the black cable from the negative pole. If the pole clamp is very tight, you can open it with pliers. We advise against using metal pliers, but if you use them, you must make sure that you do not touch any other parts of the body. Next you can unplug the red positive pole cable. Once the battery has been removed from the circuit, you can start cleaning the corroded battery. After cleaning, reconnect the terminals.

3. Weak key fob battery

If your Journey has push start/stop button, then its possible that your vehicle may not start due to weak key fob battery. Don’t worry, you can still start your vehicle – the battery is only used to send the signal for locking/unlocking. If the key fob battery is empty, the door no longer locks or unlocks at the push of a button. The doors must then be opened manually. The immobilizer is controlled by a passive transponder. Passive means, among other things, that the transponder in the key does not need its own power source.

How to start Dodge Journey with dead key fob battery

If you have a model of Journey which only has a key fob with start/stop button and no place to insert a key, then try placing your key fob as close to the start/stop button as you can and then start the vehicle.

Tip: You can try starting your Journey with its second key. It will also rule out any other problem with the first key, for example, water damage.

4. Broken starter motor

A starter is a motor for starting the engine of your Journey. The average life of a starter motor is about 100,000 to 150,000 miles, and the life will be shortened if the engine is started more frequently. In any case, since the starter motor also has a limited life, it will break down after using the car for a long time, and if the starter motor breaks down, the engine will not start.

Symptom: When you turn the key to start the engine of your Journey, you will hear a clicking sound, which is the sound of a bad starter motor. And if the starter motor does not work with a healthy battery, suspect a malfunction of the starter.

If the starter fails, it usually needs to be replaced with a new one.

Temporary fix for starter

If the engine does not start due to the starter, the engine may start if you turn the key while hitting the starter motor with something like a stick or metal tool. This workaround is effective when the parts inside the starter are stuck together or the gears are slightly out of alignment.

However, it is possible that the starter is nearing the end of its life, so it is recommended that you have it inspected at a dealer or maintenance shop.

5. Defective alternator

An alternator is a generator that produces electricity. If your Journey’s alternator fails, it will not be able to produce electricity and the battery will not be able to charge. Therefore, even if you think that the cause of the engine not starting is a battery failure and replace the battery, the battery will soon run out and the engine will not start.

Alternators rarely break down. In particular, modern cars have improved performance, so it is said that they will last 200,000 to 300,000 miles. Still, it can break down depending on how you use it, and in the case of a used car, the alternator may be quite old. Don’t let your guard down.

If the alternator breaks down, it must be replaced with a new alternator.

6. Clogged fuel filter

The fuel filter of your Journey does not wear out like a mechanical part, but it gets clogged by dirt and airborne particles and clogs over time. The permeability of the filter drops, and so does the fuel pressure. To a certain extent this doesn’t matter, but if the fuel filter is too dirty, the engine will no longer perform at full capacity and in some instance may not start at all. Cleaning is not possible, you can only change the filter.

7. Fuel pump failure

If your Journey’s fuel pump fails, then the engine won’t start. The pump normally ensures that the necessary amount of fuel is passed from the tank to the injection system of the engine with sufficient pressure.

Before your fuel pump stops working, it usually becomes noticeable: if your car’s engine breaks down from time to time, the car is difficult to start, the engine jerks a little or the engine performance drops, you should have your pump checked.

Wear or contamination of the pump can be the reason for this. If the pump is leaking, a power contact is broken, a line or a pump lever is broken, the fuel pump is usually also noticeable before failure. You can have a defective fuel pump replaced in your workshop.

8. Blown fuse

In rare cases, a blown fuse could also be the culprit in the breakdown of your Journey. Check all fuses in the fuse box essential for starting the engine. But, be careful when lending a hand yourself to the fuse box! The box is under power and repairs or tests should always be done in a workshop.

9. Defective spark plugs

Without functioning spark plugs, the engine will not start. The spark plugs themselves are often not affected by a defect. Instead, plug connections on the ignition system come loose. If only one plug is actually loose, you can fix the problem yourself on site. If a spark plug has failed, it must be replaced in the workshop.

10. Rodent damage

Rodent damage can be another reason why your Dodge Journey won’t start. The animals crawl under the vehicle and bite through cables and wires. In principle, this can affect all vehicle systems such as the fuel supply, the oil supply or the power supply.

The rodent damage can usually be seen quickly by looking into the engine compartment. The damage caused by the rodent bite can be repaired in the workshop. Be prepared for relatively high costs here.

11. Engine failure

Although very rare, but it can also be the cause of the breakdown of your Journey. If a vehicle has an engine failure, then nothing works anymore. It is not uncommon for the driver of a vehicle to be responsible for such damage. Typical causes include tearing of the timing belt, incorrect fueling, insufficient oil, hydrolock, overheating of the engine, or continuous driving in an excessive speed range.

Only an experienced mechanic can diagnose engine failure in a workshop.

Use OBD2 scanner for diagnosis

Since Dodge Journey is equipped with on-board diagnostics (OBD), a fault diagnosis can provide initial indications of where the malfunction is located.

To begin troubleshooting, you must first connect the diagnostic tool to your Journey. The OBDII connector is usually located under the dashboard. With the wire connected, you should turn the ignition on. But be careful not to start the engine. Most diagnostic devices then ask for some information about the vehicle. It is important that you enter this 100% correctly, otherwise the result of the search may be falsified. In addition to the vehicle manufacturer and model, you usually also have to type in the engine and vehicle ID number. For exact troubleshooting, always check whether the information is correct.

There are many reasons why your Journey may not start. When looking for the trigger, you should always start with the most obvious cause, the empty battery.

In any case, it is advisable for laypersons to call a breakdown service or a workshop. In the event of a defect, the latter can directly initiate the repair.

4 thoughts on “ Dodge Journey won’t start – causes and how to fix it ”

My Dodge Journey will not start after driving a short time, and then stopping about 20 minutes, then try to start, press lock unlock wait 10 minutes, car will then start every time.

This is a problem I am having with my Dodge Journey as well. I haven’t had this SUV 3 years and I am still paying on it.

My 2017 Dodge Journey ran fine in the morning yesterday, was totally dead last night – no locks, no dash lights, no power button. Long story short – disconnected + positive cable under hood to reset computer. Put cables back on after 10 min wait – got feeble spark while attaching wires. Entered car, found 4-way flashers indicating on dash. Button was accidentally depressed after morning drive. Charged battery for 1 hour with battery charger. Started fine, but needed to be driven extensively to fully charge 69-month old battery. Buying new battery tomorrow.

My dodge journey 2014 is not starting. It was stripped for overheating but now after the reassemble it’s not starting, VIN initialising and press clutch to start engine are showing on the clock

• Lexus ES makes clicking noise and won’t start – causes and how to fix it
• Cadillac SRX shakes at highway speeds – causes and how to fix it
• Renault Scenic makes grinding noise when starting – common causes
• How to remote start Hyundai Elantra with key fob or mobile device
• Audi A6 key fob not working – causes and how to fix it
• Infiniti QX50 steering wheel controls not working – causes and how to fix it
• Is Chevy HHR key fob waterproof?
• VW Jetta windshield washer not working – causes and how to fix it
• Ram ProMaster door makes a squeaking noise when opening or closing
• Range Rover Velar low AC refrigerant symptoms, how to recharge
• Dodge Charger airbag light is on – causes and how to reset
• Jaguar XJ airbag light is on – causes and how to reset
• Fiat 124 Spider shakes at highway speeds – causes and how to fix it
• Nissan Maxima makes humming noise at high speeds – causes and how to fix it
• Volvo S60 steering wheel controls not working – causes and how to fix it
• Chevy Blazer heater not working – causes and diagnosis
• How to operate climate control on BMW 3-Series
• Maserati Quattroporte burning smell causes and how to fix it
• VW Jetta dirty cabin air filter symptoms, when to replace
• Buick Encore ABS light is on – causes and how to reset

Dodge Journey Not Starting: Causes + How to Fix

If your Dodge Journey doesn’t start, you’ve found the right article.  Many different issues can cause the problem.  We cover all the likely ones in an order that makes sense when diagnosing the issue at home.

This article is written with the assumption that you are looking for a way to get your Dodge Journey started now, and is meant to provide you with practical advice to help aid in the diagnosis.

First, is your Journey cranking over at all (the engine spins when you turn the key?  Or is the starter not engaging (you may hear a clicking sound)?

Table of Contents

Engine Not Cranking

Engine cranking, no start.

Here are the most common reasons why the Dodge Journey won’t start when the engine is not cranking .

1.  Battery Cables

Start by taking a look at the battery posts.  If they are loose or corroded, it acts as a barrier that can keep the starter from getting the voltage it needs to crank the engine.

If there appears to be green or white on them or the terminals, cleaning them may be what your Journey needs to get back on the road.

Here’s a good article from Napa on properly cleaning a battery terminal.

2.  Low Battery Voltage

As your vehicle’s battery ages, its cranking amperage decreases, leaving it with a diminished capacity for starting the engine.  Your Journey needs 12+ volts to start its engine .  

You can take your battery to the local parts store or even Walmart and have it tested to see if it still holds a charge.  

Alternatively, you can test the battery yourself with a voltage meter.  If the battery is in the vehicle and it’s under 12 volts, it’s likely bad unless your vehicle has been sitting for a while or something is drawing current.

If the battery is dead, it either isn’t storing enough voltage or it isn’t charging enough.

A bad alternator can cause your battery to drain to the point it can’t turn your Journey over. Suspect the alternator if the battery light stays on after charging your vehicle’s battery or jumping it.

3.  Starter Motor

The next thing to look at when your Journey isn’t starting would be the starter itself.  When the starter isn’t functioning, it is impossible to start your vehicle. 

A bad starter can make a clicking noise, no noise, or it can grind.  

When a starter goes bad, they will usually not give you much warning at first. Try repeatedly turning the key. Sometimes you’ll get lucky and it’ll “catch”.  

Or, you can beat the starter with a hammer. It really can get that one last start out of it.

Here are the common issues that can cause your Journey to crank but not start.  Your vehicle’s engine needs air, fuel, and a spark to run.

It is highly likely that if the engine is cranking but not starting that it has thrown an OBDII code. Use an OBDII scanner to check and see if the engine has thrown any trouble codes.  

The codes will likely be related to the potential issues listed below.  When applicable, we’ve listed the common trouble code(s) associated with the cause.

1.  Low Fuel Pressure

If your Journey isn’t getting enough fuel, or any fuel at all, it may have a bad fuel filter or a bad fuel pump .  Without the proper amount of fuel entering the combustion chamber, the Journey will crank but not start.

2.  Ignition Issues

One of the most significant issues that will cause a vehicle to crank but not start are ignition issues.  When there is no spark, the engine will not start.  You’ll probably have a misfire-related code such as P0300 , P0301, etc…

Many things, including bad spark plugs, bad coil packs, bad plug wires, computer issues, and more, can cause ignition issues. It’s likely your Journey had a rough idle before

3.  Engine Timing

If the engine’s ability to fire the spark plug at the right time is called “timing”.  If the spark plugs are firing at the wrong time, or something has happened to cause the camshaft to no longer be in sync with the crankshaft, your Journey won’t start.

There will usually be OBDII codes associated with timing-related problems, but not always.  P0013 is a common camshaft position-related code.  The crankshaft sensor can go bad as well.  When these sensors go bad, it can be impossible for your Journey to start.

4. Security

Most modern vehicles come with smart keys that have electronic protection built in.  This makes it more challenging for thieves to steal them.  

There are occasions where this security system will cause the Journey not to start, such as the key fob not working.  You’ll see a security warning when trying to crank the engine, though. 

5. Metering

MAF or MAP sensors measure the air entering your Journey’s engine.  If one of them has gone bad, it can cause the air-fuel mixture to be off enough to cause the vehicle not to start.

6.  Other Issues

There are a lot of issues that can cause your Journey not to start.  That’s why it is so important to check everything.  Here’s a great diagnostic chart that can walk you through diagnosing why a vehicle won’t start. 

Conclusion:  Dodge Journey Not Starting

There are many reasons that your Journey may not start.  Simple tests such as checking the battery with a voltage meter or scanning it with an OBD II scanner can really narrow down your list of potential causes.

Battery Saver Mode Dodge Journey [Meaning & Reset]

This article will provide an explanation of the meaning behind “Battery Saver Mode” coming up on your Dodge Journey, including its main causes and solutions for resetting the alert.

Without further delay, let’s dive in!

What Does “Battery Saver Mode” Mean on a Dodge Journey?

Table of Contents

The battery on your Dodge Journey plays a critical role in the operation of your vehicle.

It provides power to run all of the systems in your Dodge Journey, including the air conditioning, radio, and navigation system.

And when you start your engine, it also powers up the starter motor so it can turn over.

If the battery voltage drops below a certain level, the computer will automatically shut down some of these systems to save the battery.

This is known as “Battery Saver Mode” and is designed to protect your battery from draining completely, causing your car to stall.

Here are some things you might experience when the Battery Saver Mode alert appears:

• Your Dodge Journey may fail to start.
• Interior and exterior lights may become dimmer.
• The infotainment screen may stop working.
• The car may stall.
• Windows may malfunction.
• Battery Saver Mode Alert

What Causes the Dodge Journey “Battery Saver Mode” Alert?

Now that I have briefly explained what “battery saver mode” is,

Let’s now look at the main possible causes of this fault message.

1. Worn Out Battery:

The number one cause of the “battery saver mode” message on your Dodge Journey is a bad battery.

The most likely cause is that your battery is old and has reached the end of its life.

Over time the battery losses power, and its ability to hold a charge diminishes.

When this happens, the alternator can’t charge your battery properly,

And your Dodge Journey may enter “battery saver mode” in an effort to prevent the battery from over-discharging while you driving.

From my experience as a mechanic, a Dodge Journey battery should last at least 3-5 years before needing to be replaced.

If your car battery is older than this, then it may be time to replace it.

The quickest way to tell if your battery is bad is to jump-start your vehicle.

If this solves the problem, then you can be confident that the battery is bad and needs to be replaced.

2. Faulty Alternator:

The second most likely cause of the battery saver active problem is a damaged alternator.

The alternator is responsible for generating electricity that is used to charge your car battery.

If the alternator fails, it will be unable to generate enough power to keep up with the demands of starting your vehicle or performing other electrical functions.

This can cause your Dodge Journey to enter “battery saver mode” since the battery is not getting charged.

In fact, the opposite effect is happening.

One trick to check if the problem is caused by a bad alternator is to start the vehicle,

Then leave it running for a few minutes (3-5 minutes).

After that, disconnect the negative battery terminal.

If your Journey switches off as soon as you disconnect the negative battery terminal, then it’s a sign the alternator is bad.

If the car continues to run although you disconnected one of the terminals, then the problem is not with your alternator.

3. Loose Battery Terminals:

Another reason why your Dodge Journey is displaying “Battery saver mode” on the dashboard is that the battery terminals are loose.

When battery terminals are loose, it makes it difficult for power to flow from the alternator to the battery.

This makes it hard for your vehicle battery to charge and run at full capacity.

If you have a loose battery terminal, it can cause your Dodge Journey to enter Battery saver mode.

4. Worn Serpentine Belt:

The Serpentine belt (Also known as the Alternator belt) is a rubber-like belt in your Dodge that connects the pulley on your alternator and other components like the power steering pump and air-con.

If this belt breaks due to wear and tear, the pulleys won’t turn, which causes the alternator not to work.

As a result of this, a “Battery saver mode” warning message will come on.

How to Fix and Reset Dodge Journey’s “Battery Saver Mode” Message

Lastly, let’s look at how to go about combating this warning message.

Check the Battery Terminals

The first thing I recommend that you do is check the battery terminals and make sure that they’re tight.

If they’re loose, tighten them as much as you can with a screwdriver.

Whilst you are still there, you also want to check if there is no visible sign of corrosion on both terminals and the battery itself.

If there is corrosion, clean this off using a wire brush and hot water.

Then reconnect the battery terminals, if the message is still there, move on to step two.

2. Replace the Battery

If you have checked the battery terminals and there is no sign of corrosion, then you need to replace your car’s battery.

But before changing the battery, make sure that you have it tested (You can do this at your dealer or auto stores like Autozone).

The reason for this is that if you have a dead battery, it could be caused by something else, like not driving long enough.

You don’t want to replace the battery only to find out that it didn’t fix the problem (Unless your Dodge Journey battery is more than three years old)

So once you have changed your car battery, restart your car and see if the message still appears on your dashboard.

In most cases, replacing the battery will fix the problem.

3. Have the Alternator Tested/Replaced

If the battery is still in good condition, then the alternator may be the problem.

Have it tested to see if it’s working properly, or replaced it if necessary. A good alternator will read anywhere between 13.5 to 14.5 volts when you are idling.

Please Note: Other things like a Blown battery sensor fuse or bad ground wire can also trigger this alert, but from my experience, it always boils down to these three leading causes.

Additional Sources

https://www.lhmdodgeboise.com/dodge-battery.htm

https://www.autozone.com/lp/battery-services

https://www.dodgejourneyforum.com/topic/11913-intermittent-battery-drain/

Leave a Comment Cancel Reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

• Dodge Manuals
• JOURNEY 2019
• User manual

Dodge JOURNEY 2019 User Manual

• Quick reference manual (17 pages)
• page of 212 Go / 212

Table of Contents

• How to Find Your Owner'smanual Online
• How to Use this Manual
• Essential Information
• Warnings and Cautions
• Graphical Table of Contents
• Instrument Panel
• Ignition Switch
• Keyless Push Button Ignition
• Remote Start - if Equipped
• How to Use Remote Start
• To Enter Remote Start Mode
• General Information
• Vehicle Security Alarm - if Equipped
• To Arm the System
• To Disarm the System
• Keyless Enter-N-Go - Passive Entry (if Equipped)
• Child-Protection Door Lock System
• Manual Adjustment (Rear Seats)
• Front Heated Seats
• Head Restraints
• Supplemental Active Head Restraints (AHR) - Front Seats
• Rear Head Restraint Adjustment
• Rear Head Restraint Removal
• Steering Wheel
• Tilt/Telescoping Steering Column
• Heated Steering Wheel - if Equipped
• Exterior Lights
• Multifunction Lever
• Daytime Running Lights (DRL)
• High/Low Beam Switch
• Flash-To-Pass
• Automatic Headlights
• Headlights on with Wipers (Available with Automatic Headlights Only)
• Headlight Time Delay
• Fog Lights - if Equipped
• Turn Signals
• Wipers and Washers
• Windshield Wiper Operation
• Rear Window Wiper/Washer
• Climate Controls
• Automatic Climate Controls Overview
• Climate Control Functions
• Automatic Temperature Control (ATC) - if Equipped
• Operating Tips
• Power Windows
• Wind Buffeting
• Power Sunroof - if Equipped
• Opening Sunroof
• Closing Sunroof
• Sunshade Operation
• Anti Pinch Protect Feature
• Sunroof Maintenance
• Ignition off Operation
• Universal Garage Door Opener (Homelink)
• Before You Begin Programming Homelink
• Erasing All the Homelink Channels
• Identifying Whether You Have a Rolling Code or Non-Rolling Code Device
• Programming Homelink to a Garage Door Opener
• Programming Homelink to a Miscellaneous Device
• Reprogramming a Single Homelink Button
• Internal Equipment
• Power Outlets
• Power Inverter - if Equipped
• Roof Luggage Rack - if Equipped
• Instrument Cluster Display
• Instrument Cluster Display Location and Controls
• Oil Change Due
• Instrument Cluster Display Selectable Menu Items
• Battery Saver On/Battery Saver Mode Message - Electrical Load Reduction Actions - if Equipped
• Warning Lights and Messages
• Red Warning Lights
• Yellow Warning Lights
• Green Indicator Lights
• White Indicator Lights
• Blue Indicator Lights
• Onboard Diagnostic System - Obd II
• Onboard Diagnostic System (OBD II) Cybersecurity
• Auxiliary Driving Systems
• Tire Pressure Monitoring System (TPMS)
• Occupant Restraint Systems
• Occupant Restraint Systems Features
• Important Safety Precautions
• Seat Belt Systems
• Supplemental Restraint Systems (SRS)
• Child Restraints
• Transporting Pets
• Safety Tips
• Transporting Passengers
• Exhaust Gas
• Safety Checks You Should Make Inside the Vehicle
• Periodic Safety Checks You Should Make Outside the Vehicle
• Engine Break-In Recommendations - Gasoline Engine
• Speed Control - if Equipped
• To Activate
• To Set a Desired Speed
• To Vary the Speed Setting
• To Accelerate for Passing
• To Resume Speed
• To Deactivate
• PARKSENSE REAR PARK ASSIST - if EQUIPPED Parksense Sensors
• Parksense Warning Display
• Enabling and Disabling Parksense
• Parksense System Usage Precautions
• Parkview Rear Back up Camera
• Refueling the Vehicle
• Loose Fuel Filler Cap Message
• Materials Added to Fuel
• Trailer Towing
• Trailer Towing Weights (Maximum Trailer Weight Ratings)
• Recreational Towing (Behind Motorhome, Etc.)
• Towing this Vehicle Behind Another Vehicle
• Bulb Replacement
• Replacement Bulbs
• Interior Fuses
• Underhood Fuses (Power Distribution Center)
• Jacking and Tire Changing
• Jack Location
• Spare Tire Location and Removal
• Preparations for Jacking
• Jacking Instructions
• Road Tire Installation
• Spare Tire Stowage
• Jump Starting
• Preparations for Jump Start
• Jump Starting Procedure
• If Your Engine Overheats
• 2.4L Engine - if Equipped
• Gear Selector Override
• Freeing a Stuck Vehicle
• Towing a Disabled Vehicle
• All-Wheel Drive (AWD) Models
• Front-Wheel Drive (FWD) Models
• Enhanced Accident Response System (Ears)
• Event Data Recorder (Edr)
• Scheduled Servicing
• Maintenance Plan
• Engine Compartment
• 2.4L Engine
• Raising the Vehicle
• Tire Safety Information
• Tires - General Information
• Spare Tires - if Equipped
• Wheel and Wheel Trim Care
• Department of Transportation Uniform Tire Quality Grades
• Traction Grades
• Temperature Grades
• Wheel and Tire Torque Specifications
• Torque Specifications
• Flexible Fuel (3.6L Engine Only)
• E-85 General Information
• Fluid Capacities
• Fluids and Lubricants
• Mopar Accessories
• Authentic Accessories by Mopar
• Cybersecurity
• Radio 4.3 & 4.3S
• Radio 4.3 & 4.3S at a Glance
• Uconnect 3/3 Nav with 8.4-Inch Display
• Uconnect 3/3 NAV at a Glance
• Uconnect Settings
• Steering Wheel Audio Controls
• Left Switch
• Right Switch
• Playing Ipod/Usb/Mp3 Devices
• Audio Jack (AUX)
• SD Card (3/3 NAV Only)
• Bluetooth Streaming Audio
• Video Entertainment System (Ves)
• System Operation
• Operation of the Remote
• Auxiliary Audio/Video Input Jacks
• Navigation Overview
• Main Navigation Menu
• Following Your Route
• Siriusxm Travel Link (3 NAV Only)
• Uconnect Phone
• Uconnect Phone (Bluetooth Hands Free Calling)
• Pairing a Phone
• Making a Phone Call
• Receiving a Call - Accept (and End)
• Common Phone Commands (Examples)
• Mute (or Unmute) Microphone During Call
• Transfer Ongoing Call between Handset and Vehicle
• Voice Command Tips (3/3 NAV Only)
• Changing the Volume
• Voice Text Reply
• Uconnect Voice Command (3/3 Nav Only)
• Common Voice Commands (Examples)
• Common Navigation Voice Commands
• If You Need Assistance
• FCA US LLC Customer Center
• FCA Canada Inc. Customer Center
• In Mexico Contact
• Puerto Rico and U.S. Virgin Islands
• Customer Assistance for the Hearing or Speech Impaired (TDD/TTY)
• Service Contract
• Reporting Safety Defects
• In the 50 United States and Washington
• Publication Order Forms

Advertisement

Quick Links

Related manuals for dodge journey 2019.

Summary of Contents for Dodge JOURNEY 2019

• Page 1 2019 JOURNEY USER GUIDE...
• Page 2 I M P O R T A N T Get warranty and othe r informati on online – you ca n revi ew an d prin t or d o wn lo a d a c op y o f t h e Ow n er ’s M a n u a l, Na viga ti on/U connect manuals and the limited warra n ti es p rovi d ed b y FCA US L LC f or y ou r ve h ic le b y vi si tin g w ww.mopar.com (U.S.) or www.owners.mopar.ca (Ca n ad a ).

Page 3: How To Find Your Owner'smanual Online

Page 4: how to use this manual, page 5: graphical table of contents, page 6: table of contents.

• Page 7 To Accelerate For Passing ... . . 114 Jump Starting Procedure ... . . 135 WARNING LIGHTS AND MESSAGES ..60 Red Warning Lights .
• Page 8 E-85 General Information ... . . 164 USB Port ..... 181 Voice Text Reply .

Page 9: Instrument Panel

Page 10: interior, page 11: keys.

• Page 12 The Panic Alarm will stay on for three minutes To Lock The Doors And Liftgate Backup Starting Method unless you turn it off by either pushing the Panic In case the ignition switch does not change with Push and release the lock button on the key fob button a second time or drive the vehicle at a the push of a button, the key fob may have a low to lock all doors and liftgate.

Page 13: Ignition Switch

Page 14: remote start - if equipped, page 15: general information, page 16: to disarm the system.

• Page 17 • If the vehicle is unlocked by Passive Entry and To Unlock From The Passenger Side: no door is opened within 60 seconds, the With a valid Passive Entry key fob within 5 ft vehicle will re-lock and if equipped will arm (1.5 m) of the passenger door handle, grab the the security alarm.
• Page 18 If one of the vehicle doors is open and the vehicle is locked with a door panel switch, key fob button or door handle button, once all open doors have been closed the vehicle checks the inside and outside of the vehicle for any valid Passive Entry key fobs.

Page 19: Child-Protection Door Lock System

Page 20: seats, page 21: manual adjustment (rear seats).

• Page 22 2. Place one hand on the seatback and apply a Manual Folding Second Row Seat WARNING! gentle pressure. To Fold The Seat Do not drive the vehicle with the seat in this 3. Lift the control lever with the other hand, position, as it is only intended for entering and allow the seatback to move forward slightly, exiting the third row seats.
• Page 23 The seatback can also be locked in the reclined To Unfold The Seat To Fold The Seatback position. To do so, pull the latch release-loop Raise the seatback and lock it in place. Pull the latch release-loop located at the top of located at the top of the seatback upward, allow the seatback upward, push the seatback for- the seatback to recline, and release the...

Page 24: Front Heated Seats

Page 25: supplemental active head restraints (ahr) - front seats, page 26: rear head restraint adjustment, page 27: rear head restraint removal, page 28: exterior lights, page 29: daytime running lights (drl), page 30: headlights on with wipers (available with automatic headlights only), page 31: wipers and washers, page 32: rear window wiper/washer, page 33: climate controls.

• Page 34 Automatic Climate Controls Descriptions Icon Description MAX A/C Button Press the button on the touchscreen to change the current setting, the indicator illuminates when MAX A/C is on. Pressing it again turns the MAX A/C operation to switch into manual mode and the MAX A/C indicator turns off. NOTE: The MAX A/C button is only available on the touchscreen.
• Page 35 Icon Description Rear Defrost Button The Rear Defrost Control button turns on the rear window defroster and the heated outside mirrors (if equipped). An indicator will illuminate when the rear window defroster is on. The rear window defroster automatically turns off after ten minutes. Rear Climate Control Button Press and release this button to access the rear climate controls.
• Page 36 Icon Description Faceplate Knob Blower Control Blower Control is used to regulate the amount of air forced through the climate system. There are seven blower speeds avail- able. The speeds can be selected using either the blower control knob on the faceplate or the buttons on the touchscreen. •...
• Page 37 Icon Description Floor Mode Floor Mode Air comes from the floor outlets. A slight amount of air is directed through the defrost and side window demister outlets. Mix Mode Mix Mode Air is directed through the floor, defrost, and side window demister outlets. This setting works best in cold or snowy conditions that require extra heat to the windshield.
• Page 38 Icon Description Rear Auto Button Automatically controls the rear interior cabin temperature by adjusting airflow distribution and amount. Performing this func- tion will cause the system to switch between manual mode and automatic modes. Refer to "Automatic Operation" within this section for more information.
• Page 39 Icon Description Blower Control Blower Control is used to regulate the amount of air forced through the climate system. There are seven blower speeds avail- able. Adjusting the blower will cause automatic mode to switch to manual operation. The speeds can be selected using the buttons on the touchscreen.
• Page 40 1. Adjust the Rear Blower, Rear Temperature Rear Automatic Temperature Control (ATC) NOTE: and the Rear Modes to suit your comfort • It is not necessary to move the temperature needs. settings. The system automatically adjusts the temperature, mode and fan speed to pro- 2.
• Page 41 Icon Description Bi-Level Mode Bi-Level Mode Air comes from both the headliner outlets and the floor outlets. NOTE: In many temperature positions, the Bi-Level mode is designed to provide cooler air out of the headliner outlets and warmer air from the floor outlets. Floor Mode Floor Mode Air comes from the floor outlets.

Page 42: Climate Control Functions

Page 43: automatic temperature control (atc) - if equipped, page 44: windows.

• Page 45 To close the window part way, pull the window Auto-Down Feature Window Lockout Switch switch up to the first detent and release it when The driver's power window switch has an Auto- The window lockout switch on the driver's door you want the window to stop.

Page 46: Wind Buffeting

Page 47: opening sunroof, page 48: hood, page 49: universal garage door opener (homelink), page 50: before you begin programming homelink, page 51: programming homelink to a garage door opener, page 52: programming homelink to a miscellaneous device, page 53: internal equipment.

• Page 54 CAUTION! • Do not exceed the maximum power of 160 Watts (13 Amps) at 12 Volts. If the 160 Watt (13 Amp) power rating is ex- ceeded the fuse protecting the system will need to be replaced. • The power outlet on the bottom of the center console shares the fuse with the power outlet on the back of the console.
• Page 55 Power Outlet Fuses 1 — F103 20 Amp Yellow — Power Outlet Console Bin And Power Outlet Console Rear 2 — F102 20 Amp Yellow — Cigar Lighter Instrument Panel And Power Outlet Left Rear Cargo Area...

Page 56: Power Inverter - If Equipped

Page 57: roof luggage rack - if equipped.

• Page 58 2. Relocate the crossbars, aligning the crossbar The tie down holes on the crossbar ends CAUTION! stanchions (end pieces) with one of the ver- should always be used to tie down the load. • Crossbars should remain equally spaced or tical marks on the outboard surface of the Check the straps frequently to be sure that the parallel at any roof rack position for proper...

Page 59: Instrument Cluster Display

Page 60: oil change due.

• Page 61 Load reduction is only active when the engine is The electrical loads that may be switched off (if • Unusual driving cycles (short trips separated running. It will display a message if there is a equipped), and vehicle functions which can be by long parking periods).

Page 62: Warning Lights And Messages

• Page 63 Warning Light, which will turn on when the Operation of the Brake Warning Light can be — Engine Coolant Temperature Warn- brake fluid level in the master cylinder has checked by turning the ignition switch from the ing Light dropped below a specified level. OFF position to the ON/RUN position.
• Page 64 transmission in PARK or NEUTRAL, until the This indicates a possible problem with the elec- turn off. If the light remains on with the vehicle light turns off. Once the light turns off, you may trical system or a related component. running, your vehicle will usually be drivable;...

Page 65: Yellow Warning Lights

• Page 66 — Electronic Stability Control (ESC) — Electronic Stability Control (ESC) Off CAUTION! Active Warning Light — If Equipped Warning Light — If Equipped steering. If a tire puncture occurs, repair This warning light will indicate when the Elec- This warning light indicates the Electronic Sta- immediately using the dedicated tire repair tronic Stability Control system is Active.
• Page 67 tire failure. Under-inflation also reduces fuel vehicle that prevent the TPMS from functioning — Anti-Lock Brake (ABS) Warning efficiency and tire tread life, and may affect the properly. Always check the TPMS malfunction Light vehicle’s handling and stopping ability. telltale after replacing one or more tires or This warning light monitors the Anti-Lock Brake wheels on your vehicle to ensure that the re- Please note that the TPMS is not a substitute for...

Page 68: Green Indicator Lights

Page 69: onboard diagnostic system (obd ii) cybersecurity, page 70: auxiliary driving systems.

• Page 71 Warning Light. Driving the vehicle may cause • The TPMS is not a substitute for proper tire CAUTION! maintenance, and it is the driver’s responsibil- the tire pressure to rise to approximately 28 psi • Using aftermarket tire sealants may cause ity to maintain correct tire pressure using an (193 kPa), but the Tire Pressure Monitoring the Tire Pressure Monitoring System...
• Page 72 The TPMS consists of the following compo- NOTE: nents: When filling warm tires, the tire pressure may need to be increased up to an additional 4 psi • Receiver module (28 kPa) above the recommended cold placard • Four tire pressure monitoring sensors pressure in order to turn the Tire Pressure Moni- toring System Warning Light off.
• Page 73 TEM" message will no longer display, and a chime will sound. In addition, the graphic in display a new pressure value instead of dashes the instrument cluster will still display a pres- (- -), as long as no tire pressure is below the pressure value will display in place of the sure value in a different color and an "Inflate low-pressure warning limit in any of the four...

Page 74: Occupant Restraint Systems

Page 75: seat belt systems.

• Page 76 The outboard front passenger seat BeltAlert is Enhanced Seat Belt Use Reminder System BeltAlert Warning Sequence not active when the outboard front passenger (BeltAlert) The BeltAlert warning sequence is activated seat is unoccupied. BeltAlert may be triggered when the vehicle is moving above a specified Driver and Passenger BeltAlert (if equipped) when an animal or other items are placed on the vehicle speed range and the driver or outboard...
• Page 77 Lap/Shoulder Belts WARNING! WARNING! All seating positions in your vehicle are • It is dangerous to ride in a cargo area, lap/shoulder belt or a lap belt for more than equipped with lap/shoulder belts. inside or outside of a vehicle. In a collision, one person, no matter what their size.
• Page 78 1. Enter the vehicle and close the door. Sit WARNING! WARNING! back and adjust the seat. • A seat belt that is too loose will not protect modify the seat belt system. Seat belt 2. The seat belt latch plate is above the back of you properly.
• Page 79 6. To release the seat belt, push the red button belt away from your neck. Push or squeeze the NOTE: anchorage button to release the anchorage, and The adjustable upper shoulder belt anchorage is on the buckle. The seat belt will automati- move it up or down to the position that serves equipped with an Easy Up feature.
• Page 80 Position the lap belt snug and low below the Seat Belt Extender WARNING! abdomen and across the strong bones of the If a seat belt is not long enough to fit properly, long enough and only use in the recom- hips.
• Page 81 essary to comfortably wrap around the occu- Energy Management Feature — If Equipped pant’s mid-section. Slide the latch plate into the The front outboard seat belt system is equipped buckle until you hear a "click." and the second row outboard seat belt system In Automatic Locking Mode, the shoulder belt is may be equipped with an Energy Management automatically pre-locked.
• Page 82 How To Engage The Automatic Locking Mode How The Active Head Restraints (AHR) Work WARNING! 1. Buckle the combination lap and shoulder The Occupant Restraint Controller (ORC) deter- • Failure to replace the seat belt assembly belt. mines whether the severity or type of rear im- could increase the risk of injury in colli- pact will require the Active Head Restraints sions.
• Page 83 Active Head Restraint (AHR) Components: NOTE: WARNING! For more information on properly adjusting and positioning the head restraint, refer to “Head • All occupants, including the driver, should Restraints” in “Getting To Know Your Vehicle.” not operate a vehicle or sit in a vehicle’s seat until the head restraints are placed in Resetting Active Head Restraints (AHR) their proper positions in order to minimize...

Page 84: Supplemental Restraint Systems (Srs)

• Page 85 • The Air Bag Warning Light remains on after Front Air Bags the four to eight-second interval. This vehicle has front air bags and lap/shoulder • The Air Bag Warning Light comes on intermit- belts for both the driver and front passenger. tently or remains on while driving.
• Page 86 Driver And Passenger Front Air Bag WARNING! WARNING! Features • Being too close to the steering wheel or • No objects should be placed over or near The Advanced Front Air Bag system has multi- instrument panel during front air bag de- the air bag on the instrument panel or stage driver and front passenger air bags.
• Page 87 When the ORC detects a collision requiring the Front Air Bag Operation Supplemental Driver Knee Air Bag front air bags, it signals the inflator units. A Front Air Bags are designed to provide addi- This vehicle is equipped with a Supplemental large quantity of non-toxic gas is generated to tional protection by supplementing the seat Driver Knee Air Bag mounted in the instrument...
• Page 88 The SABs may help to reduce the risk of occu- the door. The SAB moves at a very high speed pant injury during certain side impacts, in ad- and with such a high force that it could injure dition to the injury reduction potential provided occupants if they are not seated properly, or if by the seat belts and body structure.
• Page 89 The SABIC deploys downward, covering the side The Side Air Bags will not deploy in all side WARNING! windows. An inflating SABIC pushes the out- collisions, including some collisions at certain vehicle. Do not add roof racks that require side edge of the headliner out of the way and angles, or some side collisions that do not im- permanent attachments (bolts or screws) covers the window.
• Page 90 Air Bag System Components Rollover Events WARNING! Side Air Bags are designed to activate in certain NOTE: seat belts properly and sit upright with rollover events. The ORC determines whether The Occupant Restraint Controller (ORC) moni- their backs against the seats. Children the deployment of the Side Air Bags in a par- tors the internal circuits and interconnecting must be properly restrained in a child re-...
• Page 91 irritation, rinse the area with cool water. For If A Deployment Occurs Enhanced Accident Response System nose or throat irritation, move to fresh air. If The front air bags are designed to deflate imme- In the event of an impact, if the communication the irritation continues, see your doctor.
• Page 92 • Cut off battery power to the: Enhanced Accident Response System Reset WARNING! – Engine Procedure • It is dangerous to try to repair any part of – Electric Motor (if equipped) In order to reset the Enhanced Accident Re- the air bag system yourself.

Page 93: Child Restraints

• Page 94 Before buying any restraint system, make sure • Canadian residents should refer to Transport NOTE: that it has a label certifying that it meets all Canada’s website for additional information: • For additional information, refer to http:// applicable Safety Standards. You should also http://www.tc.gc.ca/eng/motorvehiclesafety/ www.nhtsa.gov/parents-and-caregivers or call: make sure that you can install it in the vehicle...
• Page 95 Infant And Child Restraints WARNING! WARNING! Safety experts recommend that children ride Do not install a rear-facing car seat using a • Never place a rear-facing child restraint in rear-facing in the vehicle until they are two years rear support leg in this vehicle. The floor of front of an air bag.
• Page 96 Older Children And Child Restraints Integrated Child Booster Seat — If WARNING! Equipped Children who are two years old or who have • Improper installation can lead to failure of The Integrated Child Booster Seat is located in outgrown their rear-facing convertible child seat an infant or child restraint.
• Page 97 To position a child into the Integrated Child 3. Lift the seat cushion up and push back to 6. Slide the latch plate up the webbing as far as lock it in the booster seat position. Booster Seat follow these steps: necessary to allow the seat belt to go around the child’s lap.
• Page 98 If the answer to any of these questions was Children Too Large For Booster Seats WARNING! “no,” then the child still needs to use a booster Children who are large enough to wear the seat in this vehicle. If the child is using the In a severe collision, the booster seat may be shoulder belt comfortably, and whose legs are lap/shoulder belt, check seat belt fit periodically...
• Page 99 Recommendations For Attaching Child Restraints Restraint Type Combined Weight of the Use Any Attachment Method Shown With An “X” Below Child + Child Restraint LATCH – Lower Anchors Seat Belt Only LATCH – Lower Anchors Seat Belt + Top Tether Only + Top Tether Anchor Anchor...
• Page 100 Your vehicle is equipped with the child restraint Lower Anchors And Tethers For CHildren LATCH Positions For Installing Child anchorage system called LATCH, which stands Restraints In This Vehicle (LATCH) Restraint System for Lower Anchors and Tethers for CHildren. The LATCH system has three vehicle anchor points for installing LATCH-equipped child seats.
• Page 101 Frequently Asked Questions About Installing Child Restraints With LATCH Use the LATCH anchorage system until the combined weight of the child What is the weight limit (child’s weight + weight and the child restraint is 65 lbs (29.5 kg). Use the seat belt and tether an- of the child restraint) for using the LATCH anchor- 65 lbs (29.5 kg) chor instead of the LATCH system once the combined weight is more than...
• Page 102 facing child restraints will also be equipped Locating The LATCH Anchorages Locating The Upper Tether Anchorages with a tether strap. The tether strap will have a hook at the end to attach to the top tether The lower anchorages are round bars that are There are tether strap anchorages behind each anchorage and a way to tighten the strap after it found at the rear of the seat cushion where it...
• Page 103 2. Left outboard and center seating positions WARNING! (3 and 2): Install the first child seat in the • If you are installing three child restraints left outboard seating position using lower next to each other, you must use the seat anchorages D and E.
• Page 104 1. Loosen the adjusters on the lower straps and 5. Tighten all of the straps as you push the child straint installation, instead of buckling it behind on the tether strap of the child seat so that restraint rearward and downward into the seat. the child restraint, route the seat belt through you can more easily attach the hooks or Remove slack in the straps according to the...
• Page 105 are designed to keep the lap portion of the seat Installing Child Restraints Using The Ve- Lap/Shoulder Belt Systems For Installing belt tight around the child restraint so that it is hicle Seat Belt Child Restraints In This Vehicle not necessary to use a locking clip. The ALR Child restraint systems are designed to be se- retractor can be “switched”...
• Page 106 Frequently Asked Questions About Installing Child Restraints With Seat Belts What is the weight limit (child’s weight + weight Always use the tether anchor when using the seat belt to install a forward of the child restraint) for using the Tether Anchor Weight limit of the facing child restraint, up to the recommended weight limit of the child re- with the seat belt to attach a forward facing child...
• Page 107 2. Pull enough of the seat belt webbing from 7. Finally, pull up on any excess webbing to Installing A Child Restraint With A Cinching the retractor to pass it through the belt path tighten the lap portion around the child re- Latch Plate (CINCH) —...
• Page 108 2. Next, pull enough of the seat belt webbing Any seat belt system will loosen with time, so Installing Child Restraints Using The Top from the retractor to pass it through the belt check the belt occasionally, and pull it tight if Tether Anchorage path of the child restraint.
• Page 109 1. Look behind the seating position where you 2. Route the tether strap to provide the most plan to install the child restraint to find the direct path for the strap between the anchor tether anchorage. You may need to move the and the child seat.

Page 110: Transporting Pets

Page 111: safety checks you should make inside the vehicle, page 112: periodic safety checks you should make outside the vehicle.

• Page 113 Door Latches Check for proper closing, latching, and locking. Fluid Leaks Check area under the vehicle after overnight parking for fuel, coolant, oil, or other fluid leaks. Also, if gasoline fumes are detected or if fuel, or brake fluid leaks are suspected. The cause should be located and corrected immediately.

Page 114: Engine Break-In Recommendations - Gasoline Engine

Page 115: to activate, page 116: to accelerate for passing, page 117: parksense rear park assist - if equipped parksense sensors.

• Page 118 • Jackhammers, large trucks, and other vibra- can result in the system misinterpreting a WARNING! close object as a sensor problem, causing the tions could affect the performance of mount and hitch ball assembly, depending “SERVICE PARK ASSIST SYSTEM” message ParkSense.

Page 119: Parkview Rear Back Up Camera

Page 120: refueling the vehicle, page 121: loose fuel filler cap message, page 122: trailer towing, page 123: recreational towing (behind motorhome, etc.), page 124: bulb replacement, page 125: fuses, page 126: interior fuses, page 127: underhood fuses (power distribution center).

• Page 128 Cavity Cartridge Fuse Mini-Fuse Description F139 40 Amp Green – Climate Control System Blower F140 30 Amp Pink – Power Locks F141 40 Amp Green – Anti-Lock Brake System F142 40 Amp Green – Glow Plugs – If Equipped F143 40 Amp Green –...
• Page 129 Cavity Cartridge Fuse Mini-Fuse Description F163 50 Amp Red – Cabin Heater #2 – If Equipped F164 – 25 Amp Clear Powertrain Auto Shutdown F165 – 20 Amp Yellow Powertrain Shutdown F166 – 20 Amp Yellow Spare F167 – 30 Amp Green Powertrain Shutdown F168 –...

Page 130: Jacking And Tire Changing

Page 131: preparations for jacking.

• Page 132 WARNING! • Turn on the Hazard Warning flasher. • Block the wheel diagonally opposite the wheel to be raised. • Apply the parking brake firmly and set the transmission in PARK. • Never start or run the engine with the vehicle on a jack.
• Page 133 3. Place the jack in the notches underneath the WARNING! lift area that is closest to the flat tire. Center the jack saddle between the drain flute for- Raising the vehicle higher than necessary mations on the sill flange. Turn the jack can make the vehicle less stable.
• Page 134 7. Install the wheel nuts with the cone-shaped 10. Lower the jack to its fully closed position. end of the nut toward the wheel. Lightly 11. Place the deflated (flat) tire in the cargo tighten the wheel nuts. area. Do not stow the deflated tire in the spare tire stowage location.

Page 135: Road Tire Installation

Page 136: spare tire stowage, page 137: jump starting procedure, page 138: if your engine overheats, page 139: 2.4l engine - if equipped, page 140: towing a disabled vehicle, page 141: all-wheel drive (awd) models, page 142: enhanced accident response system (ears), page 143: scheduled servicing, page 144: maintenance plan.

• Page 145 Mileage or time passed (whichever comes first) Or Years: Or Kilometers: Additional Inspections Inspect the CV joints. Inspect front suspension, tie rod ends, and replace if necessary. Inspect the brake linings, parking brake function. Additional Maintenance Replace engine air filter. Replace air conditioning filter.
• Page 146 ** The spark plug change interval is mileage Heavy Duty Use Of The Vehicle based only, yearly intervals do not apply. Change engine oil at 4,000 miles (6,500 km) or 350 hours of engine run time if the vehicle is WARNING! operated in a dusty and off road environment or is operated predominately at idle or only very...

Page 147: Engine Compartment

Page 148: l engine, page 149: raising the vehicle.

• Page 150 Tire Sizing Chart EXAMPLE: Example Size Designation: P215/65R15XL 95H, 215/65R15 96H, LT235/85R16C, T145/80D18 103M, 31x10.5 R15 LT P = Passenger car tire size based on U.S. design standards, or "..blank.." = Passenger car tire based on European design standards, or LT = Light truck tire based on U.S.
• Page 151 EXAMPLE: Load Identification: Absence of the following load identification symbols on the sidewall of the tire indicates a Standard Load (SL) tire: • XL = Extra load (or reinforced) tire, or • LL = Light load tire or • C, D, E, F, G = Load range associated with the maximum load a tire can carry at a specified pressure Maximum Load –...
• Page 152 EXAMPLE: 01 = Number representing the year in which the tire was manufactured (two digits) • 01 means the year 2001 • Prior to July 2000, tire manufacturers were only required to have one number to represent the year in which the tire was manufactured. Example: 031 could represent the 3rd week of 1981 or 1991 Tire Terminology And Definitions Term...
• Page 153 This placard tells you important information Tire Loading And Tire Pressure about the: NOTE: 1. Number of people that can be carried in the The proper cold tire inflation pressure is listed vehicle. on the driver’s side B-Pillar or the rear edge of the driver's side door.
• Page 154 (4) The resulting figure equals the avail- To determine the maximum loading conditions Metric Example For Load Limit of your vehicle, locate the statement “The com- able amount of cargo and luggage load For example, if “XXX” amount equals 635 kg bined weight of occupants and cargo should capacity.

Page 156: Tires - General Information

• Page 157 three hours, or driven less than 1 mile (1.6 km) Tire Inflation Pressures Tire Pressures For High Speed Operation after sitting for a minimum of three hours. The The proper cold tire inflation pressure is listed The manufacturer advocates driving at safe cold tire inflation pressure must not exceed the on the driver's side B-Pillar or rear edge of the speeds and within posted speed limits.
• Page 158 Radial Ply Tires Run Flat Tires — If Equipped Tire Spinning Run Flat tires allow you the capability to drive When stuck in mud, sand, snow, or ice condi- WARNING! 50 miles (80 km) at 50 mph (80 km/h) after a tions, do not spin your vehicle's wheels above rapid loss of inflation pressure.
• Page 159 • Tire pressure - Improper cold tire inflation Keep dismounted tires in a cool, dry place with pressures can cause uneven wear patterns to as little exposure to light as possible. Protect develop across the tire tread. These abnormal tires from contact with oil, grease, and gasoline. wear patterns will reduce tread life, resulting Replacement Tires in the need for earlier tire replacement.

Page 160: Tire Types

Page 161: spare tires - if equipped.

• Page 162 Inflate collapsible tire only after the wheel is Compact Spare Tire — If Equipped WARNING! properly installed to the vehicle. Inflate the The compact spare is for temporary emergency collapsible tire using the electric air pump be- Compact and collapsible spares are for tem- use only.

Page 163: Wheel And Wheel Trim Care

Page 164: department of transportation uniform tire quality grades, page 165: traction grades, page 166: wheel and tire torque specifications, page 167: fluid capacities, page 168: fluids and lubricants, page 169: chassis.

• Page 170 EXTERIOR: • Fog Lights • Molded Splash Guards • Front Air Deflector • Hitch Receiver INTERIOR: • Cargo Tray • Slush Mats • Door Sill Guards • Premium Carpet Floor Mats • Katzkin Leather Interiors ELECTRONICS: • Park Assist • Mopar Web (Wi-Fi) •...

Page 171: Cybersecurity

Page 172: radio 4.3 & 4.3s.

• Page 173 Displaying The Time Audio Settings Balance/Fade • If the time is not currently displayed at the top • Push the SETTINGS button on the faceplate • Press the “Balance/Fade” button on the of the screen when in Radio mode, push the on the right side of the unit.

Page 174: Radio

• Page 175 • To access the Radio mode, push the RADIO Store Radio Presets Manually button on the upper left side of the faceplate. Your radio can store 12 total preset stations. They are shown at the top of your screen. To see Selecting Radio Stations all 12 stations, press the “All”...

Page 176: Media

• Page 177 • The iPod/CD/AUX controls are accessed by NOTE: pushing the PLAYER button on the faceplate Uconnect will usually automatically switch to to enter the Player main screen, then press the the appropriate mode when something is first “Source” button on the touchscreen and connected or inserted into the system.

Page 178: Uconnect 3/3 Nav With 8.4-Inch Display

• Page 179 • Press “+” or “–” next to Set Time Hours and Displaying The Time Equalizer Set Time Minutes to adjust the time. • If the time is not currently displayed on the • Press the “Equalizer” button on the touch- radio or player main page, press the “More”...

Page 180: Radio

Page 181: media, page 182: uconnect settings, page 183: steering wheel audio controls, page 184: sd card (3/3 nav only), page 185: operation of the remote, page 186: main navigation menu.

• Page 187 Acquiring Satellites Finding A Place By Spelling The Name Setting Or Changing Your Home Location • The GPS Satellite strength bars indicate the • From the Main Navigation Menu press “Where • Press the “Nav” button on the touchscreen in strength of your satellite reception.

Page 188: Following Your Route

Page 189: siriusxm travel link (3 nav only), page 190: uconnect phone.

• Page 191 Start Pairing Procedure On Mobile Phone NOTE: Keep in mind that software updates – either on • Search for available devices on your Bluetooth your phone or Uconnect system – may interfere enabled mobile phone. This is usually within with the Bluetooth connection. If this happens, Settings or Options under “Bluetooth.”...
• Page 192 Phone Menu Screen — Radio 4.3 & 4.3S 1 — Redial Last Number 7 — Manage Paired Phones 2 — Phone Signal 8 — Conference Call 3 — Current Phone 9 — Direct Dial 4 — Phone Battery Level 10 — Recent Call List 5 —...
• Page 193 Phone Menu Screen — Uconnect 3/3 NAV 1 — Favorite Phonebook Entries 8 — Manage Paired Phones 2 — Phone Battery Level 9 — SMS (text messaging) 3 — Current Phone 10 — Direct Dial 4 — Phone Signal 11 — Recent Call List 5 —...

Page 194: Making A Phone Call

Page 195: voice text reply, page 196: uconnect voice command (3/3 nav only).

• Page 197 • Locating an address can be given as a one The following chart lists the navigation voice WARNING! commands that may be available. shot entry. For example, after saying “Find Address” and the system is ready, you can say Any voice commanded system should be Navigation Voice Commands: the entire address in one command, used only in safe driving conditions following...

Page 198: If You Need Assistance

Page 199: customer assistance for the hearing or speech impaired (tdd/tty), page 200: reporting safety defects, page 201: index.

• Page 202 Compact Spare Tire ... . .160 Towing ....138 Flexible Fuel Vehicles Engine .....145 Contract, Service .
• Page 203 Headlights iPod/USB/MP3 Control ..174, 179, 181 Air Bag ....60, 82, 109 Automatic ....27 Bluetooth Streaming Audio .
• Page 204 Loading Vehicle Octane Rating, Gasoline (Fuel) ..166 Inverter ....54 Tires ....151 Oil, Engine .
• Page 205 Panic Alarm ....10 Lap/Shoulder Belt Untwisting ..77 Spark Plugs ....166 Replacement Bulbs .
• Page 206 Tires ... .110, 154, 159, 162 Tire Safety Information... .147 Vehicle Storage ....41 Aging (Life Of Tires) .
• Page 211 D O D G E . C O M ( U . S . ) D R I V I N G A N D The driver’s pri ma ry r es p on si b ili ty i s th e safe opera ti on of th e ve h icl e.
• Page 212 Dodge brand vehicle. Simply download the app, select your make and model and enjoy the ride. To get this app, go...

Rename the bookmark

Delete bookmark, delete from my manuals, upload manual.

How to Jumpstart a 2010 Dodge Journey Hero 3.5L V6

Dodge journey model years - 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019.

How to properly jump start a car with the correct cable order

Hans Angermeier is an ASE certified Maintenance and Light Repair Technician and has produced over 100,000 videos showing drivers how to fix things on their cars. He has broad expertise on basic repair procedures covering the majority of cars on the road. Over the past 10 years, Hans has been focused on building CarCareKiosk, which is visited by millions of drivers each month.

Power steering fluid is easy to check and many people (mechanics included) often forget about - learn how here

Carmakers are hiding interior fuse boxes all over the place these days - see how to check your interior fuses here!

Properly inflated tires is the easiest way to improve fuel economy. The right tire pressure is NOT on the side of your tire btw

Leaking coolant is usually a sign that your water pump needs to be replaced. This video shows you how to quickly plug it

• Rosen helped make these videos
• Download Dodge owners manuals

This video shows you how to use jumper cables to jump start a dead battery in your 2010 Dodge Journey. If you get into your Journey, turn the key, and your car doesn't start (you may hear nothing or a clicking sound from the engine bay), you have a dead battery and need a jump-start. Check to see if you left your headlights or an interior light on and turn the switch off. Assuming that you have a pair of jumper cables, a pair of safety glasses and a friend to give you a jumpstart, the video above will show you where to connect the cables (and in what order!) for your Journey.

So what's up with the safety glasses? There is a small possibility of a battery exploding during the charging process if you don't connect the cables properly (causing a spark) and there is a bunch of hydrogen gas around the battery (car batteries emit hydrogen gas when they discharge) - this is much more of an issue with cars that haven't been driven for a long time than if you drive your Journey regularly and simply forgot to turn your lights off.

• Advance Auto coupon for 20% off entire order: KIOSK20