shunt trip device definition

Galvin Power is reader-supported. When you buy via our links, we may earn a commission at no cost to you. Learn more

What is a Shunt Trip Breaker and How Does It Work?

Written by  Edwin Jones  / Fact checked by  Andrew Wright

What is a shunt trip breaker? Does it add protection to your electrical system?

The shunt trip breaker is a combination of the shunt trip accessory and the main circuit breaker. This installs on the main breaker to add protection to your electrical system. This adds security to your electrical system as it manually or automatically cuts the electric supply in your circuit.

This accessory can help prevent short circuits and avoid electrical damage should a disaster occur in your home.

Let me tell you more about the shunt trip breaker to help you decide if you need additional protection for your electrical system.

Table of Contents

What is Shunt Trip Breaker and How Does It Work

Where are shunt trip breakers most used, how to install a shunt trip accessory to the breaker.

You should know that shunt trip breakers are different from GFCI circuit breakers.

The GFCI circuit breaker contains one big white tail wire for neutral connections only. It cannot be connected to any control package because the GFCI circuit breaker is solely designed to detect a sudden electrical surge. It has no other purpose but to cut power in case of a short.

Meanwhile, the shunt trip breaker wiring comprises two wires. One connected to the ground, and another to a control system. The control system can be connected to a sensor or to a manual switch. When activated, the shunt trip accessory will cause the main breaker to trip.

For example, if you install a shunt trip with a smoke detector, it will activate and cut off the power should the smoke sensor trigger. It can also be installed with a remote switch , allowing you to trip your breaker manually.

It is crucial to know the difference between a regular circuit breaker and a circuit breaker installed with shunt trip accessories.

The shunt trip definition means that it is a way to cut off electrical power through other sensors, not just via thermal activation. Since this is an optional accessory for a circuit breaker, it is not required for a home electrical system.

However, it is recommended for added safety. This is especially true if you’re working with industrial machinery. Furthermore, you can use it as a manual emergency switch to shut down your main breaker.

Before installing a shunt trip, consider its cost and your existing system. You may need to change the breaker panel  and circuit breakers, especially if it is not compatible with shunt trips. You may also need a new line to connect the remote emergency switch to your breaker box.

Generally, most commercial kitchens, elevators, and offices have this shunt trip breaker because it is required. Commercial kitchens use this device in compliance with ANSI/ASME CSD-1, while elevators and escalators comply with ASME A17.1. These codes refer to the controls and safety standards provided by ASME’s.

This question is a topic of discussion among Reddit members as well. Join the conversation here:

Found at a dominos by u/Guilty_Sympathy_496 in electricians

Mostly, installing a shunt trip relay requires that the breaker and the shunt be from the same maker. Also, not all breaker models are compatible with this accessory.

Once you’re sure that your system can take a shunt trip accessory, installation is pretty much straightforward. You can watch this video by Aaron CBIONE for some tutorials.

Note: Every circuit breaker comes with different instructions. It would depend on the brand and model of the breaker .

However, the critical part of every installation is that you need to connect the shunt to your sensor. You may need a shunt trip breaker diagram as a reference to ensure correct installation.

Also, check the brand and model of your breaker before proceeding with the installation. Some makers only allow a factory install of the shunt trip and other accessories. DIY installation may void the warranty of your breakers. It’s best to read up on the manual or consult an electrical professional before making any changes.

What is a shunt trip breaker? The shunt trip is an optional accessory for a circuit breaker for added protection to your system. It is designed to connect to a secondary sensor. It will trip the breaker automatically if the sensor is triggered. It can also be activated via a remote switch that you can install.

Do you think that a circuit breaker is enough to protect your investment? Or do you want an additional layer of protection for your electrical circuit? If you’re not decided yet, reach out to me in the comments section below, and I will be happy to help you.

I am Andrew Wright. With 8 years of experience designing, installing, and maintaining electrical power systems. I love my job, and I have always wanted to offer others the necessary help so they can take care of their houses.

What is a Shunt Trip?

How To Connect a ShuntTrip?

You Might Also Like

8 comments:.

This comment has been removed by the author.

The information you have published here is really awesome, as it contains some great knowledge which is very essential for me. Thanks for posting it. Smoke Detector Alarm

It is a proficient article that you have shared here about electrical contractors in penzance I got some unique and valuable information from your article. Thankful to you for sharing this article here.

I generally check this kind of article and I found your article which is related to my interest. Genuinely it is good and instructive information. Thankful to you for sharing an article like this testing and tagging Melbourne

Cool stuff you have got and you keep update all of us. Electrical Contractor

Pretty good post. I just stumbled upon your blog and wanted to say that I have really enjoyed reading your blog posts. Any way I'll be subscribing to your feed and I hope you post again soon. Big thanks for the useful info. appliance installation and configuration

You have worked nicely with your insights that makes our work easy. The information you have provided is really factual and significant for us. Keep sharing these types of article, Thank you. Commercial Electrical Contractors Oregon

Follow Us On Facebook

Latest Post

Green electronics: sustainable pcb manufacturing practices.

Popular Topics

Voltage drop calculation based on national electrical code.

How To Prepare Schedule of Loads

How to Calculate Voltage Drop of Distributed Loads

How to Perform Coordination Study of OCPD and Cable in Electrical Design

What is the Importance of X/R Ratio?

How to Calculate Transformer Voltage Drop

What is SELV and PELV Circuits?

Types and Classes of Current Transformers According to IEC 60441

What are the Important Characteristics of SF6 Circuit Breakers?

Motor Circuit Branch Circuit Protection According to NEC 430.52

• Semiconductors
• $2 for 1-8 layer PCBs

What Is A Shunt Trip Breaker & How Does It Work? Detailed Guide

Hello readers welcome to the new post. In this post, we will learn What Is A Shunt Trip Breaker & How Does It Work. The shunt trip breaker is a combination of a shunt trip accessory and a main circuit breaker. it connects to the main breaker for the protection of the electrical system. it also added security to the system since it manually or automatically cut the supply in the circuit. In this post, we will discuss the all details shunt trip breaker and other parameters. So let’s get started What is a shunt trip

Table of Contents

What is a Shunt Trip Breaker?

If the circuit breaker trips it finds faults condition and automatically shuts off the current flow to prevent the circuit from overheating.  The shunt trip breaker is an optional device for a circuit breaker that helps to trip the breaker remotely in any instant or automatically in case of surge saving any damage and instrument damage.

There are 2 main types of shunt trip breakers first one is manual and the second one is automatic.

Manual witches help to off the breaker externally with the use of the remote button. Automatic switch off power when detecting surges from the external power supply.

 How Does a Shunt Trip Breaker Work?

Normally the current passes through the circuit breaker. But if these currents become high surges, the larger surge of power changes the electromagnet below the breaker switch, tripping the cutting power and switch.

The shunt trip breaker offers extra techniques to charge the electromagnet and trip switch, helping remote or automatic power shutoff. Some hunt trips are connected to an external power supply.  When power surges get that source, signal flow from shunt trip to the breaker, mechanical cutting power.

The shunt trip can make a connection with the remote switch outside the building. Pushing the button on the switch sends a surge through shunt trip wiring and off the power.

 Components of  Shunt Trip Breaker

Read more  Top Reasons Why Electric Outlet Stopped Working Breaker Not Tripped?

A shunt trip breaker comes with differnt components:

• The frame of the shunt trip circuit breaker works as an external protective housing and covers all inner components. it is made with the use of durable materials like metallic that help to avoid damage to sensitive inner circuits.
• Contacts are the main part of the circuit breaker that carries electric current. in a shunt trip circuit breaker, there are two types of contacts, main contacts, and auxiliary contacts. The main contact is used for normal power transmission, and auxiliary contacts are used for connecting the external control system

Operating Mechanism:

• The working phenomena in shunt trip circuit breakers help to open and close contacts. it comes with latch releases and trip units. The latch releases are used for maintaining contacts in the closed position until the trip mechanism works. The trip unit detects abnormal electrical conditions and starts the tripping process.

Electromagnet:

• At the core of the shunt trip circuit breaker electromagnet exists, which is important for working. If the external signal gets, the electromagnet activates and produces a magnetic field. This field work on latch releases resulted to open circuit breaker contacts.
• It is the main part of the shunt trip breaker that operates uniformly with an electromagnet. its working is to get an external signal and convert into electrical energy. this energy is used to producing the field needed for tripping breaker.

Why Are Shunt Trip Breakers Important?

irrespective optional nature of the shunt trip breaker, it can be an important safety instrument in a power system. As a result, many engineers use this breaker as a layer of security since they save damage during power surges.

This breaker is good for many fonts but it’s commonly used during fire. By turning off power if a fire breaks out, the electrical hazard is no main risk. Some connections shunt trip to smoke alarm in homes, for power automatically off when detector trigger alarm. It not be good option, since in some conditions smoke alarm gets off due to steam from the shower of smoke from the kitchen

 Applications of Shunt Trip Breakers

• In commercial buildings like offices, and shopping malls, shunt trip circuit breakers are connected to ensure sure safety of many components and protect them from electrical faults. It also connected with a building management system to help remote operations
• Industrial facilities mostly work with high-power machines, so electrical safety is needed. Shunt trip breakers are used in such facilities for protection from faults and to reduce the chances of electrical accidents.
• Laboratories and research facilities also use these breakers since they are equipped with sensitive devices.
• There is a need for a regular power supply for critical patient care. Shunt trip breakers help to make sure emergency power is constant without any interruption.
• Data centers come with computing devices and sensitive data. Shunt trip breakers are used to protect these facilities from electrical hazards.

 Advantages of Shunt Trip Breakers

• The main benefit of a shunt breaker is that it can remotely shut off in case of any fault. It quickly works and disconnects power in fire which helps to avoid damage in the home and protects people.
• These devices also increase safety levels and security by automating off power to the circuit if there is any fault. it helps to save electrical fires and any other damage.
• The shunt breaker is easily connected and confined with a power system, so it is easy to install the device in the building.
• The shunt breaker is a less cost solution for safety measures in buildings and industries. it is less costly to buy and connect and helps to save homes and buildings in the result of high fault.
• Shunt breakers support many electrical systems and devices so it is versatile devices that are used for the protection of circuits.

 Comparison with Other Circuit Protection Devices

Shunt trip breakers vs. standard circuit breakers.

The basic difference between shunt trip breakers and regular circuit breakers is their function. Regular breakers are manually operated and based on a user-to-flip switch if requried or on current overloading that triggers the unlatching process.

While shunt trip breaker provdies more layers of controls. it can be triggered remotely with the use of a switch or automated system. These features allow them to immediately off power in case of fault.

Shunt trip breakers vs. ground fault circuit interrupters (GFCIs)

GFCI monitors equality between L1 and L2, if there is more than predefined difference in trips. The shunt breaker is a combination type device that combines in regular breaker with its regular function trip it has a remote control to trip breaker.

Ground fault breakers monitor current on neutral wire flowing back to the neutral bar, the four to six-milliampere different trip breakers, and shunt trip breakers can tripled remotely from other switches or points. In industrial uses, it is used to shut off in emergency condtion, when access to an electrical panel is difficult.

Shunt trip breakers vs. arc fault circuit interrupters (AFCIs)

Shunt Trip Breaker

• It used for overloading and short protection
• its working principle is based on thermal magnetic trip
• Its detection range is 10 to 1000A
• its response time is 10 to 20 milliseconds
• It used for arc fault protections
• It works based on a microprocessor for detecting arcing
• The detection range is 5 to 6000 A
• Response time is 10 to 40 milliseconds

What Are 3 Types Of Shunt Trip Breakers?

• Standard breakers
• Arc fault circuit interrupter circuit breakers

Shunt trip breaker wiring

Follow these steps for shunt trip breaker wiring.

• First of all, see the diagram shown below.
• Arrange requried tools and materials like wire strippers, nuts, and voltage tester.
• Remove the power and wire that shunt the breaker according to instructions.
• Again connect power to the circuit and test breaker to check that working well

Diagram of Shunt Trip Breaker Wiring Diagram

WHICH TYPE OF SHUNT TRIP BREAKER TO USE?

The manual breaker is best to use for small buildings or conditions where any technical staff is available to reset the breaker,. The automatic breaker can be best for larger-size buildings or conditions where there is no option for staff for breaker resetting.

it is also preferred for trigger shunt trip breakers at a distance or remotely. These relays are connected to fire alarm systems and can send a signal to the breaker for tripping if there is any fault.

Read more  How Many Outlets on a 15 Amp Circuit Breaker?

How Many Outlets on a 15 Amp Circuit Breaker?

60 Amp Wire Size – Which AWG is Best for 60 Amp Breaker

Difference Between a Single and Double Pole Breaker

Where is the Doorbell Breaker Located? Easy Way to Findout

Difference Between Fuse and Circuit Breaker

How does a shunt trip breaker work?

The shunt trip is a device in the circuit breaker that mechanically trips the breaker when power is given to shunt trip terminals. Power for shunt trip does not come in breakers, so it provided from an external source

How is a shunt trip breaker wiring?

Make the connection of accurate voltage (120V to 240V for the -1021 suffix) with 2 terminals on the shunt trip. Land with a leg from source contact on one terminal and a neutral wire. (L2 , X2 ) to the other terminal

What is the purpose of a shunt with a relay?

Shunt relays are used to bypass normal controls like switches , dimmers, or panel-mounted relays when employed on an emergency circuit.

What is shunt trip and under voltage?

The shunt trip coil is connected to the breaker to offer a remote trip of the breaker but Undervoltage or no voltae coil is connected to offer automatic tripping when power losses occur or when there is a major voltage dip.

Where is shunt trip used?

The shunt trip helps to remotely and fastly turn off the breaker when needed especially in conditions where safety and speed is important, like during a fire or when there is needed to isolate certain areas of the electrical system without physically going to the breaker

What is the difference between shunt and resistance?

The shunt is an electrical device that produces a low resistance path for current. It helps current to flow to another point in cirucit. Shunts are also referred to as ammeter shunts or current shunt resistors.

What is the purpose of a shunt breaker?

its main purpose is to remotely and fastly turn off  circuit breaker when necessary

Is the shunt resistor AC or DC?

Shunt provdies DC mV signal for driving moving coil ammeter, overlading protection, and control units for high amper range.

Where are shunt trip breakers required?

These breakers are used in commercial  and industrial buildings, also for facilities where safety is a top priority

Why is it called a shunt resistor?

In older circuits, resistors connected in parallel to the ammeter as shunts for expanding the current measuring range called shunt resistors. but now resist used for detection circuit current  collectively referred to as shunt resistors

Why is low resistance called shunt?

When a resistor is connected with another resistor of low value, then the equivalent resistance is less the lowest resistor, that is shunt resistors.

What is another name for a shunt resistor?

Shunts also called ammeter shunts  or current shunt resistors.

What is a unit of shunt resistance?

The unit of shunt resistance is ohm (Ω).

What is shunt resistance formula?

The shunt resistance formula is:

• Rs is the shunt resistance
• V is the voltage of the shunt resistor
• I is the current passing through the shunt resistor

What is shunt release in a circuit breaker?

The shunt releases is opening coil plus release. Thermal trips and electromagnetic trips also use trip units. use a certain voltage to shunt trip the coil, and the breaker will trip and open.

What is the difference between a shunt trip and series trip?

What are the different types of shunt trip breakers, does a shunt trip breaker need a neutral, what is the difference between shunt trip and a shunt close.

When used as a shunt trip the coils trip breaker when a rated voltage is given. When used as shunt close, coils closes breaker when voltae is provided

Share this:

Wholesale PCBs SMT Stencil & PCBA Service Provider

Special offer:$2 for 1-8 layer PCBs 

Sign Up & Get 54$ Coupon

Author:  Scott Spencer

I am professional content writer have professional degree in engineering. I have worked in different famous companies and also providing technical and seo based services clients all over the world. With that i am sharing my knowledge to engineering and technical students and new learners to enhance their learning and get new ideas in technical fields. Follow him on Twitter and Facebook .

Related Posts

Designing High-Frequency PCBs for RF and Microwave Components June 12, 2024

Can 3D printers create complex structures? June 6, 2024

What are Alkaline Batteries? A Buying Guide  June 4, 2024

What is a Waterjet Cutting Machine and How Does it Work May 29, 2024

Why Should Industries Choose Oil-Free Air Compressors? May 14, 2024

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Post comment

What Is A Shunt Trip Breaker & How Does It Works?

Have you ever heard about this kind of breaker? And “what a shunt trip breaker is” usually appears when you hear about this for the first time.

Keep this article to get the best answer to the question above, its primary use, and when it is required.

Table of Contents

What Is A Shunt Trip Circuit Breaker?

A circuit breaker “trips” once it detects a problem, cutting off power to the outlet or appliance in question and protecting the wire from burning.

An optional attachment to any circuit breaker, a shunt trip breaker allows for the breaker to be shut off remotely at any moment or immediately in the event of a power excess. Damage to or injury from equipment may be avoided in a crisis if this is in place.

There are two distinct categories for shunt trip breakers, automatic and manual. The breaker may be turned off from the exterior of the building through a remote button using manual switches. Conversely, mechanical switches interrupt power flow when they identify a surge coming from the grid.

How Does A Shunt Trip Breaker Work?

Electrical impulses often pass through your circuit breaker without being altered. Nevertheless, if these currents reach unsafe levels, an additional surge of energy will charge a magnet located just below the primary breaker switch. This will cause the switch to trip, resulting in the power being cut off.

Adding a shunt trip breaker provides an additional method to charge the magnets and trip the switches, which makes it possible to turn off the electricity remotely or automatically.

Some of the shunt trips are powered by an external source. When a power surge occurs at this source, a notification is delivered from the shunt trip towards the breaker, which causes the breaker to stop the power automatically.

Connecting to a remote switch that is situated outside the building may also be accomplished with the help of a shunt trip. The current is cut off when the user clicks a button on that switch, which causes an electrical surge to be sent via the shunt trip circuit.

Even though shunt trip breakers are optional in residences, many people put them there out of caution. But, these devices are also often used in businesses that use expensive industrial machinery or electronic wiring that are susceptible to being destroyed in the event of a power surge.

Why Are Shunt Trip Breakers Important?

In an unexpected power outage, you may give yourself an additional level of peace of mind by installing a shunt trip breaker in your house. Because of this, you will not risk injuring yourself or creating any electrical harm.

If there is a fire, one of the most common uses for shunt trips is to switch off any electrical equipment that could be present. For example, when a shunt trip is connected to a fire detection system, the power may be immediately turned off once the smoke detector senses a fire. This allows for eliminating any potential electrical hazards that the fire may cause.

If your smoke detector is connected to your home’s sprinkler system, installing a shunt trip is essential. This device might turn off your power as quickly as the smoke detector triggers the sprinkler, reducing the real damage to your electronic devices.

Where Do People Most Often Use Shunt Trip Breakers?

Shunt trips reduce power through additional sensors, not simply heat activation. For a household electrical system, this circuit breaker attachment is optional.

However, it’s advised for safety. Industrial equipment makes this particularly true. It may also shut off your main breaker manually in an emergency.

Before beginning the implementation of a shunt trip, take into consideration the associated costs and the system. It is possible that the breaker panel and the circuit breakers will need to be replaced if shunt trips are not supported. It’s also possible that a new cable will be required to connect the remote emergency switch to the breaker box.

In most business kitchens, elevators, and offices, shunt trip breakers are an essential safety device. ASME A17.1 is the standard that must be adhered to for elevators and escalators, while ANSI/ASME CSD-1 is the standard that must be attached to commercial kitchens. ASME regulations mandate these controls and safety standards.

Installing A Shunt Trip Accessory to a Breaker

Shunt trip relays can only be installed with breakers and shunts made by the same company. Plus, not all circuit-breaker models can use this part.

Adding a shunt trip connection is easy after establishing that your system is functioning. Watch this video from Schneider Electric for some guidelines:

Each circuit breaker has its instructions, so please follow them carefully. In addition, the make and model of the breaker are relevant.

The most critical step when setting up a sensor is to attach the shunt. If you want to be sure your shunt trip breaker is installed correctly, a shunt trip breaker diagram may be required.

It’s essential to verify the model and manufacturer of your breaker before commencing the installation. The manufacturer in some instances can only install the shunt trip and any other components. If you install your circuit breakers on your own, you might void the warranty. If you want to make alterations, you need either consult the manual or an electrician.

Here are some questions and answers related to the shunt trip breaker:

Does Shunt Trip Breaker Work?

Shunt trip breakers serve a vital purpose in the electrical system as a whole by providing an extra layer of protection for the circuits they are part of. In addition, they cut off electricity in times of crisis to avoid harm and damage to equipment.

What Are 3 Types Of Shunt Trip Breakers?

• Standard breakers 
• Around fault circuit interrupter circuit breakers (GFCIs)
• Arc fault circuit interrupter circuit breakers 

They are the three fundamental circuit breaker types (AFCIs). And standard breakers include both single-pole and double-pole circuit breakers.

Why Is Shunt Used In MCCB?

Molded case circuit breakers (MCCBs) are often employed in electrical distribution systems to prevent overload and short circuits from damaging electrical components. In reaction to a voltage signal from the outside, the shunt release device, a built-in component of MCCB, releases the mechanism.

You have completely got the answer to what a shunt trip breaker is and understand its function. 

A circuit breaker’s shunt trip is an extra layer of safety that may be installed if desired. It’s meant to link up with another sensor. If the sensor is activated, the breaker will trip immediately. You may also set up a remote switch to turn it on and off.

• Why does my breaker keep tripping with nothing plugged in?
• Crouse hinds compatible breakers
• Challenger breaker replacement

Erik Watkins

Automotive Mechanic at PowerAll

With 7 years experience in management positions leading automotive mechanics at PowerAll, Erik Watkins wishes to share useful knowledge and information about automotive mechanical equipment.

Submit a Comment Cancel reply

Your email address will not be published. Required fields are marked *

Save my name, email, and website in this browser for the next time I comment.

Submit Comment

What Is A GFCI Outlet Receptacle? What Does It Stand For?

Gas vs. Electric Lawn Mower: Is Battery As Good As Gas?

Extension Cord Gauge/Length Chart: Amp Rating & Size

Dimmable LED Flash: LED Light Bulbs Flickering Solutions

Crouse Hinds Compatible Breakers & Replacement Chart

What Size Wire For 40 Amp Circuit Breaker?

• Electrical Repair
• Lighting Installation
• Hot Tub Wiring
• Emergency Electrical Service
• Ceiling Fan Installation
• Generator Installation
• Commercial Lighting Services
• Electrical Inspection
• What Is a Shunt Trip Breaker and How Does It Work

What Is a Shunt Trip Breaker and How Does It Work?

First things first: what is a shunt trip breaker? A shunt trip breaker is a specialized circuit breaker that is designed to remotely shut off power to a circuit in emergency situations, such as a fire or security breach. These breakers are commonly used in commercial and industrial buildings, as well as other facilities where safety is a top priority. In this article, we'll explore this type of breaker in detail and explain why hiring an  electrical services provider for a wiring shunt trip breaker is essential. 

The Many Benefits of a Shunt Breaker

Let’s recap: a shunt trip breaker is an electrical component connected to a circuit breaker and allows for remote operation through a schematic and AMP connection. Now that you know what a shunt trip circuit breaker is, it's time to move to the next part of this article: the benefits of using a shunt breaker.

• Remote Shut-Off: One of the main benefits of shunt breakers is that they can be remotely shut off in the event of an emergency. This allows them to quickly and easily disconnect power in a fire or other emergency, which can help prevent damage to the building and protect the occupants.
• Increased Safety: Besides remote shut-off, shunt trip circuit breakers provide an added level of safety and security by automatically shutting off power to a circuit in the event of an emergency. This helps prevent electrical fires and other hazards, protecting both people and property.
• Easy Installation: Shunt breakers are relatively easy to install and can be integrated into existing electrical systems, making it possible to retrofit older buildings with these devices.
• Cost-Effective: A shunt breaker is a cost-effective solution for increasing safety and security in commercial and industrial buildings. They are relatively inexpensive to purchase and install and can help prevent costly damage to the building and its contents in case of any emergency.
• Compatibility: Shunt breakers are compatible with a wide range of electrical systems and devices, making them a versatile and practical solution for increasing safety in various settings.

How Does a Shunt Trip Breaker Work?

A shunt trip breaker works by tripping the breaker when it receives a signal from an external device, such as a fire alarm or security system. This helps to prevent dangerous electrical fires or other hazards. When an emergency occurs, the external device sends a signal to the breaker, which causes the breaker to trip and open the circuit, interrupting the flow of electricity and preventing power from reaching the circuit, allowing for a quick and easy power disconnection.

Types of Shunt Trip Breakers

Now that you know the answer to "How does a shunt trip breaker work", it's time to discover about the two main types of shunt trip breakers.

• Manual Shunt Trip Breaker: This type of trip breaker requires manual intervention to reset the breaker after it has been tripped, meaning someone must physically go to the breaker and reset it after an emergency situation. This breaker is typically used in smaller residential buildings or situations where a dedicated staff member is available to reset the breaker.
• Automatic Shunt Trip Breaker: This type of breaker can automatically reset itself after being tripped and is typically used in larger buildings or in situations where there is not always someone available to reset the breaker. These breakers are often connected to fire alarm systems or other emergency management systems for auto-reset.

When is a Shunt Trip Breaker Required?

If you're wondering when is a shunt trip breaker required, know that it is required in any electrical system where there is a need to quickly and easily shut off power in the event of an emergency, such as a fire or security breach. Continue reading as we describe the importance of using shunt trip breakers and how to figure out which one you need to use for your building or facility.

The Importance of Using a Shunt Trip Breaker

• Shunt trip breakers automatically shut off power in emergencies.
• They prevent dangerous electrical fires and other hazards.
• They allow for quick and easy power disconnection in emergencies.
• They are easy to install and cost-effective solutions for increasing safety.
• They can be connected to fire alarm and emergency management systems.
• They ensure that the electrical system is in compliance with safety regulations.
• They are a versatile and practical solution for increasing safety in various settings.

Which Type of Shunt Trip Breaker to Use?

A manual breaker may be appropriate for a smaller building or in situations with a dedicated staff member available to reset the breaker, while an automatic breaker may be more appropriate for a larger building or in situations where someone is not always available to reset the breaker. Another option to consider is the use of a shunt trip relay, which can be used to trigger a shunt trip breaker remotely. These relays are typically connected to fire alarm systems or other emergency management systems and can send a signal to the breaker to trip it when an emergency occurs.

Shunt Trip Breaker Wiring Diagram

If you're wondering how to wire a shunt trip breaker, know that wiring can seem like a daunting task, but with the right knowledge and tools, it can be done relatively easily. Follow the steps below:

• Obtain a "How to wire a shunt trip breaker wiring diagram." (Check above).
• Gather necessary tools and materials such as wire strippers, nuts, and a voltage tester.
• Disconnect the power and wire the shunt breaker according to the instructions provided.
• Reconnect power to the circuit and test the breaker to ensure it works properly.

It is important to pay close attention to the diagram and follow the instructions carefully. This will ensure that the breaker is wired correctly and functions. Once the wiring is complete, you can reconnect the power to the circuit and test the breaker to ensure that it is working properly. It is always better to consult with a professional if you aren't confident about the wiring process. 

What Does a Shunt Trip Breaker Do?

We hope by now you know what does a shunt trip breaker do, but here's a recap: a shunt trip breaker is a specialized circuit breaker that protects your house electrical systems from damage or hazards in emergencies. It works by tripping the breaker when it receives a signal from an external device, such as a fire alarm or security system, preventing dangerous electrical fires or other regular hazards.

Nevertheless, it is important to understand what does shunt mean in electrical terms and the role of electrical shunt trip breakers in commercial and industrial settings. Finally, to determine the appropriate type of breaker for your specific needs, it is best to consult an electrical services provider. If you're based in Colorado or surrounding areas, McCarrick Electric has got you covered.

Superior Electrical Solutions in Colorado 

At McCarrick Electric, we have 25+ years of experience providing top-quality electrical services in Colorado. We value all of our customers, and that's why we offer a 15% discount for first-time residential clients and veterans. We take pride in our integrity, attention to detail, and cost-effectiveness. For more information, connect with us via our contact form or give us a call.

Latest Blog Entries

What to Do If Your Circuit Breaker Keeps Tripping?

Why Is Your Breaker Box Outside House? Here Are the Reasons

Why Won’t My GFCI Outlet Reset? How to Troubleshoot a GFCI Outlet

5 Ways to Prevent Short Circuits

Home » circuit breaker » Shunt trip breaker

Shunt Trip Breaker: How It Works to Trip a Circuit Breaker.

While circuit breakers protect appliances from power surges , shunt trip breakers add more protection to our electrical system and equipment .

If you are looking to add additional protection to your home circuit, or even trip your breaker remotely from your comfort zone, why not shop for a shunt trip circuit breaker?

Table of Contents

What is a shunt trip breaker?

A shunt trip device is an optional accessory for breakers that allows you to trip a circuit breaker with a remote, or automatically trip the switch during electrical surge or short circuit .

Shunt trip breakers are mostly used in commercial and industrial applications to enhance safety and protection of electrical appliances.

Types of shunt trip breakers

There are two main types of shunt trip circuit breakers they include.

• Automatic shunt trip breakers: These breakers trip automatically when they detect an electrical fault such as an overcurrent or a fire alarm.
• Manual shunt trip breakers:  These breakers are tripped manually by pressing the remote button.

How the shunt trip circuit breakers work

A shunt trip breaker works like other circuit breakers . However, it comes with a solenoid coil which is connected to a separate control circuit. 

When the control circuit is energized due to electrical fault or overload, it creates a magnetic field around the solenoid coil, which pulls a plunger inward.

This plunger is connected to the tripping mechanism of the circuit breaker. So when it is pulled inward, it trips the breaker and cuts off the power source.

Alternatively, a shunt trip breaker can also work with a remote control so you can trip the breaker remotely when there are electrical hazards

Where are shunt trips required

Shunt trip circuit breakers are used in various applications such as

• Industrial machines to protect it from damages that may arise from electrical faults.
• Fire protection systems to automatically shut off electrical power in the event of a fire outbreak.
• in commercial buildings for additional protection against electrical damage.
• hospitals and healthcare facilities to protect hospital equipment from electrical damage.

Advantages of using a shunt trip breaker

There are several advantages to using a shunt trip devices, these include:

• Enhanced Safety: It provides an additional layer of safety by quickly tripping the main breaker in the event of a fault or overload, preventing potential damage to electrical equipment.
• Remote tripping capability: A shunt trip breaker usually comes with a remote control to enable you to turn off the breaker at any needed time.
• Protection of sensitive equipment: It can help protect sensitive electrical equipment from power surges caused by overload or faults, ensuring the durability of the equipment.

Shunt trip breaker wiring

Before you wire a shunt trip, there are some things you will need to know.

Shunt trip is an accessory and is not compatible with all breakers. Some breakers come with an in-built shunt trip, others require specific models, or to be installed in the factory. Therefore, it is necessary that you evaluate all these before the wiring .

If the breaker is compatible with the shunt trip device, you can then follow this wiring diagram to install it.

Based on the MCCB shunt trip breaker wiring diagram above, the 3-phase 4-wire system from supply is connected to the mccb breaker .

The neutral wire is connected to the shunt coil, and the control line wires to the EPO button. 

Difference between a shunt breaker and a GFCI 

A shunt trip and a ground fault circuit interrupters (GFCI ) are both electrical devices , however, they are designed to work in different ways and for different purposes.

Below are their major differences.

When to call an electrician

If you have any issues with your electrical system, or went us to help you with a quotation or any wiring advice, contact us as we are here for you.

About mariaelectricals

Hi, I am Emmanuel Nwankwo, a commercial electrician and the founder of mariaelectricals.com . I established this blog to share my decades of work experience in electrical installations and repairs.

Please leave this field empty.

• All Products
• Cutler Hammer
• General Electric
• Commercial Circuit Breaker
• Residential
• Circuit Breaker Lugs
• Circuit Breaker Terminals
• Circuit Breaker Box
• Filler Plates
• Auxiliary Switches

What Is a Shunt Trip Breaker

22 December, 2021

What Is a Shunt Trip Breaker and How Does It Work?

If you’re looking for an easy way to shut off the electrical supply in your circuit, installing a shunt trip breaker may be worthwhile. Shunt trips can add additional protection to your electrical system to prevent short circuits and injury during a disaster in your home, such as a fire. 

Read on to learn the answers to “What is a shunt trip breaker?” and “What is the purpose of a shunt trip breaker?”’ 

What Is a Shunt Trip Circuit Breaker?

When a circuit breaker “trips,” it detects a fault condition and automatically shuts off its electrical flow to prevent the wiring from overheating. 

A shunt trip breaker is an optional accessory for your circuit breaker that can allow you to trip the breaker remotely at any time or automatically during a surge, preventing injuries and equipment damage during emergencies. 

There are two main types of shunt trip breakers: automatic and manual. Manual switches allow you to turn off the breaker outside the building using a remote button. Meanwhile, automatic switches shut off power as soon as they detect a surge from an external power source. 

How Does a Shunt Trip Breaker Exactly Work?

Typically, electrical currents travel through your house’s circuit breaker unchanged. However, when these currents surge too high, the extra surge of power charges an electromagnet beneath the main breaker switch, tripping the switch and cutting power. 

A shunt trip breaker provides an additional method to charge the electromagnet and trip the switch, allowing for a remote or automatic power shutoff. 

Some shunt trips connect to an external power source. Anytime a power surge reaches this source, a signal travels from the shunt trip to the breaker, mechanically cutting the power. 

Alternatively, a shunt trip can connect to a remote switch outside the building. Pressing a button on this switch sends an electrical surge through the shunt trip wiring and shuts off the power that way. 

While shunt trip breakers are not required in homes, many homeowners install them as a safety precaution. However, these devices are also common in businesses that use industrial machinery or expensive electrical systems that could experience damage during a power surge. 

Why Are Shunt Trip Breakers Important?

You can use a shunt trip breaker within your home to create an additional way to shut off your house’s electrical current during an emergency, preventing injury or electrical damage. 

One of the most common ways people use shunt trips is to shut off electrical equipment during a fire. Connecting the shunt trip to a smoke alarm can automatically shut off electricity as soon as the smoke detector triggers an alarm, preventing electrical hazards from the fire. 

Installing a shunt trip may be especially important if your smoke detector connects to a sprinkler system. This device can shut down your electrical power as soon as the smoke detector triggers the sprinklers, reducing the risk of electrocution and minimizing damage to your electrical equipment. 

Installing a shunt trip breaker is a quick and easy safety precaution that could prevent injury and expensive electrical damage down the line. Now that you know the answer to “what is a shunt trip breaker used for?” browse our Electrical Supply Distribution inventory of shunt trips today to discover the perfect shunt trip breaker for your home.

Share This Post

Related blog posts.

Difference Between A Circuit Breaker And A Fuse

How to Replace a Circuit Breaker

Are GFCI Outlets Required in Older Homes?

Tell Us About Your Project

First Name *

Last Name *

Please leave this field empty. Please leave this field empty.

Phone Number *

Description

Send Us The Picture Of Your Project

• 800.497.6255

Hours of Operation

• Sign In Create
• Relectric Account Benefits
• Expedite your online checkout
• Store billing and shipping info
• Track your orders

Shunt Trips – Shunt Trip Circuit Breakers

A shunt trip is an optional accessory device that electricians and/or manufacturers install to a circuit breaker. This is known as a shunt trip circuit breaker. Some circuit breakers allow shunt trip kits to be installable in the field. Others require factory installation when ordering the circuit breaker. You can check your specific type of circuit breaker for the ac and dc shunt trip voltage ratings and how to install these shunt trips .

So How Does a Shunt Trip Breaker Work Exactly?

Well, we know that circuit breakers trip automatically when there’s an electrical surge (current exceeds the specified limit). This is still true for circuit breakers with a shunt trip. The first two contacts of a shunt trip breaker are connected by a metallic strip on a switch and an electromagnet placed underneath the switch. Electricity flows through the metallic strip under normal conditions. But when a surge occurs, the excess power charges the electromagnet which trips the switch and cuts the connection and power. In addition to this normal tripping mechanism, a shunt trip breaker has an external power source that powers it. This external system wires to the electromagnet in the circuit breaker, and this connection can send an electrical signal that can also charge the electromagnet and trip the switch.

Why are Shunt Trip Breakers Important?

Shunt trip breakers essentially provide an off switch remotely or a direct link to a system outside the main breaker. Remote manual switches allow for human control while direct link automatically shuts off the breaker.

An example of a direct link is safety systems such as smoke detectors and fire emergency button/switch are some of examples of an external source. For instance, when smoke triggers a smoke detector, the breaker trips automatically. This cuts the power to electrical equipment at the same time the smoke detector triggers the sprinkler. The immediate break in power minimizes electrical damage, and prevents short circuits and electrocution risk . On the other hand, shunt trip breakers can be remotely shut off, for instance when there is fire damage- someone can turn off power to another building via a remote manual switch. Shunt trip breakers are important safety features in preventing damage to electrical equipment as well as injury to people.

Overall, shunt trip breakers add additional safety features to breakers and ultimately play an important role in the electrical system. They shut off electrical power during emergencies and serve to prevent damage to equipment and injury to people.

The Enlightened Mindset

Exploring the World of Knowledge and Understanding

Welcome to the world's first fully AI generated website!

Understanding Shunt Trip: What it is, How to Use it & Troubleshooting Tips

By Happy Sharer

Introduction

A shunt trip is an electrical circuit designed to shut down equipment or activate alarms in the event of an emergency. It’s an important safety feature that helps protect people and property from potential harm. In this article, we’ll explore what a shunt trip is, how it works, and the advantages of installing one.

Exploring the Basics of a Shunt Trip

A shunt trip is a type of circuit breaker, which is an electrical device designed to shut off the power supply when a fault is detected. The circuit breaker is connected to a sensing device, like a pressure switch or smoke detector, which detects any changes in the environment. If a hazard is detected, the circuit breaker will be triggered, shutting off the power supply.

The shunt trip circuit is made up of three components: a sensing device, a control relay, and a circuit breaker. The sensing device is installed near the equipment being monitored and detects any changes in the environment. When the sensing device detects a hazardous condition, it sends a signal to the control relay, which then activates the circuit breaker, stopping the flow of electricity.

The shunt trip circuit is an important safety feature that can help prevent serious accidents and injuries. According to a study by the National Institute for Occupational Safety and Health (NIOSH), “the use of shunt trip circuit breakers can help reduce the risk of electrical shock and other hazards in the workplace.”

The Advantages of Installing a Shunt Trip

Installing a shunt trip circuit can provide numerous benefits, including improved safety, increased efficiency, and cost savings. Here are some of the most common uses for a shunt trip circuit:

• Safety: A shunt trip circuit can be used to shut down equipment in the event of an emergency, helping to prevent serious accidents and injuries.
• Efficiency: By automatically shutting down equipment when a hazardous condition is detected, a shunt trip circuit can help reduce downtime and improve efficiency.
• Cost Savings: Installing a shunt trip circuit can help save money by reducing the need for manual inspections and maintenance.

There are several different types of shunt trips available, depending on the application. Common types include magnetic shunt trips, thermal overloads, and ground fault circuit interrupters (GFCIs). Understanding the differences between these types of shunt trips can help you choose the right one for your needs.

Troubleshooting a Shunt Trip Circuit

When troubleshooting a shunt trip circuit, it’s important to identify any potential faults or issues. Common problems with shunt trip circuits include faulty wiring, incorrect settings, and damaged components. Here are some tips for troubleshooting a shunt trip circuit:

• Check the Wiring: Check all the wiring connections to make sure they are secure and in good condition.
• Check the Settings: Make sure the shunt trip circuit is set correctly according to the manufacturer’s instructions.
• Check the Components: Make sure all components are in good working order and replace any damaged parts.

A shunt trip is an important safety feature that can help protect people and property from potential harm. It’s a type of circuit breaker that can be used to shut down equipment or activate alarms in the event of an emergency. Installing a shunt trip circuit can provide numerous benefits, including improved safety, increased efficiency, and cost savings. When troubleshooting a shunt trip circuit, it’s important to check the wiring, settings, and components to identify any potential faults or issues.

In summary, a shunt trip is a valuable safety feature that can help reduce the risk of accidents and injuries. Understanding how it works and how to troubleshoot it can help ensure it functions properly and provides maximum protection.

(Note: Is this article not meeting your expectations? Do you have knowledge or insights to share? Unlock new opportunities and expand your reach by joining our authors team. Click Registration to join us and share your expertise with our readers.)

Hi, I'm Happy Sharer and I love sharing interesting and useful knowledge with others. I have a passion for learning and enjoy explaining complex concepts in a simple way.

Related Post

Exploring japan: a comprehensive guide for your memorable journey, your ultimate guide to packing for a perfect trip to hawaii, the ultimate packing checklist: essentials for a week-long work trip, leave a reply cancel reply.

Your email address will not be published. Required fields are marked *

Expert Guide: Removing Gel Nail Polish at Home Safely

Trading crypto in bull and bear markets: a comprehensive examination of the differences, making croatia travel arrangements, make their day extra special: celebrate with a customized cake.

Login/Register

Welcome back! Access your account here.

Sign up to an account that suits your needs and take advantage of a customised Clipsal experience.

Frequently asked questions

How does a shunt trip work to trip a circuit breaker.

26 May 2022

• Video Learning
• Capabilities
• Air Breakers
• Insulated Case
• Switchgear Repair
• Switchgear Parts
• Vacuum Breakers
• Switchboard Manufacturing
• Power Panelboards
• Switchgear Rental
• Power Transformer Rental
• Powder Coating
• Replacement Parts
• Molded Case
• Air Contactors
• Vacuum Contactors
• Switchgear Safety
• Testing Switchgear
• Content Library
• 24/7 Customer Service
• Credit Application
• Switchgear Project Gallery
• Social Archives

Shunt Trip Parts In Stock for Remote Tripping Your Circuit Breakers

Remotely trip and disconnect power to a specific circuit, safely and remotely trip circuit breakers.

A shunt trip is an electrical circuit’s equivalent of a heroic maneuver. Consider a circuit breaker to be a guard for your electrical system. Its purpose is to keep things from going crazy if there is too much power present.

Enter the shunt trip, which functions similarly to the guard’s remote control. When you push a button on this remote, a particular coil inside it becomes energized and generates a magnetic field. This magnetic field communicates with the circuit breaker and nudges it, saying, “Hey, time to take a break!”

The circuit breaker receives the signal and says, “Alrighty, shutting down now!” It just opens its connections and cuts off the electricity flow. This comes in handy when you need to rapidly turn off the power from a distance. Consider it a safety switch that you can activate even if you aren’t directly next to the breaker.

In other words, a shunt trip is a remote-controlled means to cause a circuit breaker to trip by utilizing a magnetic magic trick. It’s useful for keeping things secure without having to go around flipping switches.

Are you looking for Shunt Trip parts? We made a video inside our Switchgear and Circuit Breaker Parts Warehouse. This particular video is about Siemens/Allis Chalmers MA Series circuit breaker parts. Below is a little more about a shunt trip for a MA-this breaker’s specifications.

Voltage Rating: The “4.76KV” indicates the voltage rating of the circuit breaker. It suggests that the breaker is designed to handle systems with a voltage of 4.76 kilovolts (kV).

Current Rating: The “1200A” indicates the current rating of the circuit breaker. It suggests that the breaker can carry a continuous current of up to 1200 amperes without tripping.

Operating Mechanism: The “EO/DO” likely refers to the operating mechanisms of the circuit breaker. “EO” stands for “Electrical Operation,” meaning the breaker can be controlled remotely using an electrical signal. “DO” stands for “Manual Operation,” indicating that there’s a manual mechanism to operate the breaker as well.

This video is about Siemens/Allis Chalmers MA Series circuit breaker parts. Below is a little more about this breaker’s specifications. Voltage Rating: The “4.76KV” indicates the voltage rating of the circuit breaker. It suggests that the breaker is designed to handle systems with a voltage of 4.76 kilovolts (kV).

Current Rating: The “1200A” indicates the current rating of the circuit breaker. It suggests that the breaker can carry a continuous current of up to 1200 amperes without tripping. Operating Mechanism: The “EO/DO” likely refers to the operating mechanisms of the circuit breaker. “EO” stands for “Electrical Operation,” meaning the breaker can be controlled remotely using an electrical signal. “DO” stands for “Manual Operation,” indicating that there’s a manual mechanism to operate the breaker as well.

Interrupting Capacity: This specification refers to the maximum fault current that the circuit breaker can safely interrupt without causing damage. It’s crucial for ensuring the protection of the electrical system. Tripping Characteristics: Different circuit breakers can have various tripping characteristics, such as instantaneous, short-time delay, and long-time delay trips. These settings determine how quickly the breaker will trip in response to different levels of fault currents.

Physical Dimensions: The physical size and dimensions of the circuit breaker are important to ensure that it fits within the designated switchgear or electrical enclosure. Environmental Ratings: These ratings indicate the operating conditions the circuit breaker is designed for. This includes factors such as temperature range, humidity, altitude, and indoor/outdoor usage.

Accessories: Circuit breakers can come with various accessories like shunt trips, auxiliary switches, ground fault protection, and more. These accessories enhance the functionality and safety of the breaker. Standards Compliance: The circuit breaker should meet relevant industry standards, such as those set by organizations like ANSI, IEC, or IEEE.

Documentation: The manufacturer should provide detailed documentation that includes installation instructions, operation guidelines, maintenance procedures, and troubleshooting information. For accurate and updated information on the MA-250C Allis-Chalmers 1200A 4.76KV EO/DO Air Circuit Breaker, reach out to the manufacturer directly or consulting official product manuals and specifications.

BCS Switchgear is an industry leader in new and obsolete electrical control and distribution equipment. Since 1997, BCS has been servicing customers to extend electrical life of low and medium voltage electrical power equipment.

Cody can be reached by email: [email protected]

• Privacy Policy
• Terms & Conditions

888- 599- 0486

GET A QUOTE

Please fill out the appropriate information below.

Name: Name: Name: Message:

• Get custom product tools and services
• Access training
• Manage support cases
• Create and manage your orders (authorized partners only)

Schneider Electric USA Website

Search FAQs

What is the difference between a shunt trip and shunt close device on a masterpact breaker, released for: schneider electric usa, attachment(s).

Articles that might be helpful

Discuss this topic with experts

Start here!

Find answers now. Search for a solution on your own, or connect with one of our experts.

Contact Support

Reach out to our customer care team to receive more information, technical support, assistance with complaints and more.

Where to buy?

Easily find the nearest Schneider Electric distributor in your location.

Search topic-related frequently asked questions to find answers you need.

Contact Sales

Start your sales inquiry online and an expert will connect with you.