Honeywell MS9520/40 Voyager manual
manual Honeywell MS9520/40 Voyager
METROLOGIC INSTRUMENTS, INC.
Ms9500 voyager, single-line hand held laser scanner, installation and user's guide.
View the manual for the Honeywell MS9520/40 Voyager here, for free. This manual comes under the category barcode reader and has been rated by 4 people with an average of a 8.1. This manual is available in the following languages: English. Do you have a question about the Honeywell MS9520/40 Voyager or do you need help? Ask your question here
- Product Overview
- Scanner and Accessories
- Scanner Components
- Disconnecting/Connecting the PowerLink Cable
- Maintenance
- RS232, Laser Emulation, and Light Pen Emulation
- RS485 (Applicable for IBM® host applications.)
- Keyboard Wedge
- Stand-Alone Keyboard
- Full Speed (-40)
- Low Speed (-38)
- How to use CodeGate and the Manual Activation Mode
- Three Modes of Operation
- Free Standing Kits #46-46128
- Optional Hard Mount Accessory Kit #46-46351
- Optional Wall Mount Hanger Accessory Kit #46-46433
- Optional Wall Mount Hanger Kit #46-46508
- Self-Supported Stand Kit #46-46128
- Hard-Mount Accessory Kit #46-46351
- Hard-Mount Kits #46-46128, #46-46351 and MS951 Stand Replacements
- Failure Modes
- Configuration Modes
- Upgrading the Firmware
- Depth of Field
- IR Activation
- Applications and Protocols
- Troubleshooting Guide
- RS232 Demonstration Program
- Operational
- Environmental
- Default Settings
- Scanner Pinout Connections
- Cable Connector Configurations (Host End)
- Limited Warranty
- Contact Information
- Manual Date Code
Do you have a question about the Honeywell and is the answer not in the manual?
- Receive updates on solutions
- Get answers to your question
Question and answer
My MS9520 will beep continuously when my computer goes to sleep/hibernate. Is there a fix for this?
Can you turn up the volume on the beeping for the scanner?
My ms9520 makes the sound but doesn't read.
set up new scanner
The Honeywell MS9520/40 Voyager barcode readers are high-performing scanning devices suitable for various applications. With a light source of 4842 Lux, these barcode readers offer efficient and accurate scanning capabilities. Their scan speed of 72 seconds per page ensures swift data capture, enhancing productivity in retail, healthcare, and other sectors. Featuring a working distance of 1500 millimeters, these barcode readers allow users to conveniently scan barcodes from a considerable distance. The 650 nanometer wavelength ensures compatibility with a wide range of barcode types, including 1D codes commonly found on products and documents. With an input voltage of 5 volts, the Honeywell MS9520/40 Voyager barcode readers can easily connect to standard USB ports or other compatible devices. The dimensions of 198 x 78 x 56 millimeters make them compact and easy to handle, accommodating various workplace environments. Weighing just 149 grams, these barcode readers are lightweight, reducing user fatigue during extended scanning sessions. The Honeywell MS9520/40 Voyager barcode readers are designed with durability in mind. Constructed with premium materials, they can withstand rigorous usage and offer reliable performance over time. These barcode readers provide a versatile scanning solution for businesses seeking to improve their operational efficiency and streamline their barcode scanning processes. Overall, the Honeywell MS9520/40 Voyager barcode readers offer professional-grade scanning functionality. With their exceptional scanning capabilities, convenient working distance, and compact design, they provide a reliable and durable solution for various barcode scanning needs.
Other features
Ports & interfaces, weight & dimensions, performance, operational conditions.
Can't find the answer to your question in the manual? You may find the answer to your question in the FAQs about the Honeywell MS9520/40 Voyager below.
What is the weight of the Honeywell MS9520/40 Voyager?
The Honeywell MS9520/40 Voyager has a weight of 149 g.
What certifications does the Honeywell MS9520/40 Voyager have?
The Honeywell MS9520/40 Voyager has the following certifications: FCC Part 15, ICES-003, EN55022 Class B.
How do I connect the Honeywell MS9520/40 Voyager barcode reader to my computer?
To connect the barcode reader to your computer, you can use the provided USB cable. Simply plug one end of the USB cable into the barcode reader and the other end into an available USB port on your computer. The barcode reader should then be recognized and ready for use.
How can I configure the settings of the Honeywell MS9520/40 Voyager barcode reader?
To configure the settings of the barcode reader, you can take advantage of the barcode reader's configuration mode. Press and hold the CodeGate button for about five seconds until you hear three beeps. The barcode reader will then enter configuration mode, allowing you to scan various configuration barcodes to modify settings like enabling/disabling specific barcode types, adjusting volume, or changing the interface type.
How do I enable/disable the beeping sound of the Honeywell MS9520/40 Voyager barcode reader?
To enable or disable the beeping sound of the barcode reader, you can simply scan the appropriate barcode from the user manual. For example, you can locate the barcode that corresponds to "Scan Beep On" or "Scan Beep Off" in the manual and scan it using the barcode reader. This will toggle the beeping sound on or off according to your preference.
How can I reset the configuration of the Honeywell MS9520/40 Voyager barcode reader to default settings?
If you wish to reset the configuration of the barcode reader to its default settings, you can use the configuration barcode labeled "Factory Defaults" from the user manual. By scanning this barcode, the barcode reader will revert to its original default configuration, erasing any previous custom settings.
How can I perform a firmware update on the Honeywell MS9520/40 Voyager barcode reader?
To perform a firmware update on the barcode reader, you will need to download the latest firmware version from Honeywell's official website. Once you have the firmware file, follow the instructions provided in the firmware upgrade guide specific to the Honeywell MS9520/40 Voyager model. Typically, the process involves connecting the barcode reader to a computer and using a firmware update utility to install the new firmware onto the device.
Does the Honeywell MS9520/40 Voyager have a high light source intensity?
No, the Honeywell MS9520/40 Voyager has a light source intensity of 4842 Lux, which is considered to be moderate.
Is the scan speed of the Honeywell MS9520/40 Voyager fast?
Yes, the Honeywell MS9520/40 Voyager has a scan speed of 72 seconds per page, which is considered to be fast.
Does the Honeywell MS9520/40 Voyager have a long working distance?
Yes, the Honeywell MS9520/40 Voyager has a working distance of 1500 mm, which is considered to be long. This allows the user to scan barcodes from a greater distance.
Does the Honeywell MS9520/40 Voyager require a low input voltage?
Yes, the Honeywell MS9520/40 Voyager requires an input voltage of 5V, which is considered to be low. This means it can be easily powered by devices such as laptops or computers.
What are the dimensions of the Honeywell MS9520/40 Voyager?
The dimensions of the Honeywell MS9520/40 Voyager are 198 x 78 x 56 mm. This makes it a compact and portable barcode reader.
Is the manual of the Honeywell MS9520/40 Voyager available in English?
Yes, the manual of the Honeywell MS9520/40 Voyager is available in English .
Is your question not listed? Ask your question here
Honeywell Voyager MS9520
Honeywell MS9540 Voyager
Honeywell MS9540 VoyagerCG
Honeywell MS9590 VoyagerGS
Honeywell Voyager XP 1472g
Honeywell Voyager 1202G
Honeywell Voyager 1452g
Honeywell Voyager 1400g
Honeywell Voyager XP 1470g
Honeywell Voyager 1200g
- User Manual
Honeywell MS9520 User Manual
- Additional Resources
Configuring a Honeywell (Metrologic) Voyager Barcode Scanner (MS9520)
- Use the codes below to configure a Honeywell (Metrologic) Voyager (MS9500) barcode scanner to work with SEOM .
- The quality of the printer used to print these codes can affect the scanner’s ability to read the codes. Please use the printer that creates the best quality output.
- It is also helpful to fold the printed sheet in half when scanning the codes to prevent the scanner from accidentally reading the code on the other side of the sheet.
Scanner Configuration Codes
Link to printable PDF Scan sheet download or see attachment below.
Printable scan sheet
Article Attachments
- .pdf Honeywell_Barcode_Config 143 KB
Was this article helpful?
Related articles.
- APG Series 100 Cash Drawer
- Shipping Scale Setup
- POS Receipt Printers
- Magtek Mini Swipe Card Reader
- Magnetic Stripe Readers
- Honeywell 3800i Barcode Scanner
- Metrologic Manuals
- Barcode Reader
- MS9500 Voyager Series
- Installation and user manual
Metrologic MS9500 Voyager series Installation And User Manual
- Installation and user manual (56 pages)
- Product manual (6 pages)
- Specification sheet (2 pages)
- page of 56 Go / 56
Table of Contents
- Troubleshooting
- Introduction
- Scanner and Accessories
- RS232, OCIA, Laser Emulation, and Light Pen Emulation
- Keyboard Wedge
- Stand Alone Keyboard
- Integrated USB Full Speed
- Disconnecting
- How to Use Codegate ® and the Manual Activation Mode
- Three Modes of Operation
- Scanner Parts
- Audible Indicators
- Visual Indicators
- Failure Modes
- Serial Configuration
- Configuration Modes
- Abbreviated Ascii Table
- Upgrading the Flash ROM Firmware
- Maintenance
- Depth of Field
- IR Activation
- Applications and Protocols
- Troubleshooting Guide
- RS232 Demonstration Program
- Operational
- Environmental
- Default Settings
- Scanner Pinout Connections
- Cable Connector Configurations
- Limited Warranty
- Laser and Product Safety
- Contact Information and Office Locations
Advertisement
Quick Links
- 1 Installing the Scanner to the Host System
- 2 Configuration Modes
- Download this manual
Related Manuals for Metrologic MS9500 Voyager series
Summary of Contents for Metrologic MS9500 Voyager series
- Page 2 Copyright © 2005 by Metrologic Instruments, Inc. All rights reserved. No part of this work may be reproduced, transmitted, or stored in any form or by any means without prior written consent, except by reviewer, who may quote brief passages in a review, or provided for in the Copyright Act of 1976.
Page 3: Table Of Contents
- Page 4 ABLE OF ONTENTS IR Activation......................25 Applications and Protocols ..................26 Troubleshooting Guide ..................27 RS232 Demonstration Program................30 Design Specifications Operational ......................31 Mechanical.......................32 Electrical ......................32 Environmental ....................32 Default Settings....................33 Scanner and Cable Terminations Scanner Pinout Connections ................38 Cable Connector Configurations..............40 Limited Warranty....................43 Laser and Product Safety ..................44 Patents.........................46 Index ........................47 Contact Information and Office Locations............49...
Page 5: Introduction
Page 6: scanner and accessories.
- Page 7 CANNER AND CCESSORIES PTIONAL CCESSORIES Part # Description OCIA PowerLink Cable with Built in Power Jack 53-53015x-3 2.7 m (9 ft.) coiled cord, long strain relief, black USB Power/Communication Cable, Locking Type A 53-53213x -N-3 2.7 m (9 ft.) coiled cord, long strain relief, black USB Power/Communication Cable, Locking Type A 4.5 m (15 ft.) coiled cord, long strain relief, black 53-53214x -N-3...
Page 8: Installing The Scanner To The Host System
Page 9: ibm 46xx, page 10: keyboard wedge, page 11: stand alone keyboard, page 12: integrated usb full speed, page 13: the powerlink cable, page 14: the ms9540 voyagercg ® series, page 15: stand kits, page 16: assembly.
- Page 17 SSEMBLING THE TAND Stand Option 2: Hard-Mount Kits #46-46128, #46-46351 and MS951 Stand Replacements Anchor from Step 3 Kit #46-46128 Screw the stand anchor ( 50-50449) MLPN Base Assembly from onto the base assembly until it sits flush. Kit #46-46351 or MS951 Stand Base Figure 19.
- Page 18 SSEMBLING THE TAND Wall Mount, Option 1: For Kit #46-46433 or #46-46508 Step 1 Drill two #39 pilot holes 3.00” apart. Step 2 Attach the Wall Mount Hanger to the wall with the two #8 wood screws provided. Figure 24. Wall Mount, Option 2: Kit #46-46508 Step 1...
Page 19: Scanner Parts
Page 20: audible indicators, page 21: visual indicators, page 22: failure modes, page 23: configuration modes.
- Page 24 ONFIGURATION ODES During configuration, the motor and laser turn off. YOU CANNOT SCAN A BAR CODE WHILE IN SERIAL CONFIGURATION MODE. There is a 20 second window between commands. If a 20 second timeout occurs, the scanner will send a [nak] and you must start over. To enter serial configuration mode, send the following command [stx]999999[etx].
Page 25: Abbreviated Ascii Table
Page 26: upgrading the flash rom firmware, page 27: labels, page 28: depth of field, page 29: ir activation, page 30: applications and protocols, page 31: troubleshooting guide.
- Page 32 ROUBLESHOOTING UIDE Symptoms Possible Causes Solution The bar code being Verify that the bar code being The unit powers scanned does not scanned falls into the configured up, but does not satisfy the configured criteria. scan and/or criteria for character beep.
- Page 33 ROUBLESHOOTING UIDE Symptoms Possible Causes Solution Make sure that the proper PC type The unit scans The unit’s AT, PS2 or XT is selected. Verify but the data is configuration is not the correct country code and data not correct. correct.
Page 34: Rs232 Demonstration Program
Page 35: design specifications, page 36: mechanical, page 37: default settings.
- Page 38 EFAULT ETTINGS Light Laser Parameter Default OCIA RS232 KBW USB 46xx Emulation Mod 43 Check on Code 39 MSI-Plessy 10/10 Check Digit MSI-Plessy Mod 10 Check Digit Paraf Support ITF ITF Symbol Lengths Variable Minimum Symbol Length Symbol Length Lock None Bars High as Code 39 Spaces High as Code 39...
- Page 39 EFAULT ETTINGS Light Laser Parameter Default OCIA RS232 KBW USB 46xx Emulation Same symbol rescan timeout: 750 msecs Same symbol rescan timeout: 875 msecs Same symbol rescan timeout: 1000 msecs No Same symbol timeout Infinite Same symbol timeout Inter-character delay 1 msecs Configurable in 1 msec steps 10 msecs...
- Page 40 EFAULT ETTINGS Light Laser Parameter Default OCIA RS232 KBW USB 46xx Emulation Transmit Sanyo ID Characters Nixdorf ID LRC Enabled UPC Prefix UPC Suffix Carriage Return Line Feed-Disabled by default in KBW Tab Prefix Tab Suffix “DE” Disable Command “FL” Laser Enable Command DTR Handshaking support RTS/CTS Handshaking...
- Page 41 EFAULT ETTINGS Light Laser Parameter Default OCIA RS232 KBW USB 46xx Emulation 100 msec to Find Supplement Configurable in 100 msec steps (max 800 msec) Coupon Code 128 code code 39 † Configurable Code Lengths 7 avail † Code Selects with configurable Code Length 3 avail Locks...
Page 42: Scanner And Cable Terminations
- Page 43 CANNER AND ABLE ERMINATIONS MS95x0-9 OCIA Function Ground RS232 Transmit Output RS232 Receive Input RDATA RDATA Return Clock In Clock Out Clock in Return/Clock out Rtrn +5VDC Shield Ground MS95x0-00 Laser Emulation Function Ground RS232 Transmit Output RS232 Receive Input Flip Sense/Start of Scan Output Proximity Detect/Trigger...
Page 44: Cable Connector Configurations
- Page 45 CANNER AND ABLE ERMINATIONS Cable Connector Configurations (Host End) USB Cables 53-53213x-N-3, 53-53214x-N- MLPN 3 or 53-53235x-N-3 Function PC +5V/V_USB Locking Non-Locking Ground Type A Type A Shield Shield Stand-Alone Keyboard PowerLink Cable 53-53020x-3 MLPN Function PC Data Power Ground +5VDC PC Power to KB 6-Pin Male Mini-DIN Connector PC Clock...
- Page 46 CANNER AND ABLE ERMINATIONS Cable Connector Configuration (Host End) Keyboard Wedge PowerLink Cable 53-53002x-3 MLPN Function Keyboard Clock Keyboard Data No Connect Power Ground 5-Pin DIN, Female +5 Volts DC Function PC Data No Connect Power Ground +5 Volts DC 6-Pin DIN, Male PC Clock No Connect...
Page 47: Limited Warranty
Page 48: laser and product safety.
- Page 49 ASER AND RODUCT AFETY Caution Caution Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous laser light exposure. Under no circumstances should the customer attempt to service the laser scanner. Never attempt to look at the laser beam, even if the scanner appears to be nonfunctional.
Page 50: Patents
Page 51: index.
- Page 52 NDEX Parameter ......33–37 Termination......6, 38–42 Pin Assignments ....38–42 Tones........16–18 Power Supply.. 2, 4–8, 9, 22, 27, 32 Troubleshooting.....27–29 PowerLink ......4–9, 42 Protocols ....See Interfaces UL ........ See Caution USB ......See Interfaces Razzberry Tone ..See Indicators Red LED ....See Indicators Repair ..........43 Ventilation ........32 RMA ..........43...
- Page 54 OTES...
- Page 56 October 2005 Printed in the USA 0 0 - 0 2 4 1 0 H...
This manual is also suitable for:
Rename the bookmark, delete bookmark, delete from my manuals, upload manual.
IMAGES
VIDEO
COMMENTS
Configuration Guide . iii Table of Contents Introduction ... MS9520 Voyager ... MS9520/9540-00 Laser Emulation Mode ..... 17 - 4 MS9524 and MS9544 VoyagerPDF ® ...
View and Download Metrologic MS9520 installation and user manual online. MS9500 Voyager Series Single-Line Hand-Held Laser Scanner. ... Barcode Reader Metrologic MS9530 Voyager RF Series Quick Configuration Manual. Radio frequency barcode reader (3 pages) ... All Interfaces MS9500 Series Troubleshooting Guide Symptoms Possible Causes Solution ...
MS9520 or MS9540 Voyager Bar Code Scanner or VoyagerCG Bar Code Scanner with CodeGate 00-02544 MetroSelect Single-Line Configuration Guide* 00-02410 MS9500 Voyager Series Single-Line Hand Held Laser Scanner User's Guide* * Available for download at - www.honeywellaidc.com OPTIONAL ACCESSORIES Part # Description 53-53000x-3
Configuration Guide . Disclaimer Honeywell International Inc. ("HII") reserves the right to make changes in ... Omniplanar, MetroSet2, Metrologic, MetroSelect, RangeGate, CodeGate, CodeSelect, Voyager, VoyagerCG, VoyagerBT and Focus are trademarks or ... MS9520 Voyager ® and MS9540 ...
Scan the Enter/Exit Programming bar code to begin. Then scan the 3 digit decimal equivalent of the ASCII character into the appropriate character location with the code byte bar codes (see Code Bytes, end of document). To save, scan the Enter/Exit Programming bar code again. Example: To add an asterisk (*) as a prefix, scan the bar codes: Enter ...
The Honeywell Voyager MS9520 barcode reader is a reliable and durable device used for scanning barcodes. With its 650nm wavelength, it accurately captures barcode information for efficient data collection. The barcode reader is equipped with a standard USB interface, allowing for easy connectivity to various devices.
View and Download Metrologic MS9520 Voyager product manual online. MS9500 SERIES. MS9520 Voyager barcode reader pdf manual download. Also for: Ms9524 voyager, Ms9544 voyager, Ms9540 voyager, Ms9521 voyager, Ms9541 voyager, Ms9535 voyager. ... Ms9530 series voyager rf single line hand-held rf bar code scanner installation and user's guide (20 pages)
Honeywell's MS9500 Voyager® series of hand-held (single-line) laser scanners offers the user an aggressive solution for scanning all standard 1D bar codes including GS1 DataBarTM (RSS) bar codes. The MS9500 series is equipped with both in-stand and out-of-stand operation enabling hand-held or fixed projection scanning.
With an input voltage of 5 volts, the Honeywell MS9520/40 Voyager barcode readers can easily connect to standard USB ports or other compatible devices. The dimensions of 198 x 78 x 56 millimeters make them compact and easy to handle, accommodating various workplace environments. Weighing just 149 grams, these barcode readers are lightweight ...
NTRODUCTION Scanner and Accessories Part # MS9520 Voyager Bar Code Scanner MS9540 VoyagerCG Bar Code Scanner with CodeGate 00-02544 MetroSelect Single-Line Configuration Guide* MS9500 Voyager Series Single-Line Hand Held Laser 00-02410 Scanner Installation and User's Guide* Available for download on the Metrologic website - www.metrologic.com ...
Part #. Description. MS9500. 00-02561 or 00-02544. 00-02410. Voyager Series Scanner. MetroSelect Programming Guide* or MetroSelect Single-Line Programming Guide*. MS9500 Voyager® Series Single-Line Hand Held Laser Scanner Installation and User's Guide. * Available on the Metrologic website - www.metrologic.com.
Page 114 f. Page 115 f. Page 116 Honeywell Scanning & Mobility 9680 Old Bailes Road Fort Mill, SC 29707 www.honeywellaidc.com 00-02544 Rev K 2/11 f. MS9520 - read user manual online or download in PDF format. Pages in total: 116.
The Voyager™ MS9500 Series single-line hand-held scanners include both the MS9520 and MS9540. The Voyager MS9540 features Metrologic's patented CodeGate™ technology. CodeGate is an intuitive scanning system that is ideal for all scanning applications, including menu-scanning, point-of-sale, document processing, and inventory control.
Metrologic MS9520 Voyager Pdf User Manuals. View online or download Metrologic MS9520 Voyager Product Manual, Specification Sheet ... Configuration Modes. 24. Upgrading the Flash ROM Firmware. 27. Depth of Field. 28. IR Activation Range. 29. Applications and Protocols. 30. ... Trouble Shooting Guide. 29. R232 Demonstration Program. 34. Appendix ...
MS9520 - xx or MS9540 - xx Voyager or VoyagerCG Bar Code Scanner 00-02544 MetroSelect Single-Line Configuration Guide* 00-02410 MS9500 Voyager Series Single-Line Hand Held Laser Scanner Installation and User's Guide* * Available for download on the Metrologic website - www.metrologic.com OPTIONAL ACCESSORIES Part # Description
Overview. Use the codes below to configure a Honeywell (Metrologic) Voyager (MS9500) barcode scanner to work with SEOM. The quality of the printer used to print these codes can affect the scanner's ability to read the codes. Please use the printer that creates the best quality output. It is also helpful to fold the printed sheet in half when ...
Metrologic's MS9520 Voyager with a futuristic design and high-performance ... guide for measuring hand-held laser bar code scanners, MS9520 Voyager. Flash ROM allows the firmware to be upgraded easily, and as software updates become available, ... MS9520 Voyager ® is an advanced auto-trigger, single line laser bar ...
All MS9520-00/MS9540-00 scanners leave the factory with the Laser Emulation Mode enabled. If you recall defaults while re-configuring your scanner the Laser Emulation Mode will no longer be enabled. Refer to the MS9520/9540-00 Laser Emulation Mode section of the MetroSelect Single-Line Configuration Guide for information on enabling the Laser ...
METROLOGIC MS9520 EPOS CONFIGURATION SHEET SCAN ALL BARCODES IN THE NUMERIC ORDER 01 Scan the Recall Default bar code. This will erase all previous settings and return the scanner to its default communication protocol. s will load keyboard wedge defaults. 02 Scan the enter/exit configuration mode bar code (3 beeps).
Honeywell Voyager MS9520 Installation Instructions. 1. Admin rights on the computer you are installing the scanner on. 2. An availible USB port on the computer or powered USB Hub. 3. Access to the notepad application on your computer to test the scanner after install.
Metrologic provides a wide range of configurable features that may be selected with the use of this bar code configuration guide. Once the configuration is completed, the scanner stores the settings in nonvolatile memory or NOVRAM. NOVRAM saves the settings when the power is turned off. Symbol Key * (asterisk) Default Feature ~ (tilde)
NTRODUCTION ® Metrologic's MS9520 Voyager and the MS9540 VoyagerCG are a group of single-line laser bar code scanners that have the ability to decode all standard 1D, RSS-14, RSS Limited and RSS Expanded bar codes. ... xx 00-02544 MetroSelect Single-Line Configuration Guide MS9500 Voyager Series Single-Line Hand Held Laser 00-02410 Scanner ...
Configuration Guide. ii LOCATIONS CORPORATE HEADQUARTERS NORTH AMERICA EUROPEAN, MIDDLE EAST & AFRICAN HEADQUARTERS USA, NEW JERSEY GERMANY, MUNICH Metrologic Instruments, Inc. Metrologic Instruments GmbH Tel: 1-800-ID-METRO Fax: 856-228-6673 Tel: 49-89-89019- Fax: 49-89-89019-200 ... MS9520 Voyager ® & MS9540 VoyagerCG ...